LINDY 70436 2/4 Port Auto Optical Audio Switch User Manual
- June 6, 2024
- LINDY
Table of Contents
LINDY 70436 2/4 Port Auto Optical Audio Switch User Manual
Introduction
Thank you for purchasing the Lindy 2 or 4 port automatic optical audio switch. This product has been designed to provide trouble free, reliable operation. It benefits from both a LINDY 2-year warranty and free lifetime technical support. To ensure correct use, please read this manual carefully and retain it for future reference.
Package Contents
- 2 or 4 Port Auto Optical Audio Switch
- USB A to DC Cable, Barrel Size: 5.5/2.1mm
- Lindy Manual
Features
- Provides a first come, first served auto switching function between active sources
- Switch for easy selection from auto or manual
Specification
-
Input ports: 2 or 4 x TosLink (Optical Fibre)
-
Output port: 1 x TosLink (Optical Fibre)
-
Supports S/PDIF standard of digital audio transmission for uncompressed PCM/LPCM and bitstream
Dolby AC-3, Dolby 5.1, Dolby Digital, DTS and ADAT -
Sampling rate: 32 ~ 96kHz
-
Power Requirements: 5VDC 1.2A
-
Housing: Plastic
-
Colour: Black
Operation
Please ensure all devices are switched off before making any connections. We recommend switching on your Audio switch, then your source audio devices then your output audio device, in this order.
Auto LED: This will be lit when the switch is in Auto mode
Select button: This will allow you to toggle between the input ports or select Auto mode
Input LED’s: These will be lit when the switch detects and active input signal
CE/FCC Statement
CE Certification
LINDY declares that this equipment complies with relevant European CE requirements.
UKCA Certification
LINDY declares that this equipment complies with relevant UKCA requirements.
FCC Certification
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
You are cautioned that changes or modification not expressly approved by the party responsible for compliance could void your authority to operate the equipment. This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Responsible Importer UK:
LINDY Electronics Ltd
Sadler Forster Way
Stockton-on-Tees, TS17 9JY England
sales@lindy.co.uk,
Tel: +44 (0)1642 754000
Recycling Information
WEEE (Waste of Electrical and Electronic Equipment), Recycling of Electronic Products.
Europe, United Kingdom
In 2006 the European Union introduced regulations (WEEE) for the collection and recycling of all waste electrical and electronic equipment. It is no longer allowable to simply throw away electrical and electronic equipment. Instead, these products must enter the recycling process.
Each individual EU member state has implemented the WEEE regulations into national law in slightly different ways.
Please follow your national law when you want to dispose of any electrical or electronic products. More details can be obtained from your national WEEE recycling agency.
Tested to Comply with FCC Standards
For Home and Office Use!
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>