bonsaii 3S16 Cross Cut Shredder Instruction Manual
- June 9, 2024
- Bonsaii
Table of Contents
bonsaii 3S16 Cross Cut Shredder
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ
AND KEEP IT FOR FUTURE REFERENCE.
Please give us a chance to make it right and do better! Contact our friendly
customer service department for help first. Replacements for missing or
damaged parts will be shipped.
Customer Service:
IMPORTANT!
- Please read all instructions carefully and retain instructions for future reference.
- Read through each step carefully and follow the proper order.
- Please place this machine on a flat and stable surface place, please be careful and don’t tip the machine over .
- In case the machine is broken and cannot be used as normal. 4. The device should be set up as close as possible to an easily accessible wall socket. 5. Dangerous, please do not disassemble, modify or repair the machine in any way on your own.
- To avoid electric shock, hurting or accidental injury. 6. When you empty the basket, or move the machine, or no need to use the machine for a certain period of time ,Please kindly make the machine under OFF status and unplug.
- To avoid fire accident or electric shock. 7. Please don’t use inflammable liquids, gases, water and cleaner to clean the machine.
- To avoid fire accident or electric shock.
8. Please don’t use the machine in a very high temperature, very humidity and very heavy dust environment .
*To avoid fire accident, electric shock or machine malfunction 9. Please do not put adhesive tape, carbon paper, fabric, plastic film, etc. into the machine for shredding. - To avoid damaging the machine 10. Please do not damage or process the power cables, or do not place heavy objects on the cables.
- To avoid fire accident or, hurting or electric shock 11. If abnormal conditions such as smoke or odor occurred, please disconnect the power and stop using it immediately.
- To avoid fire accident or electric shock 12. Please do not use if the shredder or the power cable is damaged or defective
- To avoid fire accident or electric shock
IMPORTANT SAFETY INTRODUCTIONS BEFORE FIRST USE
- Please kindly let children and pets keep away from the machine.
- There are sharp blades inside the machine so as to avoid injury.
- Please kindly let your hands keep away from the sharp blades and feeding opening of paper shredder.
- There are sharp blades inside the machine so as to avoid injury.
- Please kindly let your hair keeps away from the feeding opening of paper shredder.
- If your hair is accidentally sucked in, Please kindly use the “Reverse function” and get rid of the danger.
- Please kindly let your clothing or some small items keep away from the feeding opening of paper shredder like tie, necklace, sleeves, jewelry, etc ..
- Please don’t use inflammable liquids, gases water and cleaner to clean the machine.
- To avoid fire accident.
- Please kindly don’t touch the sharp edges to avoid injury .
- This equipment is not intended for use by children.Avoid touching the media feed opening with the hands,clothing or hair. Unplug this equipment when not in use for an extended period of time, Hazardous moving part is in this equipment, keep body parts away from moving parts.
- It cannot be over shredder’s shredding capacity on shredder’s icon.
KNOW YOUR SHREDDER
For safety reasons, shredder will operate only if the shredder head is in correct position and used with supplied basket.
