Enerlites 61150 A2C5 CU Series Three Ultra High Speed USB Charger Ports Instruction Manual

Enerlites 61150 A2C5 CU Series Three Ultra High Speed USB Charger Ports

Product Information

The 61150-A2C5-CU is a 15A Tamper Resistant Receptacle with Three Ultra High Speed USB Charger Ports. It is designed for installation in accordance with the National Electric Code and local regulations. This device should be installed by a qualified electrician. It is important to turn off the circuit breaker or fuse(s) and ensure that the power is off before wiring the device. This USB receptacle cannot be used if the outlet being replaced has the top and bottom outlets controlled by separate circuit breakers. The receptacle is compatible with a wide range of electronic devices.

Installation Instructions

1. Turn off power at the circuit breaker.
2. Identify the HOT, NEUTRAL, and GROUND wires in the wall box.
3. Insert the wires into the terminal holes on the back side of the receptacle.
4. Tighten the terminal screws to clamp the wires in place.
5. Connect the wires as follows

Compatibility
This USB Charger/Tamper-Resistant Receptacle is compatible with a wide range of electronic devices including, but not limited to, the following

• [List of compatible electronic devices]

Warranty Information
This product comes with a warranty. For more information, visit www.enerlites.com.

SPECIFICATIONS

• Receptacle Rating……………………………………………………………… 15 Amp, 125VAC
• USB Rating……………………………………..Three USB ports with total 5.8 Amp, 5VDC
• USB Type A Rating……………………………………………………………………….2.4A @ 5V
• USB Type C Rating……………………………………………………………………….3.0A @ 5V
• Wire Terminals……………………………………………………………………….#14–#12 AWG
• Operating Temperature……………………………………………. -4 to 140°F (-20 to 60°C)
• USB Compatibility……………….. USB 1.1/2.0/3.0 devices, including Apple products
• Receptacle Dimension …………………………………………………..3-3/4”×2-1/4”×3-3/16”

DESCRIPTION
61150-A2C5-CU is the Industry’s first 5.8A, 5VDC triple USB charger with a single 15A tamper resistant receptacle. Our High Speed USB ports deliver the most advanced charging technology and optimize current by using a smart chip to reduce charging time to devices. Our High Speed USB chargers give you the ability to charge virtually any device without the use of bulky adapters that can be lost or misplaced, while continuing to power traditional appliances, e.g. lamp or television with the same receptacle.

FEATURES

• Industry’s first Triple USB Modular High Speed charger at 5.8 Amp, 5VDC.
• Swappable USB modules option for upgrades or replacements.
• Charges most USB compatible devices directly without an adapter.
• 2011 NEC Code compliant Tamper-Resistant Shutters.
• Replaces a standard duplex receptacle.

WARNING

• Turn the POWER OFF at the circuit breaker before installing the receptacle.
• Read and understand these instructions before installing. This device is intended for installation in accordance with the National Electric Code and local regulations. It is recommended that a qualified electrician performs this installation. Make sure to turn off the circuit breaker or fuse(s) and make sure power is off before wiring the device.
• Use copper wire only.
• This USB receptacle CANNOT be used if the outlet you are replacing has the top and bottom outlets controlled by separate circuit breakers.

WIRING DIRECTIONS

1. Turn off power at circuit breaker.
2. Identify the HOT, NEUTRAL, and GROUND wires in the wall box.
3. Insert wires into the terminal holes on the back side of the receptacle, then tighten the terminal screws to clamp wires in place.

COMPATIBILITY
This USB Charger/Tamper-Resistant Receptacle is compatible with a wide range of electronic devices including, but not limited to, the following

• iP ®ad Pro
• iPad® Air
• iPad ® Mini
• iPod
• ®iPhone 6/ 6 Plus
• Tablets
• Mobile Phones
• Bluetooth ™ Headsets
• Digital Cameras
• HTC One X9
• HTC One S9
• Samsung Galaxy S4™
• Samsung Galaxy Note 3™
• Samsung Galaxy J7™
• Galaxy Tab™ Other Smart Phones and USB Compatible products

WARRANTY INFORMATION

This device is warranted to be free of material and workmanship defects for 2 years from the date of purchase. Original receipt or proof of purchase from an authorized retailer must be presented upon warranty claim. ALL claims must be verified and approved by Enerlites, Inc. Warranties from other Enerlites products may vary. This warranty is nontransferable and does not cover normal wear and tear or any malfunction, failure, or defect resulting from misuse, abuse, neglect, alteration, modification, or improper installation. To the fullest extent permitted by the applicable state law, Enerlites shall not be liable to the purchaser or end user customer of Enerlites products for direct, indirect, incidental, or consequential damages even if Enerlites has been advised of the possibility of such damages. Enerlites’ total liability under this or any other warranty, express or implied, is limited to repair, replacement or refund. Repair, replacement or refund are the sole and exclusive remedies for breach of warranty or any other legal theory.

• © 2022 Enerlites Inc. CA, U.S.A.
• WWW.ENERLITES.COM 0211220215
• REV 20230803

References

• Manufacturing Lighting Controls & Wiring Devices - Enerlites

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>