LINDY BNX-60 Wireless Noise Cancelling Headphones User Manual
- June 6, 2024
- LINDY
Table of Contents
BNX-60
Wireless Noise Cancelling Headphones
Introduction
Thank you for purchasing the BNX-60 by LINDY. These wireless noise-canceling headphones have been developed to deliver superb quality Hi-Fi sound using advanced aptX® technology without the distraction of annoying background noise.
Product Contents
• BNX-60 Headphones
• 3.5mm audio cable 1.5m
• 1/4’’ stereo-plug adapter
• Dual-plug flight adapter| • Micro USB charging cable 80cm
• Hard carry EVA case with mesh pouch
• User manual
---|---
Features and Benefits
Overview
Left
- USB Socket (for charging)
- Volume Down / Previous Song (Wireless only)
- Multi-Function Button: On/Off, Pairing, Make/Answer/End/Reject Call (Wireless only)
- Volume Up / Next Song (Wireless only)
- Microphone
- 3.5mm Audio Jack
- Battery Indicator
Right - Volume Control Dial (Wireless,Noise Cancelling or Wired)
- Noise Cancelling On/Off Switch
- Noise Cancelling Indicator
Safety
- Check the volume level before placing the headphones over your ears
- Do not listen to the headphones at high volume for excessive periods as this may damage your hearing
- Discontinue use if you experience any discomfort or irritation from using the headphones
- These headphones must not be worn whilst driving a motor vehicle
Charging the Battery
- When the battery is low the LED (7) will flash red and an audio prompt (five beeps) will be heard through the headphones. If you’re using a compatible iOS device you can also see the status of the headphones battery on your device.
- Plug the supplied USB charging cable into the charging port on the headphones (1).
- Plug the other end of the USB charging cable into the corresponding port on either a USB main power supply or a PC.
- The LED indicator will light up red.
- Charging from empty will take approximately 3 hours.
- When the battery is fully charged, the LED indicator will switch from red to off.
Important! Make sure that the BNX-60 is fully charged for at least 4 hours prior to initial use.
Operation
The BNX-60 can be used in a number of different configurations to suit your needs; Wired, Wireless, Noise Cancelling, and Passive. For optimum audio performance, we recommend using the headphones with Noise Cancelling activated.
Noise Cancelling
- Adjust the volume of the BNX-60 using the Volume Control Dial (8) to ensure the volume is not too high.
- Switch on the Noise Cancelling feature by sliding the On/Off Switch (9) to On, the Noise Cancelling Indicator (10) will illuminate Blue
- A quiet hissing sound may occur when ANC is activated. This is known as the “noise floor” of electronics. This is perfectly normal and not a malfunction of the product. With no audio playback, this may be audible, however, once the audio is played, this can rarely be heard.
When using the Noise Cancelling feature, if the battery level becomes low, the Noise Cancelling Indicator will become dim. If you continue to use the Noise Cancelling feature the battery will eventually drain. If you are using a wired connection you may still continue to use the headphones.
Pairing
- Switch on the Wireless function by pressing and holding the Multi-Function Button (3). If no previously paired device is found within range, the BNX-60 will automatically go into pairing mode and the LED Indicator will alternately flash Green and Red.
- Enable the Bluetooth function on your mobile phone or tablet.
- Navigate to the Bluetooth menu of your device and scan/search for new devices.
- When BNX-60 is found, select it and follow the on-screen prompts. If you are prompted for a passkey or pin-code, please use 0000.
- You will see a notification on your portable device confirming that the pairing and connection is complete.
Music Playback
Play/Pause Music| Press down the Multi-Function Button once to start playing
music and press it again to pause your music.
---|---
Play/Pause Music| Press the Music/Volume Forward Control button to play the
next song. To play the previous song, Press the Music/Volume Backward
Control button.
Adjust Volume| Press and hold the Music/Volume Forward Control button to
increase the volume. To reduce the volume, press and hold the Music/Volume
Backward Control button. In addition, the volume can be adjusted using the
Volume Control Dial (8).
Call Related Functions
| Answer a call | Press the Multi-Function Button once to answer |
|---|---|
| End a call | Press the Multi-Function Button again to end |
| Ignore a call | Hold the Multi-Function Button for 3 seconds |
| Last number redial | Press the Multi-Function Button twice in standby status |
| Swap calls | Press the Multi-Function Button for 3 seconds |
Voice Dialling
The BNX-60 can be used for voice dialing if this feature is supported on your mobile phone. Please refer to your mobile phone’s manual for more information. To use the voice dialing feature, press and hold the multifunction button and wait for the voice prompt before saying the name of the contact you want to call.
LINDY Electronics Ltd.
Sadler Forster Way
Teesside Industrial Estate
Thornaby, Stockton-on-Tees
TS17 9JY, England
Declaration of Conformity
LINDY Part Number: 73136
Description: BNX-60 Wireless Noise Cancelling Headphones
We, LINDY Electronics LTD, hereby declare that the above product is in
conformity with the EU Directive 2014/30/EU (Electromagnetic Compatibility),
2014/53/EU RE (Radio Equipment) and 2011/65/EU (Restriction of the use of
certain hazardous substances – RoHS 2).
The following standards were used to evaluate the product:
ETSI EN 300 328 V2.1.1 (2016-11)
ETSI EN 301 489-1 V2.2.0 (2017-03)
ETSI EN 301 489-17 V3.2.0 (2017-03)
EN 50581:2012
Date: 10 July 2017
Signature:
Name: Darren N. Casey
Position: Managing Director, LINDY Electronics LTD
BNX-60
Wireless Noise Cancelling Headphones
Manufacturer (EU):
LINDY Electronics Ltd.
Sadler Forster Way Teesside Industrial Estate Thornaby, Stockton-on-Tees
TS17 9JY, England
T: +44 (0) 1642 754000
postmaster@lindy.co.uk
For Home and Office Use Tested to Comply with FCC Standards
FCC Certification
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
You are cautioned that changes or modifications not expressly approved by the
party responsible for compliance could void your authority to operate the
equipment.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Recycling Information
WEEE (Waste of Electrical and Electronic Equipment), Recycling of
Electronic Products Europe, United Kingdom
In 2006 the European Union introduced regulations (WEEE) for the collection and recycling of all waste electrical and electronic equipment. It is no longer allowable to simply throw away electrical and electronic equipment. Instead, these products must enter the recycling process. Each individual EU member state has implemented the WEEE regulations into national law in slightly different ways. Please follow your national law when you want to dispose of any electrical or electronic products. More details can be obtained from your national WEEE recycling agency
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>