MUNBYN Counterfeit Detector User Manual
- June 7, 2024
- MUNBYN
Table of Contents
MUNBYN Counterfeit Detector
Overview
Preface
Thank you for purchasing our products. The IMC02 is the best solution for the
banknote counterfeit detection.
This user manual describes the operation steps and precautions for this
product. In order to improve the use and working efficiency of the product,
please read this manual carefully before using, so as to operate the product
accurately. Please contact us if you encounter any problem.
We reserve the right to change the contents of this user manual at any time
without notice.
Packing Open and Installation
When you receive the package, open and check the packing list in the package.
Power Supply
DC Power: Connect the power adapter to a 110V or 220V outlet, then
connect the terminal to the machine’s DC12V input socket.
Lithium Battery (optional) : When the battery was fully charged, the
machine can work without power adapter.
Operating Instructions
Turn on the IMC02 by switch the power switch button to on, the screen will
light up and the machine will start self-testing. If the self-test is
successful, the number of banknote and the denomination will show as ‘0’.
Turn off the IMC02 by switch the power switch to off. When the screen lights
off, it means the machine has been turned off successfully.
Button Functions
CUR/DIR
The CUR/DIR button is used to choose the currency or the banknote exit
direction.
Choosing the Currency
In the detection mode, the IMC02 will recognize the currency type
automatically, so pressing “CUR/DIR” button cannot choose the currencies
manually. In the report mode, press the button to choose the currencies to
check the report detail.
Choosing the Direction
Keep pressing the button about 2 seconds until you hear the “di” sound, then
release the button. The direction indicator will be changed.
The denotation of direction will be shown on the top part of the display. Up
means the genuine banknote will go out from exit and down means the genuine
banknote will retreat from the feeding hopper.
REP/CLR
Press the button to check the pieces of each denomination, keep pressing the
button for about 2 seconds to clear the records.
After finish detecting banknotes, press “REP / CLR” to enter report mode. Display will show the currency type, pieces of each denomination and total value. You can switch to another currency by pressing “CUR / DIR”. While checking the record, if you feed banknote, the detector will automatically exit the report mode.
Inserting the Banknote Correctly
As shown in the following pictures, please insert the banknotes in; the left
side. If a banknote was incorrectly inserted, the IMC02 may refuse it and
alert.
EUR/GBP Currency Detecting
As shown in the following figures, please remove the banknote feeding limit block to adjust the banknote with bigger size.
Maintenance
E01 Length exceeds
E02 Length alarm Please check whether the banknote is in good condition
and place the banknote to the left again. If the alarm continues , length
calibration is required.
E03 Half a banknote Please check if the banknote is complete.
E06 Double banknote Please put in only one banknote.
E07 Tilted banknote Please put the banknotes to the left.
E 10 Failed to refund Please check if your banknotes are too old or too
soft.
E11 Basic image error This may be a counterfeit currency. Please check
whether the banknotes are damaged, severely wrinkled, or dirty.
E40 UV Please turn on the machine and clean the inside of the machine
before checking banknotes. If the error continues, it means that the UV module
has been damaged.
Inaccurate Detection of Currency Detector
There are several conditions to affect the accuracy of the currency detector.
- The bill size is out of the range according to IMC02 specification.
- The banknote is damaged with different ways such as lack of corner, tape, hole, tear and folded. As shown in Figure 4-1, it is not recommended to count this kind of bills.
- Other abnormal operation or there is unknown thing inside the IMC02.If something inside the IMC02, you need to open the front cover to check, and clean the internal sensors.
Technical Parameters
OUTLOOK: [email protected]
Whatsapp: +86-17817881067