Pro Breeze PB-F12 Bladeless Tower Fan and Air Purifier Instruction Manual
- June 17, 2024
- Pro Breeze
Table of Contents
Instruction Manual
Model PB-F12
Bladeless Tower Fan with Air Purifier
IMPORTANT INSTRUCTIONS
– RETAIN FOR FUTURE USE
BLADELESS TOWER FAN WITH AIR
PURIFIER | MODEL PB-F12
Thank you for choosing to purchase a product from Pro Breeze. Please read the entire manual carefully prior to first use and keep in a safe place for future reference.
IMPORTANT SAFETY INSTRUCTIONS
PLEASE READ AND SAVE THESE IMPORTANT SAFETY INSTRUCTIONS
When using electrical appliances, basic safety precautions should always be
followed to reduce the risk of fire, electric shock, and injury to persons,
including the following:
WARNING : TO AVOID THE RISK OF ELECTRICAL SHOCK, FIRE OR INJURY TO
PEOPLE, ALWAYS MAKE SURE THE APPLIANCE IS UNPLUGGED FROM THE ELECTRICAL OUTLET
BEFORE RELOCATING, SERVICING, OR
CLEANING IT.
-
Use this appliance only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to person.
-
The appliance is not to be used by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction.
-
The appliance must have a minimum 50cm clearance around all sides of the appliance. Take care that curtains or other objects are not sucked into the fan during operation.
-
Children of less than 3 years and pets should be kept away unless continuously supervised.
-
Do not leave children alone or unattended in the area where the appliance is in use.
-
Cleaning and user maintenance shall not be done by children unless continuously supervised.
-
Place the appliance on a flat, stable and dry surface and always keep the appliance in an upright position.
Operating the appliance in any other position could cause a hazard. -
There may be traces of odor during the first few minutes of initial use. This is normal and will disappear quickly.
-
Do not cover the appliance or restrict the air flow of the inlet or exhaust grills while in use.
-
Do not cover, obstruct or push objects into the vents and opening of the appliance as this may cause an electric shock, fire or damage the appliance.
-
Do not use this appliance to dry or heat clothes.
-
Do not use the appliance in high humidity or steam filled rooms.
-
Never place anything on top of the appliance.
-
Do not operate the appliance with wet hands.
-
Do not operate the appliance without the filter.
-
Do not use this appliance near water or in the immediate surroundings of a bath, shower or a swimming pool. Never place the appliance where it may fall into a bathtub or other water container.
-
Do not allow water or other liquids to run into the interior of the appliance, as this could create a fire and/or electrical hazard.
-
This appliance is intended for indoor household use and similar applications.
Do not use outdoors.
• Never leave the appliance unattended while in use. Always turn the appliance off and disconnected from the power supply when not in use.
• Do not use the appliance while sleeping or place it near a person who is sleeping.
• The mains cable should not hang down from the surface on which the appliance is placed in order to prevent the appliance from being pulled down.
• Avoid placing the power cord in areas where it can become a tripping hazard.
Do not place the power cord under carpeting or cover it with rugs, runners or similar.
• To avoid a circuit overload when using this appliance, do not operate another high-wattage appliance on the same electrical circuit.
• Always plug the appliance directly into a wall socket. Avoid using extension leads where possible as they may overheat and cause a risk of fire.
• Do not use this appliance with an external programmer, timer switch or any other device which would switch the appliance on automatically unless this has already been pre-built into the appliance by the manufacturer.
• Do not pull on the power cord. Never move, carry, or hang the appliance by the power cord.
• Do not kink or wrap the power cord and plug around the appliance, as this may cause the insulation to weaken or split, particularly where it enters the appliance.
• Ensure the mains cable is fully extended before use and arrange it so that it is not in contact with any part of the appliance.
• Do not operate the appliance with any safety guards removed.
• Do not operate the appliance if there are signs of damage to the appliance, power cord, or any of the accessories supplied. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or a similarly qualified
BATTERY SAFETY INSTRUCTIONS
This product is supplied with Button Cell – CR2025 Li-ion disposable
batteries.
