GRANDSTREAM GWN7624 In Wall WiFi Access Point Installation Guide
- June 4, 2024
- GRANDSTREAM
Table of Contents
GRANDSTREAM GWN7624 In Wall WiFi Access Point
OVERVIEW
The GWN7624 is an in-wall Wi-Fi access point designed for small-to-medium
sized businesses, offices, residential, commercial locations, hotels and more.
It provides three Gigabit network ports to provide IP phones, IPTV, computers
and similar devices with Ethernet while also providing and uplink Gigabit
network port with PoE/PoE+. The GWN7624 offers 2.4G 2×2:2, 5G 4×4:4 MU-MIMO
technology and a sophisticated antenna design for maximum network throughput
and expanded Wi-Fi coverage range. To ensure easy installation and management,
the GWN7624 uses a controller-less distributed network management design in
which the controller is embedded within the product’s web user interface.
The GWN7624 is also supported by GWN.Cloud and GWN Manager, Grandstream’s free
cloud and on-premise Wi-Fi management platform. It is the ideal Wi-Fi AP for
voice-over-Wi-Fi deployments and offers a seamless connection with
Grandstream’s Wi-Fi capable IP phones. With support for advanced QoS, low-
latency real-time applications, mesh networks, captive portals and 200
concurrent clients per AP, the GWN7624 is an ideal Wi-Fi access point for
medium wireless network deployments with medium user density.
PRECAUTIONS
- Do not attempt to open, disassemble, or modify the device.
- Do not expose this device to temperature outside range of -10 °C to 50 °C for operation and -30 °C to 60 °C for storage.
- Do not expose the GWN7624 to environments outside of the following humidity range: 5-95% RH (non-condensing).
- Do not power cycle your GWN7624 during system boot up or firmware upgrade. You may corrupt firmware images and cause the unit to malfunction.
PAKEAGE CONTENTS
GWN7624 PORTS
| Port | Description |
|---|---|
| PoE IN | Ethernet RJ45 port (10/100/1000Mbps) supporting PoE/PoE+. |
| LAN 1 | 1x 10/100/1000Mbps Ethernet port. |
LAN 2
LAN 3| 2x 10/100/1000Mbps Ethernet ports with PSE.
Note: The maximum output of each PSE port is 6W.
RESET| Factory reset pinhole.
Press for 7 seconds to reset factory default settings.
POWERING AND CONNECTING THE GWN7624
GWN7624 can only be powered on using PoE/PoE+ switch using following steps.
Step 1: Plug a RJ45 Ethernet cable into the PoE IN network port of
GWN7624.
Step 2: Plug the other end into the uplink port of the power over
Ethernet (PoE/PoE+) switch.
HARDWARE INSTALLATION
GWN7624 can be mounted on the wall. Please refer to the following steps for the appropriate installation.
Wall Mount
- Use a measuring tape to measure the distance between the four wall mount slots on the back of the GWN7624 access point and use a pencil to mark the mounting screw holes on the wall.
- Drill the holes in the spots that you have marked, then attach the GWN7624 access point to the wall via the wall mount slots.
CONNECT TO GWN7624 DEFAULT Wi-Fi NETWORK
GWN7624 can be used as standalone access point out of box, or after factory
reset with Wi-Fi enabled by default.
After powering the GWN7624 and connecting it to the network, GWN7624 will
broadcast a default SSID based on its MAC address GWN[MAC’s last 6 digits] and
a random password.
Note: GWN7624’s default SSID and password information are printed on the
sticker of the unit.
ACCESSING THE CONFIGURATION INTERFACE
A computer connected to the GWN7624’s SSID, or to the same network as the GWN7624 can discover and access its configuration interface using one of the below methods:
Method 1: Discover GWN7624 using its MAC Address
- Locate the MAC address on the MAC tag of the unit, which is on the device, or on the package.
