dji CHX169-80 AVATA Battery Charging Hub User Guide

dji CHX169-80 AVATA Battery Charging Hub

INSTRUCTION

1. Battery Ports
2. Status LED
3. Power Port (USB-C)

CHARGING

Disclaimer
Carefully read this entire document and all safety and
compliance guidelines provided before use.
Warnings

1. When using the charging hub to charge the Intelligent Flight Batteries, it is recommended to use the DJI 65W Portable Charger or a USB Power Delivery charger.
2. The charging hub is only compatible with the BWX169- 2420-14.76 Intelligent Flight Battery. DO NOT use the charging hub with other battery models.
3. Place the charging hub on a flat and sturdy surface when in use. Make sure the device is properly insulated to prevent fire hazards.
4. DO NOT cover the battery or charging hub when charging. Otherwise, heat dissipation will be affected.
5. DO NOT touch the metal terminals on the charging hub.
6. If there is any noticeable buildup on the metal terminals, clean with a dry cloth.

Usage
When used with a compatible charger, the DJI AVATATM Battery Charging Hub can charge up to four Intelligent Flight Batteries in sequence from a high to low power level.

1. As shown in the figure, insert the battery into the battery port on the charging hub and connect the charging hub  to a power outlet (100-240V, 50/60 Hz) using a compatible charger. The figure uses the DJI 65W Portable Charger as an example.
2. The charging hub will first charge the batteries in sequence from a high to low power level until all the batteries inserted have a power level of 94%. The batteries will then be fully charged in sequence. The LED indicator on the charging hub will display the status (see table below). The battery level LEDs will indicate the amount of charge in the battery.
3. The battery can be disconnected from the charging hub when charging is complete.

Status LED Descriptions

Specifications

Charging time was tested using the DJI 65W Portable Charger in a lab environment and should be taken as a reference only.

EU Compliance Statement: SZ DJI TECHNOLOGY CO., LTD. hereby declares that this device (CHX169-80) is in compliance with the essential requirements and other relevant provisions of Directive 2014/30/EU. A copy of the EU Declaration of Conformity is available online at www.dji.com/eurocompliance
EU contact address: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany
Compliance Statement: SZ DJI TECHNOLOGY CO., LTD. hereby declares that this device (CHX169-80) is in compliance with the essential requirements and other relevant provisions of Electromagnetic Compatibility Regulations 2016. A copy of the GB Declaration of Conformity is available online at www.dji.com/eurocompliance

Environmentally friendly disposal
Old electrical appliances must not be disposed of together with the residual waste, but have to be disposed of separately. The disposal at the communal collecting point via private persons is free. The owner of old appliances is responsible to bring the appliances to these collection points or to similar collection points. With this little personal effort, you contribute to recycling valuable raw materials and the treatment of toxic substances.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>