MiBOXER C2 RF Timer Remote Mi-Light Instruction Manual
- June 1, 2024
- MiBOXER
Table of Contents
MiBOXER C2 RF Timer Remote Mi-Light
Specifications
- Model No.: C2
- Working Voltage: 3V (AAA * 2PCS)
- Transmitting Power: 6dBm
- Standby Power Consumption: 5A
Product Features
The C2 Remote Control (2.4GHz) offers the following features:
- Timing switch
- Two-way communication
- Vibration feedback
- Magnetic wall mount
- Easy control of 4 groups independently
Button Description
The buttons on the remote control allow you to:
- Select the group where the device is located
- Select the required timing time
- Cancel scheduled times when in timing state
- Master ON and OFF time zones
Linking/Unlinking Instructions
To link or unlink devices with MiBoxer series smart switches or smart sockets:
- Linking Instruction:
1. Turn off light after 10 seconds turn off
2. Short press I 3 times within 3 seconds when the light is on
3. Light flashing 3 times slowly indicates successful linking- Unlinking Instruction:
1. Turn off light after 10 seconds turn on
2. Short press I 5 times within 3 seconds when the light is on
3. Light flashing 10 times slowly indicates successful unlinkingInstallation Notes
- Take off the double-sided tape on the back of the base
- Stick the base well, and the remote control is magnetically attracted to the base
Attention
- This remote only controls specified Mi-Light / MiBoxer products; refer to the manual for details.
- Avoid using the remote control in humid or high-temperature environments for extended periods.
- Avoid using the remote control in large metal areas or environments with strong electromagnetic waves nearby to prevent control distance issues.
FAQ
- Q: Can the C2 Remote Control be used with other non-MiBoxer products?
- A: No, this remote control is designed specifically for use with Mi-Light / MiBoxer products only.
- Q : How do I change the batteries in the C2 Remote Control?
- A : To change the batteries, simply open the battery compartment on the back of the remote and replace the old batteries with new -ones.
Product Features
With a timing switch, two-way communication, vibration feedback and other functions (MiBoxer series smart switches and smart plugs only), with magnetic wall mount, easy to use 4 groups independently control the on/off of the device.
Product parameters
- Model No.: C2
- Working Voltage : 3V (AAA * 2PCS)
- Transmitting Power : 6dBm
- Standby Power Consumption : 5μA
- RF : 2.4GHz
- Working Temperature : -10~40°C
- Control Distance: 30m
Button Description
Time zone (0.5h, 1h, 2h, 4h, 8h)
- Select the group where the device is located.
- Select the required timing time(If the device is on, the scheduled function will turn off the device; otherwise, the scheduled function will turn on the device.)
Attention:
- When the device is in the timing state, Press the “I” or “O” or “ON/OFF” key of the group where the device is located to cancel the current scheduled time.
- The “ON / OFF” key can cancel the timing time of all groups.
Linking/Unlinking
Used with MiBoxer series smart switches or smart sockets, devices can be turned on/off at scheduled times.
Linking instruction
- Turn off light after 10 seconds turn off
- Short press ” I ” 3 times within 3 seconds when the light on
- Light flashing 3 times slowly means it is successfully
Linking fails if the light is not blinking slowly, Please follow the above steps again note: Light that has linked can’t link again)
Unlinking instruction
![MiBOXER-C2-RF-Timer-Remote-Mi-Light-FIG-4]](https://manuals.plus/wp- content/uploads/2024/05/MiBOXER-C2-RF-Timer-Remote-Mi-Light-FIG-4.png)
- Turn off light after 10 seconds turn on
- Short press ” I ” 5 times within 3 seconds when the light on
- Light flashing 10 times slowly means it is successfully
Unlinking fails if the light is not blinking quickly, Please follow the above steps again. (Note: Light hasn’t linked that doesn’t need to unlink)
Installation Notes
- Take off the double-sided tape on the back of the base
- Stick the base well, and the remote control is magnetically attracted to the base
Attention
- This remote-only control specified Mi-Light / MiBoxer products; for details please check the manual.
- This remote control is a precision electronic product, please do not use it in a humid or high-temperature environment for a long time. When not in use for a long time, please take out the battery and store it in a dry, static-free environ-ment.
- Do not use the remote control in a large area of metal or in an environment with strong electromagnetic waves nearby, otherwise the control distance will be seriously affected.
Made in China