- Form a computer connected to same network as the GWN7624, type in following address using GWN7624’s MAC address on your browser: https://gwn_
.local
Example: If a GWN7624 has the MAC address 00:0B:82:8C:4D:F8, this unit can be accessed by typing https://gwn_000b828c4df8.local on the browser.
Method 2: Discover GWN7624 using GWN Discovery Tool
- Download and install GWN Discovery Tool from the following link: http://www.grandstream.com/tools/GWNDiscoveryTool.zip
- Open the GWN Discovery Tool, and click on Scan.
- The tool will discover all GWN76XX Access Points connected on the network showing their MAC and IP addresses.
- Click on Manage Device to be redirected to the GWN7624’s configuration interface, or type in manually the displayed IP address on your browser.
- Enter username and password to login. (The default administrator username is “admin” and the default random password can be found at the sticker on the GWN7624).
Notes:
- Make sure that the GWN7624 is not already paired with another GWN76xx Access Point as slave, GWN7000 Router Series, GWN. Cloud or GWN Manager, otherwise the configuration interface cannot be accessed.
- If the GWN7624 is already paired, make sure to unpair it first, or do a factory reset.
- It is customer’s responsibility to ensure compliance with local regulations for frequency bands, transmit power and others.
- To manage GWN7624 over cloud, please refer to https://www.gwn.cloud.
The GNU GPL license terms are incorporated into the device firmware and can be
accessed via the Web user interface of the device at my_device_ip/gpl_license.
It can also be accessed here: http://www.grandstream.com/legal/open-source-
software
To obtain a CD with GPL source code information please submit a written
request to [email protected]
For certification information, please refer to User Manuals: http://www.grandstream.com
Common part：
This equipment complies with radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter.This equipment should be
installed and operated with minimum distance 20cm between the radiator& your
body.
U.S. FCC Part 15 Regulatory Information
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:(1) this device may not cause harmful
interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
Canada Regulatory Information
Radio equipment
Operation of 5150-5250 MHz is restricted to indoor use only.
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development
Canada’s licence-exempt RSS(s). Operation is subject to the following two
conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may
cause undesired operation of the device
EU Regulatory Information
In all EU member states, operation of 5150-5350 MHz is restricted to indoor
use only.
Support Frequency Bands and Power:
WLAN 2.4 GHz < 20 dBm;
WLAN 5.2 GHz < 23 dBm;
WLAN 5.3/ 5.6 GHz < 27 dBm;
The simplified EU declaration of conformity referred to in Article 10(9) shall
be provided as follows:
Hereby, [Grandstream Networks, Inc.] declares that the radio equipment type
[GWN7624] is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the
following internet address: www.grandstream.com
UK Regulatory Information
Operation of 5150-5350 MHz is restricted to indoor use only.
Support Frequency Bands and Power:
WLAN 2.4 GHz < 20 dBm;
WLAN 5.2 GHz < 23 dBm;
WLAN 5.3 GHz < 20 dBm;
WLAN 5.6 GHz < 27 dBm;
The simplified declaration of conformity referred to in Regulation 8 & 14
shall be provided as follows:
Hereby, [Grandstream Networks, Inc.] declares that the radio equipment type
[GWN7624] is in compliance with Directive RER2017 (S.I. 2017/1206).
The full text of the EU declaration of conformity is available at the
following internet address: www.grandstream.com
For Certification, Warranty and RMA information, please visitwww.grandstream.com
Grandstream Networks, Inc.
126 Brookline Ave, 3rd Floor Boston, MA 02215. USA
Tel : +1 (617) 566 – 9300
Fax: +1 (617) 249 – 1987
www.grandstream.com
Documents / Resources
|
GRANDSTREAM GWN7624 In Wall WiFi Access
Point
[pdf] Installation Guide
GWN7624, YZZGWN7624, GWN7624, In Wall WiFi Access Point, GWN7624 In Wall WiFi
Access Point
---|---