kogan KABRSTRGCBA Beard Straightener Heated Comb User Guide

kogan Beard Straightener Heated Comb

SAFETY & WARNINGS

IMPORTANT SAFETY INSTRUCTIONS
When using electrical appliances, especially when children are present, basic safety precautions should always be followed, including the following:

• Read all instructions before using
• Retain this user guide for future use
• Keep away from water

DANGER – Any appliances are electrically live even when the switch is off, to reduce the risk of death or injury by electric shock:

• Always unplug appliance immediately after using
• Do not use while bathing or in a shower
• Do not place or store appliance where it can fall or be pulled into a tub or sink
• Do not place in, or drop into, water or other liquids
• If an appliance falls into water, unplug it immediately.
• DO NOT reach into the water.

WARNING – To reduce the risk of burns, electrocution, fire, or injury to persons:

• This appliance should never be left unattended when plugged in.
• This product is not intended for use by persons (including children) with reduced physical, sensory or metal capabilities or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the product in a safe way by the person responsible for their safety, and understand the hazards involved.
• Use this appliance only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer.
• Never operate this appliance if it has a damage cord or plug, if it is not working properly, if it has been dropped, damaged or dropped into water. Cease use immediately and contact Kogan.com for support assistance.
• Keep the cord away from heated surfaces. Do not pull, twist, or wrap line cord around appliance, even during storage.
• Never use while sleeping
• Never drop or insert any object into opening.
• Do not use an extension cord to operate hair straightening brush.
• Do not direct hair straightening brush toward eyes or other heat-sensitive areas.
• Hair straightening brush will be hot during use. Allow to cool before storing.
• Do not place appliance on any surface while it is operating.
• Do not use with voltage converter.

OVERVIEW

OPERATION

1. Ensure hair is dry and neatly groomed before using.
2. Insert the plug into a wall outlet (110-240V, 50/60H).
3. Press the Power button (for 1 second) to turn the device on. It will automatically begin in the default temperature setting (Mode 1 – Normal).
   The red LED represents the power being on, and the blue LEDs represent the modes:

(302°F)

| 1 Red (Power)

1 Blue

2| Coarse, wavy hair| 180°C

(356°F)

| 1 Red (Power)

2 Blue

3| Thick, curly hair| 210°C

(410°F)

| 1 Red (Power)

3 Blue

Flashing Blue LED means the temperature is rising. When the Mode’s full temperature has been reached, the LED will stop flashing and remain solid.

4. Wait for the blue LED to stop flashing to know it has reached temperature.
5. To change mode, Short-Press the Power button. It will cycle through the modes in order (1-2-3, repeating). Allow time for the temperature to rise for each mode (the additional blue LED will flash until full temperature is reached).
6. To turn off the device, Long-Press (press and hold) the Power button for 2 seconds.
7. After 30 minutes of continuous use, the device will automatically end the session and turn off. To continue using, simply press the Power button for 1 second.

USAGE ADVICE

Using the device
To use, one hand pulls hair end and comb hair with straightener.
We recommend that you choose the highest Mode setting at the beginning, then reduce the temperature level depending on your hair texture.
If you want to help keep the hair straight for longer periods of time after use, we recommend using hairstyling lotion, softening lotion, and ensuring hair is clean before straightening.

CLEANING & CARE

Cleaning
Regularly clean the device after use to clear hair residue.

• After turning off, unplug the device and let cool completely before cleaning it.
• Use a damp cloth to clean carefully. To clean dust and lint from comb teeth, use a small brush.
• The outer surface of the appliance should be wiped clean with a cloth only.
• Make sure the appliance is completely dry before using again.

User Maintenance
Your hair straightening brush is virtually maintenance free. No lubrication is needed. For proper operating performance, the hair straightening brush must be clean. If the unit or the heat turns off unplug the cord and allow the hot air style to cool for 10 to 15 minutes before restating.

Caution
NEVER allow the power supply cord to be pulled, twisted, or severely bent. Never wrap the cord tightly around the comb teeth (even when turned off and in storage).
Stop use immediately if damage is visible or unit stops or operates intermittently.
If the cord or hair straightening brush is damaged or does not operate properly, return it for repair to an authorized service representative only. No repairs should be attempted by the consumer.

Storage – Important!
When not in use, your hair straightening brush should be disconnected, allowed to cool and stored in a safe, dry location, out of reach of children. Do not wrap line cord around hair straightening brush.

SPECIFICATIONS

(302°F)

| 180°C

(356°F)

| 210°C

(410°F)

Automatic shut-off| 30 minutes

Need more information?
We hope that this user guide has given you
the assistance needed for a simple set-up.
For the most up-to-date guide for your product,
as well as any additional assistance you may require, head online to help.kogan.com

References

• Kogan Help Centre

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>