LINDY 38425 2 Port DisplayPort MST/SST Hub User Manual
- June 6, 2024
- LINDY
Table of Contents
2 Port DisplayPort MST/SST Hub
User Manual
No. 38425
lindy.com
© LINDY Group SECOND EDITION (January 2021)
Introduction
Thank you for purchasing the 2 Port DisplayPort MST/SST Hub. This product has been designed to provide trouble free, reliable operation. It benefits from both a LINDY 2 year warranty and free lifetime technical support. To ensure correct use, please read this manual carefully and retain it for future reference.
The DisplayPort MST/SST Hub has been designed to utilise the Multi-Stream capabilities of the DisplayPort interface, allowing two DisplayPort monitors to be directly connected to a single DisplayPort interface on a PC or Notebook. The MST Hub helps overcome the limitation of many modern computers which offer only a single video output, allowing multiple displays to be connected without the need for purchasing an additional graphics card. With support for two, uncompressed, independent displays with resolutions up to 4K the MST hub is perfect for professionals requiring multiple workspaces to aide their productivity. The SST function of this product allows you to display a single DisplayPort signal on two screens or projectors in the same was as a splitter works.
Package Contents
- 2 Port DisplayPort MST/SST Hub
- Multi Country Power Supply
- User Manual
Specification
- Input Ports: DisplayPort Female
- Output Ports: 2 x DisplayPort Female
- Supports resolutions up to 3840×2160@60Hz
- DisplayPort 1.2 with MST/SST & HBR2 support
- Supports audio over DisplayPort: 192kHz, up to 7.1 channel
- Supported OS: Windows 7/8/8.1/10 (64 bit)
Installation
Make sure all devices are switched off before making any connections. Once all
connections have been made, power on your monitors first, then your source
device. It may be necessary to adjust your Windows display settings if any of
the monitors are not detected. Once the displays have been detected the
monitors should work as if they were connected directly to a video card. MST
has a maximum bandwidth of 21.6 Gbps; higher resolutions can restrict the
available bandwidth. Exceeding 100% will prevent some monitors from displaying
a picture. Please see below for average resolution bandwidths.
1920×1080@60Hz 22%
1920×1200@60Hz 30%
2560×1440@60Hz 35%
2560×1600@60Hz 28%
3840×2160@30Hz 38%
Troubleshooting
Note: MST is currently not supported by Mac OS X or Chrome OS. MST is certified for use with Microsoft Windows 10, 8/8.1 and 7 devices.
CE/FCC Statement
CE Certification
LINDY declares that this equipment complies with relevant European CE
requirements.
CE Konformitätserklärung
LINDY erklärt, dass dieses Equipment den europäischen CE-Anforderungen
entspricht
UKCA Certification
LINDY declares that this equipment complies with relevant UKCA requirements.
FCC Certification
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
You are cautioned that changes or modification not expressly approved by the
party responsible for compliance could void your authority to operate the
equipment.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference
that may cause undesired operation.
The enclosed power supply has passed Safety test requirements, conforming to
the US American versions of the international Standard IEC 60950-1 or 60065 or
62368-1.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>