LINDY 38107 2 Port DVI-D Dual Link Splitter User Manual
- June 6, 2024
- LINDY
Table of Contents
LINDY 38107 2 Port DVI-D Dual Link Splitter User Manual
© LINDY Group – FOURTH EDITION (January 2021)
Introduction
Thank you for purchasing a splitter from the DVI-D range of products. These devices are high performance DVI-D distribution amplifiers. They allow a DVI-D signal to be split to 2, 4 or 8 DVID enabled displays or projectors for multi- screen presentation.
The DVI-D dual link versions with 2 (38107) and 4 (38104) output ports do not support HDCP signals and should only be used for DVI-D dual link signals with higher resolutions up to 2560×1600.
Package Contents
- DVI-D Splitter
- 5V DC PSU
- This user manual
Features
- Dual link versions support resolutions up to 2560×1600
- Can be cascaded up to 3 layers depending on the cable quality
Specification
- Compliant with DVI 1.0 specification
- Amplified outputs allow cable lengths of up to 15m when using DVI SLD cables
Installation
- Make sure all devices are powered off before making any connections!
- Connect all cables and power supplies to the sources, switches and displays.
- Power on the displays, splitter then the source devices to avoid any connection issues.
NOTE : We recommend you do not use dual link splitters with resolutions of 1920×1200, 1080p60 or below. This may cause signal issues and lack of picture on your displays.
CE/FCC Statement
CE Certification
LINDY declares that this equipment complies with relevant European CE requirements.
UKCA Certification
LINDY declares that this equipment complies with relevant UKCA requirements.
FCC Certification
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
You are cautioned that changes or modification not expressly approved by the party responsible for compliance could void your authority to operate the equipment.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
The enclosed power supply has passed Safety test requirements, conforming to the US American versions of the international Standard IEC 60950-1 or 60065 or 62368-1.
Hersteller / Manufacturer (EU):
LINDY-Elektronik GmbH
Markircher Str. 20
68229 Mannheim
Germany
Email: info@lindy.com , T: +49 (0)621 470050
Manufacturer (UK):
LINDY Electronics Ltd
Sadler Forster Way
Stockton-on-Tees, TS17 9JY
England
sales@lindy.co.uk, T: +44 (0)1642 754000
Recycling Information
WEEE (Waste of Electrical and Electronic Equipment), Recycling of Electronic Products
Europe, United Kingdom
In 2006 the European Union introduced regulations (WEEE) for the collection and recycling of all waste electrical and electronic equipment. It is no longer allowable to simply throw away electrical and electronic equipment. Instead, these products must enter the recycling process.
Each individual EU member state has implemented the WEEE regulations into national law in slightly different ways. Please follow your national law when you want to dispose of any electrical or electronic products. More details can be obtained from your national WEEE recycling agency.
No. 38104, 38107
4th Edition, January 2021
lindy.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>