VIVO Electric Hot Dog Machine with Sanitation Hood Instruction Manual

Five Roller Electric Hot Dog Machine
with Sanitation Hood
Instruction Manual

SKU: HOTDG-V205

https://vivo-us.com/products/hotdg-v205
Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product.

GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

help@vivo-us.com

www.vivo-us.com
Chat live with an agent!

309-278-5303

WARNING:

IMPORTANT SAFETY INFORMATION

READ AND FOLLOW ALL SAFETY REQUIREMENTS

KEEP THIS MANUAL IN A SAFE AND DRY PLACE FOR FUTURE REFERENCE
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual and do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly, or inappropriate use.

• ALL MINORS MUST BE SUPERVISED WHILE THE MACHINE IS IN OPERATION.
• THIS APPLIANCE IS NOT INTENDED FOR USE BY PERSONS (INCLUDING CHILDREN) WHOSE PHYSICAL, SENSORY, OR MENTAL CAPABILITIES MAY BE DIFFERENT OR REDUCED, OR WHO LACK EXPERIENCE OR KNOWLEDGE UNLESS SUCH PERSONS RECEIVE SUPERVISION OR TRAINING TO OPERATE THE APPLIANCE BY A PERSON RESPONSIBLE FOR THEIR SAFETY.
• BEFORE USING THE HOTDOG MACHINE, CHECK MOVING PARTS FOR ANY BINDING OR MISALIGNMENT. TAKE NOTE OF ANY OTHER CONDITIONS THAT MAY AFFECT THE OPERATION OF THE PRODUCT.
• HOTDOG MACHINE SHOULD ONLY BE USED ON A FLAT, STABLE WORK SURFACE
• ALWAYS ENSURE THAT THIS MACHINE IS PLUGGED INTO A GROUNDED OUTLET WITH THE PROPER POWER SUPPLY AVAILABLE.
• DO NOT UNPLUG THE MACHINE BY PULLING OR TUGGING ON THE POWER CORD. FIRMLY GRASP PLUG AND REMOVE FROM OUTLET.
• MAKE SURE THE MACHINE IS UNPLUGGED WHEN CONDUCTING ANY MAINTENANCE OR REPAIR. A QUALIFIED TECHNICIAN SHOULD ALWAYS PERFORM SERVICE OR REPAIR.
• ALWAYS KEEP THE MACHINE UPRIGHT WHEN STORING AND TRANSPORTING.

KEEP OUT OF REACH OF CHILDREN: NEVER OPERATE MACHINE UNATTENDED.
WARNING: DO NOT USE DETERGENT WHEN CLEANING. ANY REMAINING  DETERGENT RESIDUE WILL POLLUTE THE HOT DOGS. DO NOT LET THE MACHINE SOAK IN WATER, AS THIS WILL DAMAGE THE ELECTRICAL COMPONENTS.
WARNING: DO NOT USE A HOTDOG MACHINE WHILE UNDER THE INFLUENCE OF DRUGS OR ALCOHOL.

WARNING: ELECTRICAL SHOCK HAZARD.

• KEEP WATER AND OTHER LIQUIDS AWAY FROM ENTERING INSIDE EQUIPMENT.  FAILURE TO DO SO MAY RESULT IN A SHORT CIRCUIT OR AN ELECTRICAL SHOCK
• DO NOT USE EQUIPMENT IF THE POWER CORD IS DAMAGED OR HAS BEEN MODIFIED.
• MAKE SURE THAT YOUR UNIT IS PROPERLY GROUNDED. IF YOU DO NOT HAVE A GROUNDED OUTLET, CALL A QUALIFIED TECHNICIAN TO INSTALL IT.

CAUTION: FOLLOW INSTRUCTIONS TO PREVENT INJURIES.

• BURN HAZARD. DO NOT TOUCH HOT FOOD, LIQUID, OR HEATING SURFACES WHILE EQUIPMENT IS HEATING OR OPERATING.
• TURN OFF, UNPLUG, AND ALLOW THE MACHINE TO COOL OFF BEFORE CLEANING OR MOVING.
• BE CAUTIOUS OF SHARP EDGES.

WARNING: DO NOT USE THE HOTDOG MACHINE IN WAYS FOR ANYTHING OTHER THAN ITS INTENDED USE. DO NOT MODIFY THIS PRODUCT. FAILURE TO DO SO MAY RESULT IN INJURY OR PRODUCT DAMAGE.

