bonsaii C169-B 14-Sheet Cross Cut Shredder Instruction Manual
- June 9, 2024
- Bonsaii
Table of Contents
bonsaii C169-B 14-Sheet Cross Cut Shredder
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP IT FOR FUTURE REFERENCE.
Please give us a chance to make it right and do better! Contact our friendly customer service department for help first. Replacements for missing or damaged parts will be shipped.
IMPORTANT!
-
Please read all instructions carefully and retain instructions for future reference.
-
Read through each step carefully and follow the proper order.
-
Please place this machine on a flat and stable surface place, please be careful and don’t tip the machine over.
In case the machine is broken and cannot be used as normal. -
The device should be set up as close as possible to an easily accessible wall socket.
-
Dangerous, please do not disassemble, modify or repair the machine in any way on your own.
To avoid electric shock, hurting or accidental injury. -
When you empty the basket, or move the machine, or no need to use the machine for a certain period of time, Please kindly make the machine under OFF status and unplug.
To avoid fire accident or electric shock. -
Please don’t use inflammable liquids, gases, water and cleaner to clean the machine.
To avoid fire accident or electric shock. -
Please don’t use the machine in a very high temperature, very humidity and very heavy dust environment .
To avoid fire accident, electric shock or machine malfunction -
Please do not put adhesive tape, carbon paper, fabric, plastic film, etc. into the machine for shredding.
To avoid damaging the machine -
Please do not damage or process the power cables, or do not place heavy objects on the cables.
To avoid fire accident or, hurting or electric shock -
If abnormal conditions such as smoke or odor occurred, please disconnect the power and stop using it immediately.
To avoid fire accident or electric shock -
Please do not use if the shredder or the power cable is damaged or defective
To avoid fire accident or electric shock
IMPORTANT SAFETY INTRODUCTIONS BEFORE FIRST USE
User information/safety instructions.
WARNING
- Please kindly let children and pets keep away from the machine.
- There are sharp blades inside the machine so as to avoid injury.
- Please kindly let your hands keep away from the sharp blades and feeding opening of paper shredder.
- There are sharp blades inside the machine so as to avoid injury.
- Please kindly let your hair keeps away from the feeding opening of paper shredder.
- If your hair is accidentally sucked in, Please kindly use the “Reverse function” and get rid of the danger.
- Please kindly let your clothing or some small items keep away from the feeding opening of paper shredder like tie, necklace, sleeves, jewelry, etc ..
- Please don’t use inflammable liquids, gases water and cleaner to clean the machine.
- To avoid fire accident.
- Please kindly don’t touch the sharp edges to avoid injury .
- This equipment is not intended for use by children.Avoid touching the media feed opening with the hands,clothing or hair. Unplug this equipment when not in use for an extended period of time, Hazardous moving part is in this equipment, keep body parts away from moving parts.
- It cannot be over 14 sheets in one time for the quantity of shredding.
KNOW YOUR SHREDDER
- Control Panel (Control shredder’s three status , “AUTO”, “OFF”, “REV”)
- Auto Position (Turn on )
- Rev Position (“Release the paper”)
- Overheat Light (Overheat in red )
- Overload Light (Overload in red)
- Power Light (Auto-on in red)
- Basket
- Feed Opening
- Transparent Window
- OFF Position
- Caster brake
- Shredder’s caster
For safety reasons, shredder will operate only if the shredder head is in correct position and used with supplied basket.
TECHNICAL SPECIFICATIONS
OPERATING INSTRUCTIONS
-
Plug in and move “control panel” from OFF to AUTO position , “Power Light” shows red light.(Feed papers,credit card, CD,clips or staple to shred. )
Continuous operation around 40 minutes
WARNING
Beware of injury caused by CD splashing or incorrect CD shredding. Please wear safety goggles and shred the CD in a correct way.
-
When finished shredding, set to Off .
Jam: Move “control panel” from Auto position to “REV” position, “Power Light’ shows red light and overload light is in red.( pull out the jammed paper)
Move control panel” from “REV” to “AUTO” position for 3-5 seconds staying (repeat the action around 2-3 times if get a very serious jam)
Overheat(Overheat light is in red , need to wait for cooling down)
Cool down around 40 minutes
Overload(Overload light is in red , need to take out excess papers)
PRODUCT MAINTENANCE
- Plug in and move “control panel” from OFF to AUTO position , “Power Light” shows red light .(Feed one shredder Lubricant pack to shred )
- Move “control panel”from Auto to “Reverse” for 2-3 seconds staying (don’t pull out the shredder Lubricant pack)
- Move “control panel” from REV to AUTO to shred the shredder Lubricant pack for 3-5 seconds staying and repeat the actions for 2-3 times till the shredder Lubricant pack is fully shredded.
- When finished shredding, set to Off .
CAUTION
Only use the professional shredder Lubricant pack to maintain the shredder such as Bonsaii shredder Lubricant 24-Pack ( LS24 )/12-Pack ( LS12).(no cleaner , inflammable liquids,gases oil etc… )
TROUBLESHOOTING
If
the above answers can not solve your problems, please kindly contact with our
customer service team via email [email protected]
LIMITED WARRANTY
We stand by our product and offer a 30-day money-back guarantee. During this time,you could return the item without paying any extra fee if there is a manufacturing defect in it. Please rest assured that the returns are free and easy if there is a manufacturing defect. Otherwise, it would be the customer’s responsibility to cover the shipping fee.
Products on sale are also returnable.
If the product isn’t meeting your expectations, please email within 30-days of
receipt.
We will help you to either return or exchange your product. Your original form
of payment will be refunded in full once the full return is complete. After
30-days orders may be subject to a 20% restocking fee and all shipping and
handling charges will be the responsibility of the customer. Additional return
details are listed below. After 60-days the purchase from Bonsaii is non-
refundable.
If you receive a damaged product, you must notify Bonsaii within 48 hours of
delivery.
Bonsaii will investigate the claim and notify the freight company about the
damage.
Please retain all packaging in the event that Bonsaii or the freight company
needs to inspect it. These investigations may take several days but
merchandise replacements will be processed as soon as possible.
For product arrived defective or damage, We’re sorry to hear that your Bonsaii
product arrived in less than perfect condition. We’d like to resolve this
issue right away with the help of our Customer Support Team and Quality
Assurance team. They’ll need to know a bit of information on your order as
well as the issue you’re experiencing with your Bonsaii product. To report
your issue, please reach out to our Customer Support team by emailing
[email protected] with your order number. We may need you to make a
short video, or take some pictures of the defects of the product and send them
to [email protected]. After a preliminary analysis on the video or
pictures, we will send you a brand-new replacement right away if it is
confirmed to be defective on its arrival. If we determine that you have
misrepresented Bonsaii product’s condition and that product is not defective,
we will send you the right instructions and help you to use the product
correctly.
If you have any questions or any confusions, Please kindly contact with us:
[email protected].
Manufacture: Bonsen Electronics Limited
No.11-12, Lun Pin Chong Industrial Zone San Tun
Community, Hou Jie Town 523941 Dongguan City,Guangdong PEOPLE’s REPUBLIC OF
CHINAA
[email protected]
1-844-728-6917
Customer Service:
[email protected]
1-844-728-6917