PLEASE READ AND SAVE THESE IMPORTANT SAFETY INSTRUCTIONS
****BATTERY WARNING: KEEP OUT OF REACH OF CHILDREN.
Choking hazard. Do not swallow. Harmful if swallowed. Swallowing can lead to
chemical burns, perforation of soft tissue, and death.
Severe burns can occur within 2 hours of ingestion. If you think batteries
might have been swallowed or placed inside any part of the body, seek
immediate medical attention.
- This product only uses a Button Cell – CR2025 Li-ion battery. It is not compatible with other battery types.
- Do not allow children to handle batteries.
- If the battery compartment does not close securely, stop using the product and keep it away from children.
- Ensure that the battery is installed with the correct polarity (+ and –).
- Remove exhausted battery promptly.
- Always inspect new batteries before use. Damaged or weak batteries may leak acid. Discontinue use if batteries show signs of leakage, damage, or weakness at any time.
- Ensure the battery compartment is correctly and securely closed after installing the batteries.
- Wash hands after handling batteries.
- Disposable batteries are not rechargeable and must be recycled or disposed of separately from household waste. Always dispose of batteries at an official collection point and according to your local environmental laws and guidelines.
SYMBOLS EXPLAINED
| Class II Double Insulated / Reinforced Insulation Equipment.
---|---
| Equipment complies with the applicable UK safety requirements and
regulations.
| Equipment complies with the applicable EU safety requirements and
regulations.
| Please read instruction manual and retain for future use.
| For indoor use only.
SPECIFICATION
- Model: PB-F12
- Fan: DC 24V ****35W, 1.5A
- Adaptor Input: 100-240V~, 50/60Hz
- Adapter Output: DC 24V ****, 36W
- Product Dimensions: 235x230x800mm
- Net Weight: 3.55kg
PARTS
The Main Body:
- Air Duct
- Air Outlet
- LED Display
- Top Cover
- Air Inlet
- Base
- Air Duct
- Top Cover
- Air Inlet
- Body
- Socket for adapter
The Adapter:
12. Removable Panel
13. Connector
14. Main Body
15. Cord
OPERATING INSTRUCTIONS
Before First Use:
Air duct angle adjustments:
- Before adjusting the angle of the air duct, ensure the appliance is turned off and unplugged.
- Hold the appliance by the main body and tilt the air duct forwards or backwards by a 15-degree angle.
The Led Display:
- Filter Replacement Indicator Light
- Temperature Display
- AUTO Mode
- Settings and Humidity Display
- Power Button
-
Power Button: Press once to turn the appliance on. Hold down for one second to turn the oscillation of the fan on and off. Press repeatedly to adjust the wind speed. Hold down for two seconds to turn off the appliance.
-
Filter Replacement Indicator Light :
After 720 collective hours of operation, the Filter Replacement Indicator Light will indicate the filter needs to be replaced. Replace the filter following the instructions in the ‘Replacing the Filter’ section of this manual and then hold
down the power button on the remote for 5 seconds. The Filter Replacement Indicator Light will turn off and the filter lifetime will be reset. -
Temperature Display: This displays the current temperature.
Auto -
Auto Mode: If the appliance is in Auto Mode, this indicator will read ‘AUTO’.
-
Settings and Humidity Display: This indicator will display the current wind speed setting when changing between wind speed settings 1 – 9. Wind speed will be set when there have not been any changes for 5 seconds. The display
will then show the humidity level of the environment.
REMOTE CONTROL
ATTENTION : THIS APPLIANCE MAY RESPOND TO THE REMOTE CONTROL OF OTHER
DEVICES.
OTHER DEVICES MAY RESPOND TO THE REMOTE CONTROL OFTHIS APPLIANCE. THIS IS DUE
TO OVERLAPPING FREQUENCIES. TO AVOID THIS INTERFERENCE, KEEP THE REMOTE
CONTROL AWAY FROM OTHER ELECTRICAL DEVICES DURING OPERATION.
ATTENTION : THE POWER BUTTON ON THE REMOTE CONTROL RETURNS THE APPLIANCE
TO STANDBY MODE. TO COMPLETELY DISCONNECT AND POWER OFF THE APPLIANCE, UNPLUG
THE POWER CORD FROM THE SOCKET.
