LINDY 38480 Fibre Optic Hybrid Mini DisplayPort 1.4 Cable User Manual
- June 6, 2024
- LINDY
Table of Contents
Fibre Optic Hybrid Mini DisplayPort 1.4 Cable with Detachable DisplayPort
Connectors
User Manual English
No. 38480-6
lindy.com
© LINDY Group THIRD EDITION (January 2021)
Introduction
Thank you for purchasing the Fibre Optic Hybrid Mini DisplayPort 1.4 Cable with Detachable DisplayPort Connectors. This product has been designed to provide trouble free, reliable operation. It benefits from both a LINDY 2-year warranty and free lifetime technical support. To ensure correct use, please read this manual carefully and retain it for future reference. Lindy’s range of Fibre Optic Hybrid Mini DP 1.4 Cable with detachable connectors are the professional solution for extending both Mini DisplayPort and DisplayPort signals over longer distances, with no requirement for additional adapters. Combining the flexibility and high EMI & RFI resistance of fibre optic cable with standard copper cabling, these hybrid cables are ideal for use in critical AV setups or commercial installations. Supplied as a thin cable with a premium metal, narrow Mini DisplayPort connector, this can be installed easily through conduit and other narrow spaces with no damage caused to the internal cable structure, while the detachable DisplayPort connector can be added at the ends of the installation for connection to an even wider variety of displays and devices such as PCs or digital signage.
Package Contents
- Mini DisplayPort Fibre Optic Hybrid Cable
- 2 x Mini DisplayPort to DisplayPort Connectors
- This manual
Features
- Mini DP cable with Detachable DP Connectors
- Supports mDP/DP resolutions up to 3840×2160@120Hz 4:4:4 8bit or 8K@60Hz 4:4:4 8bit
- Reduced EMI and RFI
- Supports HDCP 2.2
Specification
- Power Requirements (only required if source device cannot provide sufficient power): 5V
- Operating Temperature: 0°C – 50°C (32°F – 122°F)
- Storage Temperature: -20°C – 85°C (-4°F – 185°F)
- Humidity: 5 85% RH (non-condensing)
- Cable Type: Fibre Optic Hybrid (4 x 850nm MM Fibre & 8 x Copper Wire)
- Jacket Diameter: 4.8mm (0.19in) Jacket Material: PVC
- Colour: Black
- Power Consumption: 0.5W at each side of the installation
CE/FCC Statement
CE Certification
LINDY declares that this equipment complies with relevant European CE
requirements.
UKCA Certification
LINDY declares that this equipment complies with relevant UKCA requirements.
FCC Certification
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
You are cautioned that changes or modification not expressly approved by the
party responsible for compliance could void your authority to operate the
equipment.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference
that may cause undesired operation.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>