Panasonic F-M15EC 5 Blade Ceiling Fan Instruction Manual

Operating and
Installation Instructions
Ceiling Fan

Model No

F-M15EC
F-M15GC| F-M12EC
F-M12GC
---|---

Net Weight : 7.0 kg
Net Weight: 7.3 kg

Operating and Installation Instructions
Ceiling Fan
Thank you for purchasing this Panasonic product.
Before operating this product, please read the instructions carefully, and save this manual for future use.

Always follow these instructions

Safety precautions

To avoid the possibility of causing injury to users or damage to properties, please follow all the explanations written below.

| This symbol denotes an action that is COMPULSORY.
---|---
| This symbol denotes an action that is PROHIBITED.
WARNING| A state that may be caused by the mishandling of products, which, if not avoided,
may lead to the possibility of death or serious injury of users.
CAUTION| A state that may be caused by the mishandling of products, which, if not avoided,
may result in the injury of users or property damage.
| Follow strictly all the instructions given in this manual for installation.
Electrical or installation work needs to be performed by a qualifi ed individual. Installation errors can cause fi re, electrical shock, injury, and Ceiling Fan to drop.
---|---
| Switch off the power supply and wait until the
Blades are fully static, before cleaning or doing any maintenance jobs.
Can cause injury and electrical shock if the Ceiling Fan move suddenly.
Kindly refer to your authorized dealer for repairing or maintenance issues.
| Tighten the Blade Screws fi only using a screwdriver.
(250-300 N•cm)
Can cause injury if Blade drops.
| Ensure that the Ceiling Hook can sustain more than 10 times the Ceiling Fan weight. Can cause injury if Ceiling Fan drops.
| Stop using the Ceiling Fan when any abnormality or failure occurs and turn “OFF” the Miniature Circuit Breaker (MCB).
Risk of smoke, fi re, electrical shock, and drop.
Please contact your authorized dealer for maintenance/ repair.
| Dismantle the broken or damaged Ceiling Fan.
Can cause injury if Ceiling Fan drops.
| If unusual oscillating movement is observed, immediately stop using the Ceiling Fan and contact the manufacturer, its service agent or suitably qualifi ed persons.
Can cause injury if Ceiling Fan drops.
| Do not install the Ceiling Fan in oily and dusty places.
Can cause fi re, explosion, short circuit, and electric shock.
| Do not install the Ceiling Fan near fl flammable areas such as a gas cooker.
Can cause fi re, explosion, short circuit, and electric shock.
| Do not install the Ceiling Fan near chemicals and alkaline.
Can cause fi re, explosion, short circuit, and electrical shock.
| Do not damage the wire during installation e.g.
deform due to heat, twist, bend, etc.
Can cause fi re, explosion, short circuit, and electric shock.
| Do not use a power supply other than the rated voltage
mentioned. Overheating can cause electrical shock and fi re.
| Do not insert any metal items in the battery area
with the Battery. Can cause fi re, explosion, short circuit, and electric
shock.
| Do not hang onto the Ceiling Fan.
Can cause injury if Ceiling Fan drops.
| Do not disassemble the Ceiling Fan unless stated
by this manual. Must use only supplied parts.
Can cause fi re, electrical shock, injury, and Ceiling Fan to drop.
| Do not touch the Ceiling Fan while it is operating.
Can cause injury, damage, and Ceiling Fan to drop.
| Do not sprinkle water to the Ceiling Fan or do not wet the Ceiling Fan.
Can cause fi re, explosion, short circuit, and electric shock.

