BNT-SSL-XBJK-300W Solar Lights Outdoor User Manual
- June 15, 2024
- BNT
Table of Contents
BNT-SSL-XBJK-300W Solar Lights Outdoor
Product Information
Specifications:
- Product: Solar Street Light
- Charging Method: Solar
- Charging Time: Varies based on weather conditions
- Battery Performance: Monthly exposure to sunlight recommended
- Motion Sensor: Yes
- Light Modes: Mode 1 (100% brightness), Mode 2 (100% brightness for 30 seconds, then 30% brightness), Mode 3 (50% brightness)
- Warranty Period: 2 years
Product Usage Instructions
Charging the Product:
- Before using the product, place it in a sunny place to charge for several hours.
- If the product is not used for a long time, place it in a sunny place to charge for a day.
- To maintain battery performance, it is recommended to place the product in a sunny place every month.
Installation Steps:
- Adjust the bracket arm to your desired angle.
- Insert the base and tighten the bolts and nuts.
- Align the support hole with the hole in the light.
- Tighten bolts and nuts to lock.
Turning On and Off:
The light can be turned on during the day and will not turn off automatically.
- To turn on the light, set the ON/OFF switch to ON.
- To turn off the light, set the ON/OFF switch to OFF.
Motion Sensor Modes:
- Mode 1: When a pedestrian triggers the motion sensor, the light’s brightness is 100%. The light will be automatically turned off at night when there is no movement.
- Mode 2: When a pedestrian triggers the motion sensor, the light’s brightness is 100%. After 30 seconds of no movement at night, it enters 30% brightness.
- Mode 3: The light automatically turns on at night with 50% brightness.
FAQ:
Q: How long is the warranty period?
A: The warranty period is 2 years. It starts from the date of purchase by
the original consumer purchaser. Please keep the sales receipt or other
reasonable documents as proof of purchase.
Q: How can I contact customer support?
A: You can contact us at
1-833-872-6581 or email us at support
@bnt-store.com. You can also scan the provided
QR code to register product problems.
Reading this user manual thoroughly, before using it, is a must for your safety and the safety of others
PLEASE READ THESE INSTRUCTIONS CAREFULLY
- Before using the product, please charge it in a sunny place for several hours.
- If when the product is not used for a long time, please place the product in a sunny place to charge for a day. In order to maintain the performance of the battery, it is best to place the product in a sunny place every month.
- The charging time and charging efficiency of the solar panel may be affected by the weather and installation location.Considering the conversion rate of solar energy, if the product is used when the weather is good, it will improve the charging efficiency and effectiveness.
CONTENTS OF THE PACKAGE
Tips : The contents of the package will be one set. If you purchased a 2pack, the products you receive will be two sets of contents. If you purchased a 4pack, you will receive a 4-pack of lights contents.
PRODUCT DETAILS
INSTALLATION STEPS
- Adjust the bracket arm to your desired angle, insert the base, and tighten the bolts and nuts
- Align the support hole with the hole in the light, then tighten bolts and nuts to lock
PRODUCT DETAILS
WARRANTY
The warranty period is 2 years. ln each case, the warranty period is measured starting on the date of purchase by the original consumer purchaser. The sales receipt from the first consumer purchase, or other reasonable documents, is required in order to establish the starting date of the warranty period.
CONTACT US
Have an issue? Don’t worry, contact us, we will do our best to help you
Please scan the QR code to register product problems
1-833-872-6581
[email protected]