Sengled Smart LED Bulbs User Guide
- June 6, 2024
- Sengled
Table of Contents
USER GUIDE
Sengled Smart LED
- Soft White A19 Bulbs
- Daylight A19 Bulbs
- Extra Bright Soft White A19 Bulbs
- Extra Bright Daylight A19 Bulbs
- Soft White BR30 Bulbs
- Multicolor A19 Bulbs
- Multicolor BR30 Bulbs
- Multicolor B11 Candle Bulb
- Vintage Edison ST19 Bulb
Introduction:
Sengled Smart LED bulbs offer an easy solution to having app-controllable
smart lighting in your home. These bulbs enable you to control your lights in
multiple ways— on/off, dimming, schedules, etc.— through the Sengled Home app
on your phones or through partner programs like Amazon Alexa, Google Assistant
or Apple HomeKit (Sengled smart hub E39-G8C required).
Note: A hub is required to control these bulbs.
Important Safety Information:
Before installing the Sengled Smart LED bulbs, please read and follow all precautions, including:
- Turn off power before installation or removal. Discontinue use if damaged.
- Warning: risk of electric shock. Do not attempt to disassemble the bulb.
- Not suitable for use with wall dimmers.
- Suitable for use in operating environment between -4°F and 104°F (-20°C and 40°C).
- Not for use in emergency lighting.
- Indoor use only.
Wireless Specification：
Wireless Frequency Range:
2.4GHz (2405MHz~2480MHz, IEEE 802.15.4)
Operating channels Zigbee: 11-26
Maximum Transmitted Output Power: +10dBm
Installation Instructions:
The following instructions are applicable to adding your Smart LED bulb to a
Sengled Smart Hub. If you DO NOT have Sengled Smart Hub and Sengled Home app
previously installed, please install your hub according to its user guide in
the package before installing bulbs. If you have third-party hubs, such as
SmartThings or Amazon Echo Plus, you also can connect Sengled Smart bulbs to
these hubs according to their instructions in apps. If you would like to find
our latest list of supported third-party hubs, please refer to
support.sengled.com.
Note: Please ensure your mobile device is connected to the same wireless
router that your Sengled smart hub is connected with using 2.4G Hz.
- Open the Sengled Home app. Go to Devices, select the + sign, and choose Smart LED Lights (from Zigbee Devices Hub Required). Follow in-app instructions to finish the installation.
- Ensure your Sengled Home app can discover the bulbs. If the app could not discover the bulbs, please use the “Add Device Manually” option (QR code scan method). If it still doesn’t work, please refer to the next section “Reset Instructions” for how to reset your bulb before attempting to add it back in. Congratulations on successfully setting up your smart bulbs!
Reset Instructions:
To reset your Smart LED bulb, ensure that the bulb is on and then quickly turn the bulb off and on at least 10 times (using a light switch or power bar works best). If the reset is successful, the bulb will flash five times. If it does not flash five times, you will have to try again. Once successfully reset, please try to pair it in your Sengled Home app again.
Operation:
The following section outlines some of the popular operational modes of the Sengled Smart LED bulbs. Applicable to all smart LED bulbs:
A. On / Off
Smart LED bulbs can be controlled through a variety of means:
-
Manually via a wall switch
-
Through the Sengled Home app (including Widget)
-
Through partner programs like Alexa,
Google Assistant, HomeKit, etc. -
Through Sengled Smart Light Switch
B. Dimming
Smart LED bulbs can be dimmed through the following：
-
Through the Sengled Home app (including Widget)
-
Through partner programs like Alexa,
Google Assistant, HomeKit, etc. -
Through Sengled Smart Light Switch
Note : Manual dimming via wall dimmers is not supported.
C. Scheduling
Schedules can be created with the Sengled Home app.
Check the in-app how-to pages through “Settings” for the following two
operations.
D. Third-Party Voice Control
-
Set up Amazon Alexa by adding
Sengled Home Skill. -
Set up Google Assistant by adding
Sengled Home Service. -
Setup Apple HomeKit by “Add Accessory” from iOS Home app. (Sengled smart hub E39-G8C required)
If you have Sengled Smart LED Multicolor bulbs, the following operations are also available:
E. Tuning Whites
Adjust whites via the white palette in the Sengled Home app, or with voice
control.
F. Changing Colors
Change between 16 million colors using the color palette in the Sengled Home
app, or with voice control.
Frequently Asked Questions:
-
Are Sengled Smart LEDs suitable for use with wall dimmers?
No, Sengled Smart LEDs are not suitable for use with wall dimmers, or other variable power devices. Dimming is supported via the Sengled Home app or compatible smart devices only. -
Sengled Smart LED bulbs appear offline or unresponsive, what should I do?
a) Please check the light switch and make sure that it’s switched On.
b) Refresh the status of your Sengled Home app, navigate to the Home tab, swipe down and then release.
c) Check the status of your smart hub; make sure the LED indicator lights are on properly. If the Power LED is off, please check the power adapter; If the Ethernet LED is off, please check the Ethernet cable connection. -
Can different types of Sengled smart devices be used simultaneously?
Yes, a single Sengled hub can support up to 64 Sengled smart devices, including smart LED bulbs, smart plugs, smart sensors, smart light switches, etc. For the latest selection, please check out Sengled.com.
Limited Warranty:
3-year limited warranty from original purchase date. Sengled restricts warranty service for a smart home device to the country where Sengled or its authorized retailer originally sold the device. To learn more about the Limited Warranty for Sengled products, please visit www.sengled.com/warranty.
Support:
If you encounter any issues, please reach out to your local Sengled Support
team.
Visit the following website for web support: https://support.sengled.com/
Send emails to:
[email protected] (USA)
[email protected]
(CA)
Dial Customer Support Line
1-877-401-5990
10:00am-8:00 pm CST on Mon-Fri
11:00am-8:00 pm CST on Sat
1503260357/v3.0