WALI GSM001XL Heavy Duty Monitor Arm Installation Guide
- May 15, 2024
- WALI
Table of Contents
WALI GSM001XL Heavy Duty Monitor Arm
SAFETY INSTRUCTION
- Read the entire instruction manual before you start installation and assembly.
- If you have any questions regarding any of the instructions or warnings, please contact your local distributor for assistance.
- CAUTION: Use with products heavier than the rated weights indicated may result in instability causing possible injury.
- Please closely follow the assembly instructions. Improper installation may result in damage or serious personal injury.
- Safety gear and proper tools must be used. This product should only be installed by professionals.
- Make sure that the supporting surface will safely support the combined weight of the equipment and all attached hardware and components.
- Use the mounting screws provided and DO NOT OVER-TIGHTEN mounting screws.
- This product contains small items that could be a choking hazard if swallowed. Keep these items away from children.
- This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury.
- IMPORTANT: Ensure that you have received all parts according to the component checklist before installation.
- If any parts are missing or faulty, contact your place of purchase for a replacement.
- MAINTENANCE: Check that the product is secure and safe to use at regular intervals (at least every three months).
TOOLS
INSTALLATION INSTRUCTION
CLAMP INSTALLATION
GROMMET INSTALLATION
- To properly balance the arm with monitors mounted, adjust the spring tension using the supplied Allen Key as follows:
- First, position and firmly hold the arm horizontally as shown. Ask for assistance should you require it.
- CAUTION: To avoid damage to monitors or mounts, always keep the arm in a horizontal position while making adjustments.
- Again, ask for assistance if required.
- If the arm drops, turn the adjustment screw counter-clockwise until it stays in a horizontal position.
- If the arm rises, turn the adjustment screw clockwise until it stays in a horizontal position.
CAUTION:
- DO NOT over-tighten the screws.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>