WARNING: DO NOT OPERATE MACHINES NEAR EXPLOSIVE ATMOSPHERES, SUCH AS IN THE PRESENCE OF FLAMMABLE LIQUIDS, GASES, OR DUST.

ELECTRICAL DATA

PRODUCT SPECIFICATIONS

PREPARATION

Carefully remove all contents from the container. Please review package contents to ensure all parts are included in order to fully assemble the appliance.

PACKAGE CONTENTS

PRODUCT FUNCTION

This equipment is only intended to heat PRECOOKED FOODS and hold at proper serving temperature. It is not intended or designed to cook raw food. Heat to 140 degrees (approx 20 minutes at 350 degrees Fahrenheit.)

PRODUCT STRUCTURE

ASSEMBLY STEPS

STEP 1

Remove the four screws, two on each side, from the top inner area of the hot dog roller.

STEP 2
Place the front glass mount onto the machine and reinsert the screw without tightening completely in this step.
STEP 3
Place the other front glass mount and the two rear-side glass mounts onto the machine in the same manner as step 2.
NOTE: The heating indicator light will turn back on if

STEP 4
Take one of the glass side panels and fit it into one of the glass mounts. After adjusting side panel to fit snugly into mount, tighten the screws to secure glass panel. Repeat step for the other side.

STEP 5
Slide the curved top glass into the rear side glass mounts and push into place without it being too snug. Make sure that they are evenly leveled before tightening the screw.

STEP 6
While placing the front stainless steel trim rail onto the edge of the top glass, make sure the holes on the ends of the trim rail are aligned with the holes in the top corners of the side glass.

STEP 7
Secure the front stainless trim rail to the side glass with the nuts and bolts.

OPERATING INSTRUCTIONS

IMPORTANT:
Before initial use, turn the temperature dial on to maximum capacity and allow equipment to burn in for 30 minutes. Equipment should then be ready for use.
To use the machine:
1. Add a small amount of vegetable oil to both ends of the rollers. This will allow the rollers to spin smoothly. Avoid using non-stick sprays.
2. Turn on the power switch.
3. Turn the temperature control to desired temperature setting for the front and/or back rollers. The heating indicator light will turn on while preheating. Light will turn off once heat reaches desired temperature setting.

WARNING: KEEP HANDS CLEAR OF MOVING PARTS TO REDUCE RISK OF INJURY

NOTE: The heating indicator light will turn back on if the temperature begins to drop to ensure hot dog quality heating.

FOOD SAFETY PRECAUTION:
OPERATE WITH CARE.
Monitor food temperature closely for food safety. The United States Food & Drug Administration recommends that hot food should be kept at a internal temperature of 140°F (60°C) or more to help prevent bacteria growth.
1. Set precooked food product onto rollers.
2. Switch power to OFF after use.
3. Remove food product and discard or properly store as guided by the instructions of the food product manufacturer.

CARE & MAINTENANCE

CLEANING
TO MAINTAIN PRODUCT APPEARANCE AND LONGEVITY OF SERVICE, CLEAN EQUIPMENT AFTER EACH USE.

CAUTION: ROLLERS WILL BE HOT. Allow hot surfaces to cool before handling to prevent burning skin.
1. Make sure power is off before cleaning rollers.
2. Use a clean, dry cloth to wipe rollers.
3. Use a damp cloth or sponge dipped with soapy water to wipe outside of equipment.
4. Dry thoroughly after cleaning.
5. Remove and clean grease tray. Place tray back into equipment when dry.

NOTE: Do not immerse machine in water. It may cause product damage.

STORAGE

After use, store machine in a dry place away from moisture and flammable materials, fumes and chemicals for preservation. Cover machine when stored for long periods of time to avoid dust buildup.

WARRANTY

We offer a ONE-YEAR warranty for this product. If you have any problems with the machine, please contact us directly. We have a 30 Day Return Policy.

Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us

LAST UPDATED: 02/28/2021
REV 1.1

Open Monday – Friday 7:00am – 7:00pm CST,
our dedicated support team can offer immediate assistance with rapid response times. If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product.

help@vivo-us.com

www.vivo-us.com
Chat live with an agent!

309-278-5303

AVG. RESPONSE TIME (within office hrs): 1HR 8M
– 23% within < 15m
– 38% within < 30m
– 61% within < 1hr
– 83% within < 2hr
– 92% within < 3hr

AVG. RESOLUTION TIME (within office hrs): < 15 M

AVG. RESOLUTION TIME (within office hrs): 5M 4S

FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>