Chargers WPC15-1TCNA Wireless Charging Pad User Manual
- June 4, 2024
- Chargers
Table of Contents
Wireless Charging Pad
WPC15-1TCNA
User Manual
DEAR CUSTOMER
Thank you for purchasing this product. For optimum performance and safety,
please read these instructions carefully before connecting, operating or using
this product. Please keep this manual for future reference.
INTRODUCTION
This product is a high-performance Wireless Charging Pad. This product is suitable for mobile phones and AirPods. Connect the wireless to a power charger, and then you can charge your device-supported wireless charging by putting it on the charger directly.
FEATURES
- Transmitting terminal input: 5V/9V/12V/1.5A
- Transmitting terminal output: 5W/7.5W/10W/15W
- Intelligent indicator to show working condition
- Compliant with QI, CE, and FCC standards
- It is light, smart, and convenient to use
SPECIFICATIONS
Input | 5V/9V/12V/1.5A |
---|---|
Output | 5W/7.5W/10W/15W |
Operation Temperature Range | 0-40°C |
Stor4ge Temperature Range | -20 — 70°C |
Operation Humidity | 10% ” 80% RH |
Storage Humidity | 5% — 95% RH |
Size | D102mm*H10.5MM |
Weight | 80g±3g |
PACKAGE CONTENTS
Before attempting to use this unit, please check the packaging and make sure the following items are contained in the shipping carton:
- Main unit×1
- User Manual×1
- Adapter×1
OPERATION
Operation Procedures
- Connect the charger to the power adapter.
- Place your device on the charger, and the light will flash one time, and then the blue light will be on during standby.
- Please take out the device after it is fully charged.
Note: green light for flashing when a malfunction occurs.
Operation Notes
- For optimum performance, please use a charger according to this user manual.
- Please connect the Wireless Charging Pad to a power adapter that outputs 12V/2.5A,
- Please unplug the charger after using it.
- Do not use the charger with an electronic product that is not in conformity with the specifications, so as to avoid any problem caused by specification mismatching.
- It’s normal that the charger will be a little overheated in the use process.
- When the charger stops working under some accidents, you need to check whether the device is compatible with this charger.
- Do not let the Wireless Charging Pad close to fire, such as stove, candles and etc.
- Do not let the Wireless Charging Pad soak into liquid, such as swimming pool, bathtub, etc.
- Do not wash the Wireless Charging Pad with corrosive cleaner.
- If the wireless charger cannot work properly, please contact the store or distributor in your area.
FCC Warning
This device complies with Part 18 of the FCC Rules.
Refer to FCC Part 18.213(c) and KDB 784748 Anner A section A.5:
Max. Electric Field Emissions: 3.3455V/m
Max. Magnetic Field Emissions: 0.8003 A/m
(b) The maintenance of the system is the responsibility of the manufacturer.
(c) To prevent interference, the product should be as far away from devices
operating at the same frequency as possible.
RF exposure considerations
This equipment complies with the FCC RF radiation exposure limits set forth
for an uncontrolled environment. This equipment should be installed and
operated with a minimum distance of 20cm between the radiator and any part of
your body.
This equipment meets the exemption from the routine evaluation limits in
section 2.5 of RSS-102. It should be installed and operated with a minimum
distance of 20cm between the radiator and any part of your body.
Caution:
Use the Product in an environment with a temperature Between 0℃ and 50℃;
Otherwise, it may damage your product. Products can only be used below 2000m
altitude For the following equipment:
Product Name: Wireless Charging Pad
Brand Name: CE-LINK, amazon basics
Model No.: WPC15-1TCNA
Dongguan CE LINK LIMITED
E-mail: changhong.chen@ce-link.com
hereby declares that this [Name: Wireless Charging Pad, Model: WPC15-1TCNA] is
in compliance with Radio Equipment Regulations 2017 (SI 2017 No. 1206, as
amended by SI 2019 No. 696).
The adapter shall be installed near the equipment and shall be easily
accessible.
This product is intended for sale and application in a business environment.
The RF distance between the body and the product is 20cm
Frequency Range: 105-205kHz (UK)
RF Output Power: 36.82dBuA/m(@3m) (UK)
IC WARNING
This device contains license-exempt transmitter(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>