CAUTION

| To avoid the possibility of causing injury to users or damage to properties, please follow all the explanations written in this manual.
The manufacturer will not be responsible for any accidents or injuries caused by defective, defi client installation or installation which does not follow the instruction manual.
Can cause the injury of users or property damage.
---|---
| This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience
and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
Can cause the injury of users or property damage.
| The Ceiling Fan must be mounted above 2.5 m from the fl door and 1 m from the wall to the Blade.
Can cause unstable air fl ow and affect Ceiling Fan to wobble.
Can cause injury if Ceiling Fan drops.
Refer to page 20 (step 2 – 1 ) for the measurement method.
| After installation makes sure the Ceiling Fan does not wobble extremely.
Can cause injury if Ceiling Fan drops.
| Replace all the Blades if any of them breaks or cracks.
Wobbling can cause Ceiling Fan to drop.
| The mounting of the suspension system shall be performed by the manufacturer, its service agent, or suitably qualifi ed persons.
Can cause injury if Ceiling Fan drops.
| The Ceiling Fan suspension system should be examined at least once every two years.
Can cause the injury of users or property damage.
| The replacement of parts of the safety suspension system device shall be performed by the manufacturer, its service agent, or suitably qualifi ed
persons.
Can cause the injury of users or property damage.
| This product is for in-house use only. Do not install at a windy place.
Can cause injury if Ceiling Fan drops.
| Do not install at places where there is high vibration and impact.
Can cause injury if Ceiling Fan drops.
| Avoid fi xing inside the dome ceiling.
Can cause unstable air fl ow and affect Ceiling Fan to wobble.
Can cause injury if Ceiling Fan drops.
| Wipe away dirt with a clean soft cloth, ordinary soap, and water to keep the Ceiling Fan clean.
Do not use solvents (gasoline and petroleum) or any other chemicals.
Can cause plastic part deformation and metal corrosion.
Can cause injury if parts drop.
| Do not install the Ceiling Fan in a wet, high temperature and high humidity area such as the shower room. If an electrical current leakage occurs, it can cause electrical shock and fi re easily.

Maintenance

1. Check the Ceiling Fan condition annually. If a problem occurs, stop using the Ceiling Fan. Then refer to the authorized dealer.
   Checkpoint:
   Loosened screws, safety wire condition, motor shaft damage, etc.

2. Ensure the Safety Switch is in good condition.
   If a problem occurs, stop using the Ceiling Fan. Then refer to the authorized dealer.

3. Keep the Ceiling Fan clean. Wipe away dirt with a clean soft cloth, ordinary soap, and water. Wipe it again to dry it. Do not use solvents (gasoline, petroleum, thinner, benzene, alcohol, cleaning powder, alkaline detergent) or any other chemicals.
   • Do not bend the Blade while cleaning.

4. Do not paint the Blades. If damaged, order a new set of Blades (3 pieces / 5 pieces) from
   an authorized dealer.

5. When referring to an authorized dealer, show these instructions to them and maintain them correctly.

6. If the product is broken or damaged, remove it from the ceiling and replace it with new. This is to avoid the Ceiling Fan drops.

7. The Ceiling Fan suspension system should be examined at least once every two years.

8. Do not modify or repair the LED light. If a problem occurs, refer to the authorized dealer (for F-M15GC / F-M12GC).

Name of parts

Attention:

• Do not place the Ceiling Fan directly on the fl poor. Can cause scratches to the product.
• Do not use in an area near hot springs and volcanoes.
Can cause the lighting not lit. (for F-M15GC / F-M12GC)

Note:
• The illustrations in this manual are for explanation purposes only and may differ from the actual product.

WARNING

| Do not use modifi ed parts other than originally supplied
parts. Can cause injury if the Ceiling Fan drops.
| Do not disassemble or remove the pipe from Motor Unit.
Can cause fi re, electrical shock, injury, and Ceiling Fan to drop.

■ Install to ceiling

1. Remove the supplied Bolt a, Nut b, Cotter Pin c, and Pulley d.

2. Ensure that the Ceiling Hook (“J” hook a ) or (“U” hook b ) is not loosened.
   For reference, the Ceiling Hook (“J” hook a ) or (“U” hook b ) can sustain 20 N.

3. Place Pulley d onto the Ceiling Hook (“J” hook a ) or (“U” hook b ).

4. Tighten the Pulley Set Plate e fi only with the Bolt a and Nut b provided. For reference, tightening torque is 1500-1800 N•cm.
   • Cotter Pinc must fi x into Bolt a and bent.

■ Note:

• “J” hook a and “U” hook b installation method is the same.

5 Remove the Safety Wire Screw f from the Pipe.
6 Arrange and tie the Safety Wire g as shown.
• Firmly screw the Safety Wire g with Safety Wire Screw f onto the Pipe.