- Power switch (“-“=on,”O”= OFF)
- Power button( work status in blue light, basket opened in red light with flashing , standby status in red light with slowly flashing)
- Forward button ( Compulsorly work)
- Reverse button (Release the paper)
- Overload indicator light ( red with flashing)
- Overheat indicator light ( red with flashing) (J) Feed opening ( credit card , clip, staple,paper) @ CD Feed opening
- CD basket
- Shredder basket
- Basket handle
- Casters
TECHNICAL SPECIFICATIONS
MODEL 3S16
Voltage
| ****
120VAC, 60Hz
| Feed Opening (L.W)| 220x5mm
8.66x 0.2 Inches
---|---|---|---
CD/Feeding Opening Capacity
| 14 sheets/time(A4 75g/m2) one sheet of CD/time
one sheet of credit card/time
| ****
CD Feed Opening (L.W)
| ****
125x3mm 4.92×0.12 Inches
Basket Type| Pull out| Shred Type| Cross-Cut
Basket Capacity
| ****
4.2 Gallons
| ****
Shred Paper Size
| ****
4x35mm(0.16×1.38Inches)
Product Size (L · w •H)
| ****
345 x 251 x 508 mm
13.58 x 9.88 x 20 Inches
| ****
CD basket capacity
| ****
0.37 Gallons
Continuous operation
| ****
;,, 60 minutes
| ****
Cool down
| ****
s;10 minutes
MODEL 3S23
Voltage
| ****
120VAC, 60Hz
| Feed Opening (.L W)| 220x5mm
8.66x 0.2 Inches
---|---|---|---
CD/Feeding Opening Capacity
| 16 sheets/time(A4 75g /m2)
one sheet of CD/time
one sheet of credit card/time
| ****
CD Feed Opening (.L W)
| ****
125x3mm 4.92×0.12 Inches
Basket Type| Pull out| Shred Type| Cross-Cut
Basket Capacity
| ****
6 Gallons
| ****
Shred Paper Size
| ****
4x35mm(0.16×1.38Inches)
Product Size (L•w•H)
| ****
367x275x567mm 14.44×11.14×22.36 Inches
| ****
CD basket capacity
| ****
0.37 Gallons
Continuous operation
| ****
;a,60 minutes
| ****
Cool down
| ****
s;10 minutes
MODEL 3S30
Voltage
| ****
120VAC, 60Hz
| Feed Opening (L•W)| 220x5mm 8.66×0.2Inches
---|---|---|---
CD/Feeding Opening Capacity
| 20 sheets/time(A4 75g/m2) one sheet of CD/time
one sheet of credit card/time
| ****
CD Feed Opening (L’W)
| ****
125x3mm 4.92×0.12 Inches
Basket Type
| ****
Pull out
| ****
Shred Type
| Cross-Cut
Basket Capacity
| ****
8 Gallons
| ****
Shred Paper Size
| ****
4x35mm(0.16×1 .38Inches)
Product Size (L•w •H)
| ****
410x320x625mm 16.14×12.60×24.61 Inches
| ****
CD basket capacity
| ****
0.37 Gallons
Continuous operation
| ****
;,, 120 minutes
| ****
Cool down
| ****
,; 10 minutes
OPERATING INSTRUCTIONS
-
Plug in and press the power switch to ” – “.
-
When in red light with slowly flashing becomes blue light , It can feed credit card ,clip, staple or paper to shred .( Shredding CD in CD feed opening)
-
Basket opened: in red light with flashing , the shredder cannot shred at that time ,need to close the basket and © power button becomes blue light .
-
When finished shredding or no need to use , please kindly press or press ” power switch” to ” O” .
-
Jam: Overload indicator light in red with flashing and © power button in blue light, press ” /\ button” to take out the jammed paper . The shred will be automatically cleared the paper scraps on shredder’s blades
-
Overload: Overload indicator light in red with flashing and in blue light, need to take out the excess paper .
-
Overheat: Overheat indicator light in red with flashing and in blue light, the shredder doesn’t work and need to await cooling down.
PRODUCT MAINTENANCE
-
Plug in and press the power switch ” – “.
-
When in red light with slowly flashing becomes blue light , Please kindly feed one shredder lubricant pack to shred.
-
Press “/\ button” for 2-3 seconds staying ( don’t pull out the shredder lubricant pack)
-
Press ” V button “2-3 seconds staying.
-
Repeat the operations from ” /\ ” to ” V ” for 3-5 times till the shredder lubricant pack is fully shredded.
-
When finished shredding, please press or “power switch” to “O”.
CAUTION: * Only use the professional shredder Lubricant pack to maintain the shredder such as Bonsaii shredder Lubricant 24-Pack ( LS24 )/12-Pack ( LS12).(no cleaner ,inflammable liquids ,gases oil etc.
