KingForce IP54 Fingerprint Door Lock User Guide
- June 1, 2024
- KINGFORCE
Table of Contents
KingForce IP54 Fingerprint Door Lock
Product Name
Specifications :
- Default Master Code : 123456
- Customizable Access Code: 4-10 digits
- Can store up to 20 access codes, 1 Time Pin Code, and 100 user fingerprints
Product Usage Instructions
Setting up User Codes and Fingerprint:
To add a new User Code or User Fingerprint:
- Access the menu to add a new user.
- Enter a new User Code.
- Scan the new User Fingerprint 8 times to register it.
- If you want to add more users, repeat the process.
Adding One-Time Code:
To add a One-Time Code:
- Access the menu to add a One-Time Code.
- Enter the desired code.
Activating Silent Mode:
To enable or disable Silent Mode:
- Access the settings menu.
- Toggle between Silent Mode Enabled or Disabled.
- Enter the Master Code (default: 123456) to confirm changes.
Frequently Asked Questions (FAQ):
-
Q: How many user fingerprints can be stored in the system?
A: The system can store up to 100 user fingerprints in total. -
Q: Can I customize the length of the Access Code?
A: Yes, the Access Code can be customized to be between 4 to 10 digits long.
Quick Setup Guide
Important： For your security, please change the default master password to reduce the risk of password compromise.
Programming Instructions
- Default Master Code: 123456.
- Customizable Access Code: 4-10 digits.
- Tips: You can change the Master Code and add up to 20 access codes, 1 Time Pin Code, and 100 user fingerprints.
Note: King Force is the Multi-Function button in Exterior Assembly
.
Note: While Vacation mold enabled, if you use master code to unlock or
enter management mode, then Vacation mode will be disabled.
Restore To Factory Default Settings
The default Master Code is 123456.
- Open and unlock the door.
- Take out one battery, then press random keypad to consume the rest power.
- Press the Reset Button with the Reset tool (K), then keep pressing and place the battery back.
- Keep holding the Reset Button until you hear 2 beeps. (If just hear one beep, please do it again from step 1)