FODSPORTS FX8PRO Motorcycle Helmet Intercom Bluetooth Headset User Guide

FX8PRO Motorcycle Helmet Intercom Bluetooth Headset
User Guide

FX8PRO Motorcycle Helmet Intercom Bluetooth Headset

Basic Function

Pair Device (Mobile phone)

NOTE:

1. First time power on, default: FX8 PRO enters pairing mode.
2. Power on after resetting Bluetooth pairing record, default: FX8 PRO enters pairing mode.

Mobile Phone

Music

Music Sharing

|
---|---

Intercom

Quick Pairing Method

Ambient mode

Background sound function

Reset Bluetooth Pairing Record

Charging

FM Radio

|
---|---

Website

|
---|---

[https://community.fodsports.com/support/fx8-pro-user-manual/](https://community.fodsports.com/support/fx8-pro-user-manual/https://community.fodsports.com/support/fx8-pro-user-manual/)


[https://community.fodsports.com/support/fx8-pro-user-manual/](https://community.fodsports.com/support/fx8-pro-user-manual/https://community.fodsports.com/support/fx8-pro-user-manual/)

|

<http://www.fodsportsclub.com>  

|

[http://www.youtube.com/channel/UCVIl0DNey8MN4sz7UtVt56g](https://www.youtube.com/channel/UCVIl0DNey8MN4sz7UtVt56g)

|

<https://www.facebook.com/Fodsports/>  

NOTE: In addition, you can also contact from the following email address. contact information: [email protected]

Technical Specifications

1. Bluetooth 5.2 Support: HSP,HFP,A2DP,AVRCP
2. Battery Total Capacity: lithium battery, 900mAh /3.7v
3. Dimensions: 89mm 45mm 28mm
4. Intercom users: 8 riders
5. Working time: 20 hours
6. Standby time: 300 hours
7. Charging time: 2-3 hours
8. Weight: 50g ; 100g (Include Headphone & Mic Kits)
9. Frequency Range: 2402-2480MHz
10. Operating temperature: -20 C— 50 C
11. Certification: CE FCC ROHS BQB TELEC
12. USB Adapter standard charge voltage: DC 5V±0.2V
13. USB Adapter standard charge circuit: DC 1A— 2A

The FX8 PRO operates in the following order of priority

1. Phone call (highest)
2. Intercom
3. Music
4. FM Radio

Package Include

FCC Caution
This device complies with pad 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause handful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to pat 15 of the FCC Rules. These limits are designed to provide reasonable protection against handful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Clamp Installation

Installation

https://www.fodsports.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>