- Mode Adjustment Button
- Power Button
- Oscillation Adjustment Button
- Timer Button
- Auto Mode Button
- Wind Speed Adjustment Buttons
-
Power Button: When the appliance is in Standby Mode, press the power button once to turn it on. To return the product to Standby Mode, touch the power button again.
-
Mode Adjustment Button: Press the Mode Adjustment button to cycle through the options of Sleep Mode, Natural Mode and Maximum Mode.
Sleep Mode: The LED Display will read ‘LL’. This mode is the quietest as the wind speed is on its lowest setting.
Natural Mode: The LED Display will read ‘—‘. This mode is for everyday use as the wind speed setting is moderate.
Maximum Mode: The LED Display will read ‘HH’. This is the maximum wind speed. -
Oscillation Adjustment Button: Press once to turn on the oscillation function and press again to turn off the oscillation function.
-
Timer Button: Press the Timer Button repeatedly to cycle through the timer settings of 1 – 8 hours. When the time set has elapsed, the appliance will automatically turn off.
-
Auto Mode Button: Press the Auto Mode Button to set the appliance into Auto Mode. The fan speed will adjust itself according to the temperature of the room.
ROOM TEMP. | MODE | SPEED |
---|---|---|
≤10°C | Fan | 1 |
10°C-20°C | Fan | 3 |
21°C-30°C | Fan | 5 |
≥30°C | Fan | 9 |
- Wind Speed Adjustment Buttons:
Press the ‘+’ button to increase the wind speed and the ‘-‘ button to decrease the wind speed. The appliance has 9 wind speed settings.
SWITCHING ADAPTERS
WARNING : DO NOT HANDLE THE ADAPTER WITH WET HANDS.
ENSURE THE DEVICE IS TURNED OFF AND NOT CONNECTED TO ANY POWER SOURCE BEFORE
SWITCHING ADAPTERS.
Note : Always ensure you are using the correct removable panel for your
region.
To change the removable panel on your appliance, please follow the below
steps:
- To remove the current adapter, push down on the removable panel on the section marked ’push’ and slide it out.
- To insert the correct adapter, look for the grooves on the adapter and place the removable panel in the grooves.
- Push down on the removable panel and slide it into the body of the adapter.
BATTERY REPLACEMENT
To replace the battery, follow the below steps:
- Push the edge of the battery holding insert inwards, while pushing it upwards.
- Pull out the battery holding insert and remove the battery.
- Place the new battery in the battery holding insert and push it back into the remote.
CAUTION : IF THE REMOTE CONTROL WILL NOT BE USED FOR A LONG TIME, REMOVE
THE BATTERY.
CAUTION : THE BATTERY IS NOT RECHARGEABLE. DO NOT ATTEMPT TO RECHARGE THE
BATTERY.
FILTER REPLACEMENT
- Lift off the top cover.
- Remove the old filter by pulling it upwards.
- Insert the new filter into the main body of the appliance.
- Replace the top cover. It is magnetised and will automatically snap into place.
CLEANING AND MAINTENANCE
WARNING : ALWAYS TURN THE APPLIANCE OFF AND UNPLUG THE POWER CORD FROM
THE ELECTRICAL OUTLET BEFORE HANDLING OR CLEANING IT.
CAUTION : DO NOT ALLOW WATER OR OTHER LIQUIDS TO RUN INTO THE INTERIOR OF
THE APPLIANCE, AS THIS COULD CREATE A FIRE AND/ OR ELECTRICAL HAZARD.
CAUTION : DO NOT USE ANY ABRASIVE CLEANERS OR SOLVENTS, AS THIS CAN
DAMAGE THE APPLIANCE. DO NOT ATTEMPT TO CLEAN THE APPLIANCE IN ANY OTHER WAY
THAN THAT DETAILED BY THE MANUFACTURER.
CAUTION : DO NOT USE ANY TOXIC, CORROSIVE, OR ABRASIVE CLEANING AGENTS OR
SCOURING SPONGES TO CLEAN THE APPLIANCE OR THE ACCESSORIES SUPPLIED. THESE CAN
DAMAGE THE SURFACE. DO NOT SPRAY CLEANING AGENTS DIRECTLY ONTO OR INTO THE
APPLIANCE.
-
Product Surface: Clean the exterior surface of the appliance by wiping it with a soft, damp cloth. Dry the appliance with a soft, clean cloth.
