LINDY 38413 40m DisplayPort 1.2 Repeater User Manual
- June 6, 2024
- LINDY
Table of Contents
40m DisplayPort 1.2 Repeater
User Manual
Safety Instructions
! WARNING !
Please read the following safety information carefully and always keep this
document with the product.
Failure to follow these precautions can result in serious injuries or death
from electric shock, fire, or damage to the product.
Touching the internal components or a damaged cable may cause electric shock,
which may result in death.
This device is a switching type power supply and can work with supply voltages
in the range 100 – 240 VAC For worldwide usability four different AC adapters
are enclosed: Euro type, UK type, US/Japan type, and Australia/New Zealand
type. Use the appropriate AC adapter as shown in the picture and ensure it is
firmly secured in place and does not detach by pulling before installing it
into a power socket.
To reduce risk of fire, electric shocks, or damage:
- Do not open the product nor its power supply. There are no user-serviceable parts inside.
- Only qualified servicing personnel may carry out any repairs or maintenance.
- Never use damaged cables.
- Do not expose the product to water or places of moisture.
- Do not use this product outdoors it is intended for indoor use only.
- Do not place the product near direct heat sources. Always place it in a well-ventilated place.
- Do not place heavy items on the product or the cables.
- Please ensure any adapters are firmly secured and locked in place before inserting into a wall socket
**Introduction
**
Thank you for purchasing the 40m DisplayPort 1.2 Repeater. This product has been designed to provide trouble-free, reliable operation. It benefits from both a LINDY 2-year warranty and free lifetime technical support. To ensure correct use, please read this manual carefully and retain it for future reference.
Features
- Extends DisplayPort signals up to 40m / 130feet
- Supports DisplayPort 1.2 DP++ (Dual Mode), resolutions up to 3840 x 2160 (4K@60Hz) / 2560×1600@60Hz (1600p)
- Supports DPCP (DisplayPort Copy Protection), MST, RBR, HBR & HBR2
- Support for DP++ / Dual Mode adapters to HDMI/DVI/VGA and mini-DP
- Suitable for use with a computer, video wall, and presentation equipment
- Recommended for use with two LINDY GOLD or SLD cables (not included)
Package Contents
- LINDY DisplayPort 1.2 DP++ Repeater
- Multi-Country Power Adapter (5VDC)
- This User Manual
**Pre-Installation Remarks
**
To reach the maximum lengths stated it is required that you use high-quality
LINDY GOLD cables. For LINDY Super Long Distance (SLD) cables the maximum
length may be slightly reduced. Do not use standard cables.
Resolutions & maximum cable lengths:
4K@60Hz: up to 10m (5m in / 5m out) with LINDY GOLD cables
4K@30Hz: up to 35m (15m in / 20m out) with LINDY GOLD cables
2560×1600@60Hz: up to 40m (20m in / 20m out) with LINDY GOLD cables
Installation
- Plug the supplied power supply to the Repeater and to a corresponding wall socket
- Connect a DisplayPort cable to the source DisplayPort socket on your computer and to the input of the Repeater (marked “Input”)
- Plug the second DisplayPort cable to the output (marked with “Output”) of the Repeater and to the input of the Display.
Troubleshooting tip: If you are experiencing video problems whilst using two different cable lengths, please try switching the order in which the cables are installed and then restart your computer.
CE/FCC Statement
CE Certification
LINDY declares that this equipment complies with relevant European CE
requirements.
FCC Certification
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
You are cautioned that changes or modifications not expressly approved by the
party responsible for compliance could void your authority to operate the
equipment.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
The enclosed power supply has passed Safety test requirements, conforming to the US American versions of the International Standard IEC 60950-1 or 60065 or 62368-1.
Hersteller / Manufacturer (EU):
LINDY-Elektronik GmbH
Markircher Str. 20
68229 Mannheim
Germany
Email: info@lindy.com , T: +49 (0)621 470050
Manufacturer (UK):
LINDY Electronics Ltd
Sadler Forster Way
Stockton-on-Tees, TS17 9JY
England
sales@lindy.co.uk, T: +44 (0)1642 754000
Recycling Information
WEEE (Waste of Electrical and Electronic Equipment), Recycling of Electronic
Products
Europe, United Kingdom
In 2006 the European Union introduced regulations (WEEE) for the collection
and recycling of all waste electrical and electronic equipment. It is no
longer allowable to simply throw away electrical and electronic equipment.
Instead, these products must enter the recycling process.
Each individual EU member state has implemented the WEEE regulations into
national law in slightly different ways. Please follow your national law when
you want to dispose of any electrical or electronic products. More details can
be obtained from your national WEEE recycling agency.
Tested to comply with
FCC Standards
For Home and Office Use!
No. 38413
6th Edition, January 2021
lindy.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>