WALI TV Ceiling Mount Adjustable Bracket Fits Most LED, LCD, OLED and Plasma Flat Screen Display-User Instructions

WALI TV Ceiling Mount Adjustable Bracket Fits Most LED, LCD, OLED and

Plasma Flat Screen Display

Specifications

• SIZE: 26-Inch to 65-Inch
• STYLE: 26-Inch to 65-Inch Ceiling Mount
• COLOR: Black
• MOUNTING TYPE: Tilt
• MOVEMENT TYPE: Rotate, Swivel, Tilt
• BRAND: WALI
• MATERIAL: Alloy Steel
• TV SIZE: 65 Inches
• COLOR: Black
• MINIMUM COMPATIBLE SIZE: 26 Inches
• COMPATIBLE DEVICES: Televisions
• MAXIMUM TILT ANGLE: 25 Degrees
• PACKAGE DIMENSIONS: 16.14 x 9.45 x 3.86 inches
• ITEM WEIGHT: 10.5 pounds

Introduction

Fits most 65-inch monitors and weighs 110 pounds. 400×400 300×300 200×200 200×100 100x100mm VESA (mounting hole design). Solid steel construction keeps the display in place and makes installation a breeze. It can be installed on a flat or inclined ceiling, a vaulted ceiling, or 90 degrees flat against a joist side. Tilt down 25°, 360° left-right swivel range, 3° rotation in both directions 2″ incremental height adjustment from ceiling to center of mounting plate from 18.5″ to 35.2″ for perfect viewing angles. Ideal for high-ceilinged homes, pubs, restaurants, fitness centers, schools, supermarkets, dental and medical offices, home installs, and more.

PACKAGE CONTAINS

• TV Ceiling Mount x 1
• Mounting Hardware Kit x 1
• experienced and friendly US based customer support available to assist 7 days a week
• User Manual x 1

WARNING
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use.

A TIP OVER WARNING
Serious or fatal crushing injuries can occur from tip over.

TO HELP PREVENT TIP OVER

• Never allow children to climb, stand, hang, or play on any part of monitor or stand.
• Use tip over restraint or anchor stand to wall.
• Use of tip over restraints may only reduce, but not eliminate risk of tip over.
• Small parts- not for children under 3 years. Adult supervision is required.

SUPPLIED PART LIST

WOOD JOIST CEILING

If you install this product on wood stud wall, mark the position with provided Marking Center Finder K and pencil on the wall Drill 3/16″(4.5mm) diameter x 2.255mm) length hole at the marked position, attach the Ceiling Mount Pole A to wall and tighten using 4pcs Bolt V-A Washer C with provided Wrench. Use both Allen Key and Wrench to tighten for stability after pole angle adjusting finished.

CONCRETE CEILING

If you install this product on concrete wall, mark the position with provided Marking Center Finder and pencil on the wall. Drill 1/2″(12mm) diameter x 1.8″(45mm) length hole at the marked position, attach the Ceiling Mount Pole A to wall and tighten using 4pcs Concrete Anchor V-B with provided Wrench. Use both Allen Key and Wrench to tighten for stability after pole angle adjusting finished.

STEP 2

• Guide the cable through the opening cable slot on Ceiling Mount Pole A attach the Extension Pole B 32 pcs
• Extension Pole C and Extension Pole D one by one and tighten using 6pcs M8x60 Bolt Nut on the top
• three joint connections with provided Allen Key J and wrench image shown, tighten the bottom joint
• connection using 2pcs M8x55 Bolt G& Nut H.

STEP 3

STEP 3.1

STEP 3.2 a

Select M4x14 Bolt M-A Or M5x14 Bolt B according to your TV/monitor, bolt VESA plate together with D5 Washer M-E into the mounting holes on the back of TV/Monitor, tighten with screwdriver. If select M6x14 Bolt M-C or M8x20 Bolt D according to your TV/Monitor, bolt VESA Plate together with D8 Washer M-F onto the mounting holes on the back of TV/Monitor, tighten with screwdriver. Screwdriver needed but not included)

STEP 3.2 b

Bolt VESA Plate E using M8x20 Bolt M-D D8 Washer -F together with Spacer G to the mounting holes on the back of TV/Monitor with screwdriver to tighten. (Screwdriver needed but not included)

STEP 3.2 c
Bolt adapter K onto the VESA plate using the bolt and nut with a provided wrench or screw driver to tighten. (Screwdriver not include)

Step 3.2d

1. Four bolt methods available for multiple TV/Monitor specification.
2. Bolt M6x30 Bolt M-A or M8x30 Bolt M-B together with D8 Washer M-F pacer with screwdriver to tighten;
3. Bolt M6x30 Bolt M-A or M8x30 Bolt M-B together with D8 Washer M-F pacer with screwdriver to tighten
4. Bolt M6x30 Bolt M-A or M8x30 Bolt BM8x20 Bolt M-D together with D8 washer with screwdriver to tighten;
5. Bolt M6x30 Bolt M-A or M8x30 Bolt-B M8x20 Bolt ether with D8 Washer with screwdriver to tighten. (Screwdriver needed but not included)

STEP 4
Twist counter clockwise to take off the bottom nut on the VESA Plate and twist counter clockwise to loosen the top 2 nut.

Hang the assembled TV/Monitor onto the assembled Monitor Mount Pole (D) twist clockwise to tighten the three nuts on the VESA Plate E or stability as image shown.

User provided Allen Key J to loosen the nut on the back of Monitor Mount Pole image shown to left/right swivel 360 of the TV/Monitor. Use provided Wrench i to loosen the bottom nut on the side of Monitor Mount Pole image shown to tilt down 25: Use provided Wrench i to loosen the three nuts on the VESA Plate rotate3/-3

FAQs

Is it possible to hang a television from the ceiling?
If you mount a TV to ceiling joists or wall studs, you can avoid using anchors. Without anchors, mounting a TV that is not supported by studs or joists can cause the TV to fall, causing damage or injury.

How do you hang a television from the ceiling?

• Putting the TV Mounting Brackets Together…
• Examine the TV’s mounting slots on the back…
• Fix the mounting brackets to the back of the television….
• Make sure the TV mounting brackets are securely fastened.
• Complete any remaining TV bracket components.
• Putting the Ceiling Mounting Plate in Place.

Is it possible to hang a 70-inch TV from the ceiling?
The SANUS LC1A is a ceiling mount that tilts and swivels for TVs measuring 37″ to 70″. When wall installation isn’t an option, this mount is a wonderful option for saving space. It features tilt and swivel for a great picture, as well as cable management and an easy installation.

Can a TV be mounted on a slanted ceiling?
It may be mounted to both flat and inclined ceilings, tilting up to 60 degrees and fastened at 90 degrees. The 360-degree swivel TV hanging TV mount can also tilt to a 25-degree inclination, allowing for the greatest viewing angle while keeping glare out of sight.

How high should a TV be mounted over the mantle?
If your mantel is less than four feet from the floor, you should install your TV about 12 inches above it, according to the rule of thumb. This guideline also applies to a fireplace that does not have a mantel.

https://www.manualshelf.com/manual/wali/cm2665xl/user-manual- english/page-12.html

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>