kogan NBMOPSPN25A 360 Snip Mop with Clean Bucket System User Guide
- June 7, 2024
- Kogan
Table of Contents
kogan NBMOPSPN25A 360 Snip Mop with Clean Bucket System User Guide
SAFETY AND WARNING
Please remove all packaging and stickers before first use.
Check that all components are included in the package. If any components are missing, please contact help.kogan.com for support.
To prevent scraping or scuffing, do not use steel wool or any other metal abrasives to wash the outer bucket.
To prevent damage, do not place the mop in or near direct heat. Adult supervision is recommended when children are using the mop.
Do not attempt to repair the mop yourself.
Component
- Mop plate
- Connection fork
- Pole assembly – lower
- Pole assembly – middle
- Pole assembly – upper
- Mop head
- Inner bucket
- Outer bucket
ASSEMBLY
Step 1:
Connect the pole assemblies, attaching the Upper (5) and Middle (4) pieces together, then attaching the Lower (3) and Middle (4) pieces. The connected pole assembly will form the mop’s handle.
Step 2:
Connect the handle’s lower pole to the connection fork (2) on the mop plate (1). The whole structure can then be connected onto the mop head to complete the assembly of the mop. Next, attach the mop head (6) to the mop plate (1), completing the mop assembly.
OPERATION
Step 1:
After assembling the mop, lift off the inner bucket (7) and add sufficient water into the outer bucket (8). Ensure the water level sits below the inner bucket level once it is placed back on top of the outer bucket.
- **Inner Bucket
**
- **Outer Bucket
**
- Inner bucket secured within Outer bucket
Step 2:
Push the Lever on the mop handle into the downwards position to allow the mop
to enter spinning mode. This allows the mop to spin 360° for washing and
drying.
Step 3:
Push the mop into the centre of the bucket repeatedly to wash and dry the mop
simultaneously. With clean water in the centre of the bucket, dirt and grime
accumulated from mopping is expelled to the sides of the bucket through the
spinning action, allowing for the clear separation of clean washing water, and
dirty water.
Step 4:
Push the lever on the mop handle back into the upwards position to enter
mopping mode. The mop can now be used to clean floors. Once the mop needs
washing, repeat step 4.
Need more information?
We hope that this user guide has given you the assistance needed for a simple
set-up. For the most up-to-date guide for your product, as well as any
additional assistance you may require, head online to
help.kogan.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>