WALI MATI001-G Single Monitor Desk Mount Instruction Manual
- June 7, 2024
- WALI
Table of Contents
WALI MATI001-G Single Monitor Desk Mount Instruction Manual
WARNING
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use.
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:
- NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF MONITOR OR STAND.
- USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL.
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIP OVER.
SMALL PARTS- NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
Supplied Parts List
Setup
Step 1
Step 2
Option A: Clamp Installation
Option B: Grommet Base Installation
Step 3
Step 4
Step 4.1
Step 4.2
Step 5
Step 6
To properly balance the arm with monitors mounted, adjust the spring tension with Allen Key 5mm O .
Step 7
Pull the bottom cable slot cover to detach it off the arm. Guide the cable
through the cable slot and slide the cover back to arm.
Step 8
Screw Adjustable to prevent monitor arm from swinging into screens or walls.
Step 9: Angle Adjustments
Thank for choosing us!
We support the technology that brings your home to life. We offer high quality products, professional customer service, and extensive technical support.
If you have any questions,please contact us.
1-844-SATTLER (18447288537)
[email protected]
www.walielectric.com
Read More About This Manual & Download PDF: