NXT TECHNOLOGIES 2.4G Wireless Keyboard and Mouse User Manual

NXT TECHNOLOGIES 2.4G Wireless Keyboard and Mouse

Keyboard Combined Keys Function

The keys above are based on Windows 10 system,it may vary slightly based on different brand devices and operating system versions.

CONNECTING THE KEYBOARD AND MOUSE

1. Keyboard:Open the battery cover and insert 1 x AAA battery. Mouse:Open the battery cover and insert 1 x AA battery.
2. Turn switch on mouse to ON to connect to the device.
3. Insert the USB nano receiver(could be stored inside the mouse)into your computer’s USB port

FEATURES

• USB nano receiver can be stored inside the mouse under the battery compartment cover.
  Maximum wireless range of up to 8 meters.

• USB nano receiver supports plug&play functionality.

• After approximately 30 minutes of inactivity,the keyboard and mouse will automatically enter sleep mode.Press any button to wake up the keyboard and mouse.

• Keyboard Indicator:Number Lock,Capital Lock,Scroll Lock

Please note :Moving the keyboard or mouse will not wake up the keyboard and mouse.The Scroll Lock indicator will flash when the keyboard battery is low. The indicator beneath the scroll wheel will flash when the mouse battery is low

Mouse Specification

1. Left Button
2. Right Button
3. Scroll Wheel
4. DPI Button
5. On/Off

Mouse DPI
Click the DPI button to switch the DPI,the LED beneath the scroll wheel will flash once,twice and three times to show this 3 levels DPI.

SPECIFICATIONS

• Compatibility:Windows® XP or later,Mac OS X 10.7 or later
• Mouse Resolution:1200-1600-2400 DPI
• Wireless Range:8 meters
• Power Source:
  • Keyboard:1 x AAA battery(included)
  • Mouse:1 x AA battery(included)
• Dimensions:
  • Keyboard: 44.0013.302.20 CM
  • Mouse:11.106.163.73 CM

Contents

• 1 x Wireless Keyboard
• 1 x Wireless Mouse
• 1 x USB Receiver
• 1 x AAA battery
• 1 x AA battery
• 1 x User Manual

Battery warning

• Do not allow children to install batteries.
• When installing alkaline batteries,be sure to line up the “+”sign on the battery with the “+”sign on the product’s battery compartment.Improper installation can cause a battery to leak or overheat and may lead to serious injury.
• Do not use different types of batteries together.
• Do not mix old and new batteries.
• Do not mix alkaline,standard(Carbon-Zinc),or rechargeable(Nickel Cadmium)batteries.
• Avoid throwing batteries out in household garbage.Drop off batteries at local retailer or local government recycling facility.
• Never toss batteries into a fire.They may explode.

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

IC Statement
This device contains licenceexempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence exempt RSS(s).Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation of the device

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>