TROUBLESHOOTING
Malfunction
| ****
Reason
| ****
Solution
---|---|---
Stop Working
| ****
The power plug doesn’t connect to the power supply.
| ****
Please kindly check whether you use the machine with related supply voltage or Plug in again correctly.
Power supply voltage is too low or no power supply.| Please kindly find a
related supply voltage to use it .
The machine is under overheating protection, because the machine is over the
continues working capacity.| ****
Wait for the machine to cool down naturally.
The thickness of paper is too thin.
| ****
To make the paper thicker ,You can add more papers or fold the paper.
The machine is overloading, because the paper is over machine Max shredding quantities.
| ****
Reduce paper quantity with an acceptable amount and place the paper into the feeding opening of shredder again.
Damage of power cable.
| ****
Please replace the power cable with the same parameters by professional person or contact with our
customer service.
The basket is full.| Empty the basket.
Defective of machine.
| Please kindly contact with our customer service.
Jam
| ****
Paper jam.
| Please kindly use the function of “Reverse” to take out the excess paper.
Keep Running
| ****
Paper dust and other foreign objects cover the sensor.
The location of sensor is in the shredder’s feeding opening look like glass beads or marbles.
| 1. Please unplug first and use soft cloth
or cotton swab to clean the foreign objects without any cleaner or water .
2. lf there are some paper scraps around the sensor area ,please kindly use cotton swab or needle nosed pliers to take out the paper scraps .
:please don’t overexert and use Sharp tools to clean or poke the sensor to avoid damaging the sensor.
Loud Noise| ****
The shredder is placed on an unsuitable place.
| ****
Change the location.
If the above answers can not solve your problems, please kindly contact with our customer service team via email customer-care@bonsaii.com
LIMITED WARRANTY
- We stand by our product and offer a 30-day money-back guarantee. During this time, you could return the item without paying any extra fee if there is a manufacturing defect in it. Please rest assured that the returns are free and easy if there is a manufacturing defect.
- Otherwise, it would be the customer’s responsibility to cover the shipping fee. Products on sale are also returnable.
- If the product isn’t meeting your expectations, please email within 30-days of receipt. We will help you to either return or exchange your product. Your original form of payment will be refunded in full once the full return is complete. After 30-days orders may be subject to a 20% restocking fee and all shipping and handling charges will be the responsibility of the customer. Additional return details are listed below. After 60-days the purchase from Bonsaii is non-refundable.
- If you receive a damaged product, you must notify Bonsaii within 48 hours of delivery. Bonsaii will investigate the claim and notify the freight company about the damage. Please retain all packaging in the event that Bonsaii or the freight company needs to inspect it.
- These investigations may take several days but merchandise replacements will be processed as soon as possible.
- For product arrived defective or damage, We’re sorry to hear that your Bonsaii product arrived in less than perfect condition. We’d like to resolve this issue right away with the help of our Customer Support Team and Quality Assurance team. They’ll need to know a bit of information on your order as well as the issue you’re experiencing with your Bonsaii product. To report your issue, please reach out to our Customer Support team by emailing customer-care@bonsaii.com with your order number. We may need you to make a short video, or take some pictures of the defects of the product and send them to customer-care@bonsaii.com. After a preliminary analysis on the video or pictures, we will send you a brand new replacement right away if it is confirm to be defective on its arrival. If we determine that you have misrepresented Bonsaii product’s condition and that product is not defective, we will send you the right instructions and help you to use the product correctly.
- If you have any questions or any confusions, Please kindly contact with us: customer-care@bonsaii.com.
ABOUT COMPANY
- Manufacture: Bonsen Electronics Limited
- No.11-12, Lun Pin Chong Industrial Zone San Tun
- Community, Hou Jie Town 523941 Dongguan City,
- Guangdong PEOPLE’S REPUBLIC OF CHINA
- 1-844-728-6917
- customer-care@bonsaii.com