For extreme dirt, use a soft cloth dampened with a mild, diluted detergent to clean, and then wipe dry with a soft cloth. -
Air Inlet and Air Outlet: Regularly clean off accumulated dust using a vacuum cleaner or a soft brush. Do not let dust build up, it will reduce the efficiency of the appliance.
-
Remote Control: Gently wipe the surface of the remote control with a soft cloth.
If the remote control will not be used for an extended period, remove the battery inside. -
Adapter: Gently wipe the surface of the adapter with a soft cloth.
-
Filter : To extend the lifespan of the filter, use the brush attachment on a vacuum cleaner to remove dust from the surface of the filter.
STORAGE
- Store the appliance in a safe, clean and dry place, away from direct sunlight and out of reach of children when not in use.
- To store your product, we recommend using the original or a similar sized box.
RECYCLING & DISPOSAL
Waste electrical and electronic products (WEEE), batteries, accumulators, and
packaging should not be disposed of with general household waste. This is to
prevent possible harm to the environment and human well-being, and to help
conserve our natural resources. Most electrical products with a plug, battery,
or cable can be recycled.
Contact your local council, household waste disposal service, or the store
where you purchased the product for information regarding the collection
schemes in your area.
Waste Electrical and Electronic Equipment (WEEE)
This symbol on the product and/or packaging indicates that Waste Electrical
products (WEEE) under Directive 2012/19/EU which governs used electrical and
electronic appliances, should not be disposed of with general household waste.
Waste Batteries and Rechargeable Batteries
This symbol on the batteries supplied with your product indicates that Waste
Batteries under Directive 2006/66/EC which governs used batteries and
accumulators should not be disposed of with general household waste. If the
battery contains more than 0.004% lead, the battery symbol will be accompanied
by the letters (PB).
The Mobius Loop
This symbol indicates that the product or packaging is capable of being
recycled.
Take-Back Scheme
Waste electrical products (WEEE) can be sent to One Retail Group for recycling
and disposal when you purchase a new product from One Retail Group, on a like-
for-like basis. For more information on how to recycle this product please
visit www.probreeze.com
The end-user of electrical and electronic products (WEEE) is responsible for
separating old batteries and lamp bulbs before they are handed over to a
designated disposal and recycling service. Waste batteries can also be
disposed of in
collection bins, which can be found in most local supermarkets and household
waste recycling centres.
TROUBLESHOOTING
Error Code | Problem | Cause |
---|---|---|
El | Low Voltage Protection | •Induced by voltage too low. |
•220V fan connected to 110V voltage.
E2| High Voltage Protection| •Induced by voltage too high.
E3| Blocked Rotor| •Poor connection between rotor terminal block and
electronic board.
•Circuit driver, power component (MOSFET) or other components damaged by outer
forces, Electronic board parameter error.
E4| Hardware Overcurrent| •Short circuit of fan rotor or inner rotor.
•Driver error or power component (MOSFET) error.
E5| Software Overcurrent| •Current sampling circuit error.
E6| Rotor disconnection| •Poor connection between rotor and terminal block.
•Driving error of driver.
E7| Communication Error| •Poor communication between display board and mother
board, poor cable connection.
E8| Machine Tilting| •Machine placed at an angle of 30
degrees against the surface.
E9| Temperature-sensor probe malfunction| •Temperature sensor probe poor
connection.
www.probreeze.com
One Retail Group, Ryland House,
24a Ryland Road, London, NW5 3EH, United Kingdom
EU Authorized Representative: Brandrep Limited, The Black Church,
St Mary’s Pl N, Dublin, D07 P4AX, Ireland
© Copyright 2023
Documents / Resources
| Pro
Breeze PB-F12 Bladeless Tower Fan and Air
Purifier
[pdf] Instruction Manual
PB-F12 Bladeless Tower Fan and Air Purifier, PB-F12, Bladeless Tower Fan and
Air Purifier, Tower Fan and Air Purifier, Fan and Air Purifier, Air Purifier,
Purifier
---|---
References
- Pro Breeze | Free Delivery | Dehumidifiers, Air Cooling & Heaters
- Pro Breeze | Free Delivery | Dehumidifiers, Air Cooling & Heaters
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>