WARNING
Ensure that the Ceiling Hook can sustain more than 10 times the Ceiling Fan weight. Safety Wire must be fi xed correctly to the ipe. Can cause injury if the Ceiling Fan drops.

Checkpoint after installation

• Make sure Bolt and Nut are fi only tightened and Cotter Pin is inserted and bent for safety reasons.
• Make sure the Ceiling Fan is securely fixed on Ceiling Hook and Ceiling Fan not slanting after installation.
• The Safety Wire is looped to the Ceiling Hook and securely fixed to the Pipe.

■ Wiring instruction
F-M15EC / F-M15GC Connect the wires to the house’s supply line.

• Please use Splice when the house supply wire or earth wire inserted in the terminal are stripped wire.
• If using a closed-end connector, please cut the Splice and strip the wire.
• Splice and connectors are not included.

| Brown (Live)
---|---
| Blue (Neutral)
| Green•Yellow (Earth)

Connect the house’s supply wire c to the Terminal h according to the diagram shown.
• Recommended wire stripping length is 7 ~ 8 mm.

| Brown (Live)
---|---
| Blue (Neutral)
| Green•Yellow (Earth)

Connect to the power supply according to the wiring diagram below.
F-M15GC

Wiring diagram

Wiring diagram

Connecting to the power supply

■ Attention:

1. It is recommended to the user install an OFF/ON switch on the wall for the Ceiling Fan, replacing the existing regulator or new regulator point.
2. This product should be installed with a double poles single throw switch (breaker switch) with a minimum of 3 mm contact gap in the fixed installation circuit.
3. Do not use a regulator or dimmer switch for this model. (It can damage the Ceiling Fan)
4. Should there be a regulator or dimmer switch, disconnect it and reconnect the wiring as above.

WARNING
Electrical wiring must be done by a qualifi ed individual. Can cause fi re or electrical shock.
This product is not provided with a cord and plug or with other means for connection to the supply.
When connecting or changing the power cord or lead wire, it must be performed by a qualifi ed person in order to avoid a hazard.
Please use 227IEC53(RVV) or thickness of tube 1 mm or above. (If there are other requirements such as the diameter of lead wire, please use according to the regulation of the country).
Can cause fi re or electrical shock.

Do not bypass and short circuit the Safety Switch.
Can cause fi re, electrical shock, injury, or Ceiling Fan to drop.

√ Checkpoint after installation
• The wiring is connected properly to the power supply.

1. Remove the Protection Film n from the LED Cover v (for F-M15GC / F-M12GC).
   

2. Assemble the Blade Assembly D towards the Motor Unit C .

3. Tighten the Blade Assembly D firmly with the Blade Screws H provided. Use 2 screws for one Blade
   Assembly. For reference, tightening torque is 250-300 N•cm.
   Ensure the Blade Assembly D screw hole is centered with the Motor
   Unit C screw hole. Hold the Blade
   Assembly during installation.

WARNING
Tighten the Blade Screws firmly using a screwdriver. (250-300 N•cm) Can cause injury if the Blade drops.

CAUTION
The Blade must be fixed correctly. Can cause no air fl ow. Can cause injury if the Blade drops.

√ Check point after installation
• The Blade Screws (6 pieces / 10 pieces) fi xing the Blades are securely tightened.

■ Installing the Lower Canopy

1. For F-M12EC and F-M12GC, detach the Lower Canopy B from all hook w.
   For F-M15EC and F-M15GC, remove the Screw (2 pieces) j from Lower Canopy B.

2. Align the Upper Holder k2 of the Motor Unit C between the two Fixing Rib k1 of the Lower Canopy B (2 pieces) .

3. Make sure two Fixing Rib k1 sit between Upper Holder k2 of the Lower Canopy B . Clip it until a “click” sound is heard.
   For F-M15EC and F-M15GC, secure the Lower Canopy B using Screw j and tighten them.

How to install

Checkpoint after installation
The Lower Canopy is securely screwed (F-M15EC / F-M15GC).

