WALI SON003-W Soundbar Wall Mount Instruction Manual

SON003-W Soundbar Wall Mount
Instruction Manual INSTALLATION MANUAL
Sound Bar Wall Mount
SON003-B/SON003-W

SON003-W Soundbar Wall Mount

WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may  cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use.
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER.
TO HELP PREVENT TIPOVER:
• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY
PART OF MONITOR OR STAND.
• USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL.
USE OF TJPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT EUMINATE RISK OF TIP OVER.
SMALL PARTS- NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

Supplied Parts List

Step 1
Attach the Center Plate B to the Brackets A with Bolt C , and tighten using Allen Key E .

Step 2
Option A Solid Wood Wall

1. Align the top edge of the mount with the bottom of your TV and keep 5.5 inch away from your TV and mark the 4 screw locations. Making sure the arrow in the center is pointed into the center of TV.
2. Drill holes at the marked positions.
3. Place the wall mount bracket over the marked screw locations. Insert Screws W-A into the mounting holes and tighten using a screwdriver.

Step 2
Option B Wood Stud

1. Align the top edge of the mount with the bottom of your TV and keep 5.5 inch away from your TV and mark the 2 screw locations. Making sure the arrow in the center is pointed into the center of TV.
2. Drill holes at the marked positions.
3. Place the wall mount bracket over the marked screw locations. Insert Screws W-A into the mounting holes and tighten using a screwdriver.

Step 2
Option C  Concrete/Brick Wall

1. Align the top edge of the mount with the bottom of your TV and keep 5.5 inch away from your TV and mark the 4 screw locations. Making sure the arrow in the center is pointed into the center of TV.
2. Drill holes at the marked positions.
3. Insert the Anchors W-B into the mounting holes. Place the wall mount bracket over the marked screw locations. Insert Screws W-A into the mounting holes and tighten using a screwdriver.

Step 3
Screw the 2 Knobs D into the back of soundbar until they are fully tightened.

Step 4
Connect the power and HDMI cables to the back of the soundbar.
Note: If you are connecting the cables to the TV at this time, be sure to plug the HDMI cable into HDMI ARC port on your TV.

Step 5
Slide the soundbar down so the knobs fit into the slots on the bracket. Make sure the touch controls are facing up and SONOS ARC is fully seated.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>