VAXCEL Cascadia T0680 Tucson 1 Light Integrated LED Farmhouse Outdoor Wall Lantern Instruction Manual

October 30, 2023
VAXCEL

ASSEMBLY AND INSTALLATION
INSTRUCTIONS
T0679 / T0680

Cascadia T0680 Tucson 1 Light Integrated LED Farmhouse Outdoor Wall

Lantern

WARNING: Turn off the main power at circuit breaker before installing fixture.
NOTE:

  1. Before installing, consult local electrical codes for wiring and grounding requirements.
  2. READ AND SAVE THESE INSTRUCTIONS.
  3. When handling the fixture, do not apply pressure to the LEDs.

Hardware Package (included):

VAXCEL Cascadia T0680 Tucson 1 Light Integrated LED Farmhouse Outdoor Wall
Lantern - Hardware

Installation Steps

Turn off the power at fuse or circuit box

  1. Unscrew the two bolt nuts (D). Remove the two rubber pads (E) and the crossbar unit (A) from the backplate.

  2. Attach the crossbar unit (A) to the outlet box by using two mounting screws (B). Adjust the length of the preinstalled fixture mounting screws if necessary.
    Note: Make sure that the fixture mounting screws are lined up horizontally to make the fixture level.

  3. Pull out the source wires from the outlet box. Make wire connections using wire connectors (C) as follows:
    • Connect the hot wire (black insulation) from the fixture to the black wire from the power source.
    • Connect the neutral wire (white insulation) from the fixture to the white wire from the power source.
    • Attach the fixture ground wire (bare wire) to the crossbar unit (A) with the green ground screw. Then depending on local code, connect it to the house ground wire with the wire connector (C).  Carefully put all of the wires back into the outlet box.

  4. Attach the backplate of the fixture to the crossbar unit (A) by inserting fixture mounting screws into set holes on the backplate, then secure it with two rubber pads (E) and two bolt nuts (D).
    Note: With silicone caulk compound, caulk completely around where the backplate meets with the wall surface to prevent water from seeping into the outlet box.

Turn on the power at fuse or circuit box.
The following parts are available for re-order if damaged or missing.
Spare Parts List:

VAXCEL Cascadia T0680 Tucson 1 Light Integrated LED Farmhouse Outdoor Wall
Lantern - Parts List

221101

Documents / Resources

| VAXCEL Cascadia T0680 Tucson 1 Light Integrated LED Farmhouse Outdoor Wall Lantern [pdf] Instruction Manual
T0679, T0680, Cascadia T0680, Cascadia T0679, Cascadia T0680 Tucson 1 Light Integrated LED Farmhouse Outdoor Wall Lantern, Tucson 1 Light Integrated LED Farmhouse Outdoor Wall Lantern, 1 Light Integrated LED Farmhouse Outdoor Wall Lantern, LED Farmhouse Outdoor Wall Lantern, Farmhouse Outdoor Wall Lantern, Outdoor Wall Lantern, Wall Lantern, Lantern
---|---

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

VAXCEL User Manuals

Related Manuals