Bonsaii PJ8005 Movie Projector Outdoor User Manual
- June 6, 2024
- Bonsaii
Table of Contents
Bonsaii PJ8005 Movie Projector Outdoor User Manual
Product view & Functions
Power button: Press this button to shut on or off the device.
Volume plus and minus button: Press the two buttons to increase or decrease volume. They can also be used in the menu as selection and parameter adjustment.
Menu: Bring up the main menu or exit system.
Signal source: Select the signal or an external video signal. It is also usable as “play” button.
Lens: Rotate the lens to adjust the image.
Air outlet: Do not cover the air cooling openings during operation to avoid burns.
Remote Control Instructions
- Power on/off: turn the machine on/off.
- Return: return to the last status when playing media or Menu Setting.
- Signal Source: short press to access the signal source selection page.
- Menu: show menu settings on the projection screen.
- Up / Down button: Menu selection page : it can select an item or adjust the value in the Menu. When playing a video : it can select the last or next file.
- Left / Right button: Menu selection page : it can select an item or adjust the value in the Menu. When playing a video : move forward or backward
- OK: confirm (double click ok for channel switching)
- Volume +
- Volume –
- Mute
- Power on / off
- Return
- OK
- Left / Right button
- Down / Next Movie
- Volume
- Signal Source
- Menu
- Up / Down button
- Right / forv
- Volume+
- Mute
-
Multimedia boot screen
When the projector starts working, the screen displays takes about 10 seconds to come into the multimedia screen. -
Focus & Keystone
Sometimes, the image projected on the wall looks like a trapeze rather than a square, causing distortion that needs to be avoided.
You can adjust it with the keystone adjustment wheel (3) → see following picture. -
Image focus
Put the device vertical to the projector screen or white wall. Adjust the focus with the focus adjustment wheel (2) until the image is clear enough. Then the focus is finished. During the focusing, you could display video or display the menu to check the adjustment → see following picture.
The device provides optical keystone function, so you could turn the keystone to adjust the image. The device does not have horizontal keystone correction function.
Multimedia connection
VGA input socket: the port can be connected to a computer or other VGA video signal output socket. Refer to the following
NOTE: The device and connection of laptop may not be able to display images at the same time, if that happens, set the computer display attributes, select for CRT output mode.
Video input socket: from now on the interface can be connected to the LD player, DVD players, video cameras and video player (VIDEO) or audio output socket.
Audio output: Audio signal from the output port of the device, if you want to high power play music input end connected to external power amplifier.
HDMI signal input: this interface can be used with HD players. You have to connect the supplied HDMI cable from your player to the device.
Operation
Input source selection
→ Selecting an input signal from the device: (Check that the correct signal cable is connected).
→→ Press the S button on the device or the SOURCE button on the remote control to display the right interface.
→→→ Confirm whether correctly connected to the signal cable press buttons on the device or on the remote control to select the following input PC, AV, HDMI, SD/USB (DMP). Choose your needed input signal with the OK button.
Technical specifications
