nedis Bluetooth speaker User Manual

Table of Contents

SPBT37101xx
Bluetooth speaker nedis Bluetooth speaker

1. On/off button|

---|---
2. Play/pause button
Hands-free button
Bluetooth button|

Press the button to play or pause the track.
Press the button to answer or end the call. Press and hold the button to reject the call.
Press and hold the button to start Bluetooth pairing or disconnect Bluetooth.

3. Volume + button
Next button|

4. Volume – button
Previous button|

5. USB port|

To charge the device, connect the USB cable to the USB port of the device and to a USB adapter or computer. The red charging indicator comes on. The device starts charging.
When the charging process is completed, the red charging indicator goes off.

6. AUX input|

Connect an AUX cable to the AUX input of the device and the audio device. The red indicator comes on.

General safety

Read the manual carefully before use. Keep the manual for future reference.
The manufacturer is not liable for consequential damages or for damages to property or persons caused by nonobservance of the safety instructions and improper use of the device.
Only use the device for its intended purposes. Do not use the device for other purposes than described in the manual.
Do not use the device if any part is damaged or defective. If the device is damaged or defective, replace the device immediately.
The device is suitable for indoor use only. Do not use the device outdoors.
The device is suitable for domestic use only. Do not use the device for commercial purposes.
Do not use the device in locations with high humidity, such as bathrooms and swimming pools.
Do not use the device near bathtubs, showers, basins or other vessels containing water.
Do not use a timer or a separate remote-control system that switches on the device automatically.
Do not cover the device.
Place the device on a stable, flat surface.
Keep the device away from flammable objects.

Electrical safety

nedis Bluetooth speaker -Electrical safet

To reduce risk of electric shock, this product should only be opened by an authorized technician when service is required.
Disconnect the product from the mains and other equipment if a problem should occur.
Do not use the device if the mains cable or mains plug is damaged or defective. If the mains cable or mains plug is damaged or defective, it must be replaced by the manufacturer or an authorized repair agent.
Before use, always check that the mains voltage is the same as the voltage on the rating plate of the device.
Do not move the device by pulling the mains cable. Make sure that the mains cable cannot become entangled.
Do not immerse the device, the mains cable or the mains plug in water or other liquids.
Do not leave the device unattended while the mains plug is connected to the mains supply.
Do not use an extension cable.

Warning!

Before cleaning or maintenance, always switch off the device, remove the mains plug from the wall socket and wait until the device has cooled down.
Do not use cleaning solvents or abrasives.
Do not clean the inside of the device.
Do not attempt to repair the device. If the device does not operate correctly, replace it with a new device.
Do not immerse the device in water or other liquids.
Clean the outside of the device using a soft, damp cloth. Thoroughly dry the device with a clean, dry cloth.
Clean the ventilation openings using a soft brush.

Support
If you need further help or have comments or suggestions please visit www.nedis.com/support