Installing the Upper

Canopy

1. Remove the Screw (2 pieces) I from Upper Canopy A.
   For F-M15EC and F-M15GC, align and insert the Fixing Rib l1 of
   Upper Canopy A into the Slot l2 of Canopy Holder u of the Pipe d.
   For F-M12EC and F-M12GC, align and insert the Fixing Rib m1 of
   Upper Canopy A into the Slot m2 of Lower Canopy B.

2. Check the gap between the
   Upper Canopy A and ceiling is approximately 5 mm or more.
   The gap can be adjusted by fi xing the Upper Canopy A into different
   Slot l2 of Canopy Holder u of the
   Pipe d (for F-M15EC and F-M15GC) or Lower Canopy B (for F-M12EC and F-M12GC).
   Ensure Upper Canopy A (2 pieces) is sat on top of Lower Canopy B.
   Clip it until it is fully fi bed. Then,
   secure the Upper Canopy A using Screw i and tighten them.
   For F-M15EC and F-M15GC, make sure a “click” sound is heard before screwing the Upper Canopy A.

Attention:

• Do not assemble the Fixing Rib l1 (for
  F-M15EC and F-M15GC) or Fixing Rib m1 (for F-M12EC and F-M12GC) of
  Upper Canopy A in opposite direction.

• Can cause abnormal noise.

Checkpoint after installation
The Upper Canopy is securely screwed.

Install Remote Control Holder

Install the Remote Control Holder F2 to the wall. Fix the Remote Control Holder F2 using provided Screw o  (2 pieces) and Wall Plugs p (2 pieces) as shown in figure below.

• Distance between holes q is 42 mm.
• Depth for Wall Plug r is 30 mm.
• Hole diameter s is Ø 6 mm.

Attention:
• The Wall Plugs are not needed for the wooden wall.

How to use

■ Before use

1. Remove the Battery Covert of Remote Control F1.
2. Insert the Batteries E (2 pieces AAA / R03 / LR03). • “+” “-” position should match. 3 Close the Battery Covert.

Attention:

• Please remove all Batteries before disposing of the Remote Control. The life of the Battery is about one year for normal usage.
• Replace all Batteries at one time and be careful not to mix Battery type.

WARNING
Do not insert any metal items in the battery area with the battery. Can cause fi re or electrical shock due to short circuits.

■ Attention:

• If your Remote Control missing or misplaced, the Ceiling Fan will operate at the user’s last setting when switched on by the wall switch or it can be switched on through App.

• If the Ceiling Fan is found to wobble during operation,
  i.) Fix the Blades at different combinations of positions. Repeat this step until the Ceiling Fan stops wobbling.
  ii.) Make sure the Ceiling Fan is securely fixed on Ceiling Hook and Ceiling Fan not slanting after installation.
  iii.) Ensure Bolt and Nut are fully tightened.

• If the Ceiling Fan still wobbles after Step 3 – 3 (page 15), please refer to the authorized dealer.

■ Remote Control coverage

1. The figure above shows the best coverage area (W) around 8 m. The ideal ceiling height (H) is 3 to 4 m. The Remote Control must be pointed in the direction of the Ceiling Fan when in use.
2. Avoid the following situations:
   • Netting and Glasse can reduce the signal power or reflect the infrared signal from the Remote Control.
   • Lighting effect generated by Fluorescent Lighting Systems f directly onto the product receiver area can affect the signal transmission.
   • Obstacles such as Walls or Glass g  between the product receiver and Remote Control can cause signal transmission failure.

■ Attention:

• The power consumption when the operation is turned off and the Wi-Fi function is off by Remote Control is about 0.5 W.
• It is recommended to switch off the wall switch or breaker if the Ceiling Fan is not in use for a long period. This is for zero power consumption purposes.
• Point the Remote Control directly to the desired Ceiling Fan. If 2 or more Ceiling
  The fan is controlled by the same Remote Control, there is a possibility that the other Ceiling Fan function/setting may be changed at the same time.

■ How to use Remote Control

1. OFF/ON Button Press to activate or stop the ceiling fan. “ON” – Short beeping sound. “OFF” – Long beeping sound.

2. ‘+’ SPEED Button Increase Fan Speed, maximum fan speed is 10.

3. ‘-’ SPEED Button
   Decrease Fan Speed, minimum fan speed is 1.

