LINDY 43285 USB 3.1 Gen 2 M.2 SSD Enclosure User Manual

: June 6, 2024
: LINDY

Table of Contents

Introduction
Package contents
Specification
Installation
CE Certification
FCC Warning
WEEE (Waste of Electrical and Electronic Equipment),
Documents / Resources

USB 3.1 Gen 2 M.2 SSD
Enclosure
User Manual
LINDY 43285 USB 3.1 Gen 2 M.2 SSD Enclosure

Introduction

Thank you for purchasing the USB 3.1 Gen 2 M.2 SSD Enclosure This product has been designed to provide trouble-free, reliable operation. It benefits from both a LINDY 2 year warranty and free lifetime technical support. To ensure correct use, please read this manual carefully and retain it for future reference.

Package contents

Enclosure for M.2 SSD
USB 3.1 Gen 2 Type C to C cable, approx. 30cm
Small screwdriver, screw & nut

Specification

USB 3.1 Gen 2 (10 Gbps) standard
For SATA based M.2 SSDs
Supports 30mm (2230), 42mm (2242), 60mm (2260), and 80mm (2280) M.2 NGFF form factors with B key
Chipset: ASM235CM
Supports SATA 1.5 / 3 / 6Gbps M.2 SSDs
UASP support
Durable aluminum casing
Plug and Play, USB Bus powered
Operating temperature: 0°C – 60°C (32°F – 140°F)
Storage temperature: -10°C – 85°C (14°F – 185°F)
Humidity: 20 – 75% RH (non-condensing)

Installation

Remove the two screws on the connector side of the enclosure. Slide-out the drive tray by gently tapping the connector face of the enclosure. The drive bay has a screw pre-installed for full-length drives. Remove the screw, insert a drive into the M.2 connector and secure it in place with the screw.
Slide the drive back into the enclosure, secure the connector panel with the two screws originally removed.
Apply the plastic adhesive cover to the enclosure. If you intend to regularly change the drive installed, then it is recommended not to install the plastic adhesive cover.
Connect the included USB 3.1 Gen 2 Type C to C cable to your computer and to the USB 3.1 M.2 SSD Enclosure.
The operating system will install necessary drivers automatically and the USB 3.1 Type C M.2 SSD Enclosure is now ready for use.

CE Certification

This equipment complies with the requirements relating to electromagnetic compatibility. It has been manufactured under the scope of RoHS compliance.

FCC Warning

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired

WEEE (Waste of Electrical and Electronic Equipment),

Recycling of Electronic Products

Europe, United Kingdom
In 2006 the European Union introduced regulations (WEEE) for the collection and recycling of all waste electrical and electronic equipment. It is no longer allowable to simply throw away electrical and electronic equipment. Instead, these products must enter the recycling process.
Each individual EU member state has implemented the WEEE regulations into national law in slightly different ways. Please follow your national law when you want to dispose of any electrical or electronic products. More details can be obtained from your national WEEE recycling agency.

Hersteller / Manufacturer (EU):
LINDY-Elektronik GmbH
Markircher Str. 20
68229 Mannheim Germany
Email: info@lindy.com ,
T: +49 (0)621 470050
LINDY Electronics Ltd.
Sadler Forster Way
Stockton-on-Tees, TS17 9JY
England
postmaster@lindy.co.uk
T: +44 (0) 1642 754000

Tested to comply with FCC Standards
For Home and Office Use!

No. 43285