Feelstorm VB607-M Digital Video Baby Monitor User Manual

: June 6, 2024
: Feelstorm

User Manual V1.0
VB607 VIDEO BABY MONITOR

SAFETY INSTRUCTIONS

WELCOME…
To your new digital Baby Monitor!
Thank you for purchasing the product. Now you can see and hear your baby sleeping in the other room or you can monitor your older children in their playroom. This User’s Guide provides you with all the information you need to get the most from your product.
Before you can use the baby monitor, we recommend you insert and fully charge the battery in the parent unit, so that it continues to work if you disconnect it from the mains power to carry it to another location. Please read the Safety Instructions on page 5 before you install the units.
Got everything?
1 x Parent Unit
1 x Baby Unit
2 x Power adapter

OVERVIEW OF YOUR PARENT UNIT

1. Microphone
2. Power Key/ Return Key
3. OK/ Menu Key
4. LCD Display
5. Power/Charging Indicating LED
6. Signal Indicating LED| 7. Up/ Volume +
8. Speaker
9. Power Adapter Connector
10. Music Play ON/OFF Key
11. Down/ Volume –
12. PTT Key
---|---

OVERVIEW OF YOUR BABY UNIT

1. Microphone
2. Power Key/ Return Key
3. OK/ Menu Key
4. LCD Display
5. Power/Charging Indicating LED
6. Signal Indicating LED| 6. Night Light Key
7. Power Adapter Connector
8. Speaker
9. Pair Key
10. Temperature Sensor
---|---

SAFETY INSTRUCTIONS

WARNING:
This baby monitor is compliant with all relevant standards regarding electromagnetic fields and is, when handled as described in the User’s Guide, safe to use.
Therefore, always read the instructions in this User’s Guide carefully before using the device.

Adult assembly is required. Keep small parts away from children when assembling.
This product is not a toy. Do not allow children to play with it.
This baby monitor is not a substitute for responsible adult supervision.
Do not place the baby unit or cables in the cot or within arm’s reach of the baby (at least 1 meter away).
Keep the cords out of reach of children.
Do not use the baby monitor near water or a heat source.
Only use the power adapters provided.
Do not touch the plug contacts with sharp or metal objects.

GETTING STARTED

BABY UNIT POWER SUPPLY

Connect the small plug of the power adapter to the baby unit and the other end to the main socket.
NOTE: Only use the power adapter provided
A White light led will display indicate the baby unit is working.

PARENT UNIT POWER SUPPLY

Charging the parent unit fully before use is recommended.
This will allow the unit to operate on battery in the event of a power failure.

Connect the plug of the power adapter to the parent unit and the other end to the mains socket
The charging LED will illuminates means start charging the battery
NOTE: Only use the power adapter provided
Press the power key to turn on the parent unit.

USING THE BABY MONITOR

SETTING UP

Place the baby unit in a convenient location (e.g. on a table) and point the camera lens towards the area you want to monitor.
Adjust the baby unit until you are satisfied with the image in the parent unit.

NOTE:
DO NOT place the baby unit within the baby’s reach!
If there is interference on the picture or sound, try moving the unit to different locations, and ensure they are not close to other electrical equipment.
This product cannot be carried around when used, it must be used in a fixed position.

PAIRING CAMERA

The enclosed baby unit has already been registered,You do not need to register it again unless the baby unit loses its link with the parent unit. See section “5.2 Camera Registration” for more details.

VOX FUNCTION

Enter VOX menu, choose VOX mode. The VOX mode automatically puts the display in sleep mode to save the battery. It reactivates automatically when it detects noise in the baby’s room.

MUSIC PLAYER

Press music key will turn on the music player and play lullaby through the baby unit; press music key again will turn off it.

TALK FUNCTION

Press and hold PTT key on the parent unit to talk to your baby through the baby unit loudspeaker.
The symbol will be displayed at the bottom of the screen.

ADJUSTING THE VOLUME

When the video is playing mode, press Volume-key to decrease volume or Volume

key to increase volume.The display will show the current volume for 5 seconds.

NIGHT LIGHT FUNCTION

Press the night light key on the baby unit once to enter level one, press two times to enter level 2, press three times to turn off the night light.

MONITORING SCREEN ICONS

1. Signal strength indicator
2. Temperature of the baby’s room
3. Lullaby is playing
4. Vox function activated| 5. Alarm activated
6. Battery indicator
7. PTT function activated
8. Date and time ( HH:MM AM/PM DD/MM )
---|---

Press “OK/Menu” Key at monitoring screen will enter the main menu, it contains 6 items:

1. Camera
2. Alarm
3. VOX| 4. Settings
5. Languages
6. System info
---|---

You can press the “up” Key or “down” Key to move the cursor to select an item and press the “Menu” key will enter the sub-menu which you selected. Press the “Power” key will be back to the monitoring screen.

CAMERA REGISTRATION

Press the “OK/Menu” key to enter registering screen, then push the “pair” key on the back of the baby unit within 10 seconds.

ALARM

Press “PTT” key to move the cursor and “up/down” key to change the value.

SETTINGS

5.4.1 Time and date
There are contains 2 items in this menu Set time/date Set format

Press the “PTT”key to move the cursor and the “Up/Down” key to change value.
5.4.2 Temperature unit
Switch the unit to Celsius or Fahrenheit

5.4.3 Anti-flicker
You are able to adjust the frequency of 50 / 60 HZ to suit your lighting for anti-flicker.

5.4.4 LCD backlight
You are able to adjust the brightness of the LCD you are viewing and the LCD backlight active time in menu operation.

VOX

System mode
This menu allows you to choose the working mode from the following: Normal mode / VOX mode

VOX Sensitivity
Switch the Vox sensitivity at Low / Medium / High level

LANGUAGE

The language setting menu allows you to choose your language from the following

SYSTEM INFO

There are contains system information such as Project id, Hardware version, software version, build date, etc.

TECHNICAL FEATURES

Frequency: 2.4GHz digital
Modulation mode: GFSK
Operating temperature: -10 to +45°C
Operating Humidity: <85%
Range: 260m in open field
Monitor
LCD: 3.2-inch TFT LCD
Resolution: 320 x 240
Battery: Li-polymer 1150mAh
Dimensions(W x H x D): 94 x 120 x 20mm
Camera
Sensor: 0.3Mega pix CMOS
Minimum illumination: 0Lux (IR on)
Night vision distance: 15ft (5m)
Lighting sensor
Temperature sensor
Dimensions (W x H x D) : 74 x 125 x 74mm

Made in China

FCC Warning This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.