4. REVERSE Button Change the direction of fan rotation (clockwise, anticlockwise).

5. Wi-Fi Button Press to activate or off the Ceiling Fan wireless network. “ON” – Short beeping sound. “OFF” – Long beeping sound.

6. NIGHT LIGHT Button Press to select Night Light setting.

7. WARM COLOR Button Press to select Light color – Warm.

8. WHITE COLOR Button Press to select Light color – White.

9. ‘+’ LIGHT Button Increase light brightness gradually.

10.  ‘-’ LIGHT Button Decrease light brightness gradually.

11. LIGHT OFF/ON Button Turn off or turn on the Light. “ON” – Short beeping sound. “OFF” – Long beeping sound.

■ Fan Speed Control

Fan Speed can be adjusted by Remote Control. This fan is equipped with MEMORY FUNCTION to restore the user’s last setting whenever the fan is switched on.
Press and hold the “+” or “-” button to increase or decrease the speed gradually until reaching the desired condition.
Two long beep sound is heard when reaching the maximum or minimum limit of fan speed.

| Increase speed
---|---
| Decrease speed

■ Reverse

Press the “REVERSE” button, the fan will stop for a while then continue rotating in the opposite direction.

Reverse rotation

■ LED Brightness Control

Brightness of LED can be adjusted by Remote Control. This fan is equipped with MEMORY FUNCTION to restore the user’s last setting whenever the fan is switched on.
Press and hold the “+” or “-” Light button to increase or decrease the brightness gradually.
Two long beep sound is heard when reaching the maximum or minimum limit of LED brightness.

| Increase LED brightness
---|---
| Decrease LED brightness

■ Note:
• LED light brightness may differ according to each unit.
■ LED Color Temperature
The color temperature of the LED light can be changed and adjusted by Remote Control.
White Color
Press and hold the “WHITE” Color button to adjust the White color temperature gradually.
Warm Color
Press and hold the “WARM” Color button to adjust the Warm color temperature gradually. Two long beep sound is heard when
reach the limit of color temperature.

| Select “WHITE” Color, hold to adjust Color Temperature
---|---
| Select “WARM” Color, hold to adjust Color Temperature

■ Night Light Control
Press the “NIGHT LIGHT” button to change the light brightness to 3 different levels. 1st press for Low Light Control
2nd press for Medium Light Control
3rd press for High Light Control
4th press for Light OFF
5th press back to Low Light Control

■ Note:
• During this function, “WHITE”, “WARM” Color button, “+”, “-” Light button have no response (no function when Night
Light is used).

■ Additional Ceiling Fan feature (Operate through App only)

Download the App “Ceiling Fan” to use the below features.

1. Sleep mode
   The ceiling Fan Speed and timer will gradually reduce until the fan is off.

2. Grouping function
   Centralize control of up to 8 Ceiling Fans simultaneously.

3. Scheduling function (Functions include Fan and light operation) Set the Ceiling Fan to perform specifi c function at specifi c time.

4. ON/OFF Timer
   Users can switch ON or OFF the Ceiling Fan by setting timer count down

5. 1/f YURAGI function (natural breeze)
   Add a smooth accent of air capacity that produces more natural and comfortable wind. 1/f YURAGI function will be activated according to speed setting.

6. Scene setting
   (for F-M15GC / F-M12GC)
   Preset 4 light settings for user daily activities.

7. Reverse Function (can operate through Remote Control or App )
   Fan rotates in opposite direction to drive air upwards and circulate for even air distribution.

Specifi cations

Model Name

Blade Size

No. of Blade

Voltage (VAC)

Frequency (Hz)

Wattage (W) (Speed 1 / Speed 10)|

Fan only

Fan and Light

Air Delivery (m 3 /min)

Air Velocity (m/min)

Rotation (RPM) Speed 1 / Speed 10

■ Attention:
• Do not expose yourself continuously to direct wind from the Ceiling Fan. It can cause discomfort.

Panasonic Manufacturing Malaysia Berhad (196501000304)
No. 3, Jalan Sesiku 15/2, Section 15, Shah Alam Industrial Site,
40200 Shah Alam, Selangor Darul Ehsan

Printed in Malaysia

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>