bonsaii C275-A 12 Sheet Cross Cut Shredder Instruction Manual
- June 9, 2024
- Bonsaii
Table of Contents
bonsaii C275-A 12 Sheet Cross Cut Shredder
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP IT FOR FUTURE REFERENCE.
- Please give us a chance to make it right and do better!
- Contact our friendly customer service department for help first.
- Replacements for missing or damaged parts will be shipped.
TIPS
Thanks for your believing and choosing!
In order to ensure the machine is without any quality issues, We have inspected the machines by 100%. Maybe we have remained some shred papers in the basket or on the blades during the machine test. If it makes you feel uncomfortable or inconvenienced, Please kindly contact with our customer service. We will provide further and better service for you. Thanks!
IMPORTANT
- Please read all instructions carefully and retain instructions for future reference.
- Read through each step carefully and follow the proper order.
- Please place this machine on a flat and stable surface place, please be careful and don’t tip the machine over .
- In case the machine is broken and cannot be used as normal.
- The device should be set up as close as possible to an easily accessible wall socket.
- Dangerous, please do not disassemble, modify or repair the machine in any way on your own.
- To avoid electric shock, hurting or accidental injury.
- When you empty the basket, or move the machine, or no need to use the machine for a certain period of time,Please kindly make the machine under OFF status and unplug.
- To avoid fire accident or electric shock.
- Please don’t use inflammable liquids, gases, water and cleaner to clean the machine.
- To avoid fire accident or electric shock.
- Please don’t use the machine in a very high temperature, very humidity and very heavy dust environment.
- To avoid fire accident, electric shocks or machine malfunction
- Please do not put adhesive tape, carbon paper, fabric, plastic film, etc. into the machine for shredding.
- To avoid damaging the machine
- Please do not damage or process the power cables, or do not place heavy objects on the cables.
- To avoid fire accident or, hurting or electric shock
- If abnormal conditions such as smoke or odor occurred, please disconnect the power and stop using it immediately.
- To avoid fire accident or electric shock
- Please do not use if the shredder or the power cable is damaged or defective
- To avoid fire accidents or electric shock
- Do not shred greeting cards with sound chips or batteries.
- To avoid fire accidents or electric shock.
IMPORTANT SAFETY INTRODUCTIONS
BEFORE FIRST USE
- User information/safety instructions
- WARNING
- Please kindly let children and pets keep away from the machine.
- There are sharp blades inside the machine so as to avoid injury.
- Please kindly let your hands keep away from the sharp blades and feeding opening of paper shredder.
- There are sharp blades inside the machine so as to avoid injury.
- Please kindly let your hair keeps away from the feeding opening of paper shredder.
- If your hair is accidentally sucked in, Please kindly use the “Reverse function” and get rid of the danger
- Please kindly let your clothing or some small items keep away from the feeding opening of paper shredder like tie, necklace, sleeves, jewelry, etc..
- Please don’t use inflammable liquids, gases water and cleaner to clean the machine.
- To avoid fire accident.
- Please kindly don’t touch the sharp edges to avoid injury.
- This equipment is not intended for use by children. Avoid touching the media feed opening with the hands, clothing or hair. Unplug this equipment when not in use for an extended period of time, Hazardous moving part is in this equipment, keep body parts away from moving parts.
- It cannot be over 12 sheets in one time for the quantity of shredding.
- One folded sheet of paper equates to 2 sheets of paper. Heavier paper, humidity or other than rated voltage may reduce capacity. 85% Maximum sheets per pass to avoid jams.
KNOW YOUR SHREDDER
- Control panel (Control shredder’s four status “REV”, OFF”, FWD, “AUTO”)
- Reverse Position (“Release the paper”)
- Auto Position (Turn on)
- Forward (compulsorily work)
- OFF (Turn off)
- Power light (work status in green)
- Indicator light (Overheating in red)
- Paper feed opening
- Basket
- Shredder’s handle
- Transparent Window
For safety reasons, the shredder will operate only if the shredder head is in the correct position and used with supplied basket.
TECHNICAL SPECIFICATIONS
| Voltage | 120VAC, 80Hz |
|---|---|
| Feeding Opening Capacity | 12 sheets.time(A4 75g/m’) One sheet of credit |
| card/time | Feed Opening (L°W) |
8.88 x 0.2 Inches
Shred Type| Cross Cut| Basket Type| Litt off
Basket Capacity| 5.55Gallon| Shred Paper Size| 5 x 20mm
0.2 x 0.78 Inches
Product Size (L-w.H)| 321><201 x4e5mm
12.64×7.91×18.31 Inches.
| Shred Functions| Paper, plastic credit card, staple,clips
Will not shred: Unopened junk mail, adhesive labels, continuous from paper, transparencies, newspaper, cardboard,large paper clips, laminates,file folders, X-rays or plastic other than noted above. Maximum recommended daily usage rates: 30 sheets,2 credit cards.
OPERATING INSTRUCTIONS
- Plug in and move the “control pane” from OFF to AUTO position, “Power Light” in green. (feed papers, clips, staple or credit card to feed opening).
- Continuous operation around 5 minutes.
- When finished shredding or no need to use it, please set it to OFF.
- Jam: Please move “control panel” from “Auto” to “REV” position and pull out the jammed paper.
- Move “control panel” from “REV” to FWD position for 3-5 seconds staying (repeat the operation around 2-3 times if get a very serious jam)
- Overheat (power light is in green and indicator light in red, need to wait for cooling down). Cool down around 40 minutes.
- Max.12 sheets: If it is over the capacities ,please take out the excess papers.
PRODUCT MAINTENANCE
- Plug in and move “control panel” from OFF to AUTO position, “Power Light” shows groon light. (Food one shredder Lubricant pack to shred )
- Move “control panel” from Auto to “REV” position for 2-3 seconds staying and don’t pull out the shredder lubricant pack.
- Move “control panel” from REV to AUTO position to shred the shredder lubricant pack for 3-5 seconds staying and repeat the operation for 2-3 times till the shredder lubricant pack is fully shredded.
- When finished shredding or no need to use it, please set to OFF.
CAUTION: Only use the professional shredder Lubricant pack to maintain the shredder such as Bonsaii shredder Lubricant 24-Pack ( LS24 }/12-Pack (LS12).( no cleaner, inflammable liquids .gases oil etc… )
TROUBLESHOOTING
LIMITED WARRANTY
We stand by our product and offer a 30-day money-back guarantee. During this time, you could return the item without paying any extra fee if there is a manufacturing defect in it. Please rest assured that the returns are free and easy if there is a manufacturing defect. Otherwise, it would be the customer’s responsibility to cover the shipping fee. Products on sale are also returnable.
If the product isn’t meeting your expectations, please email within 30 days of receipt. We will help you to either return or exchange your product. Your original form of payment will be refunded in full once the full return is complete. After 30-days orders may be subject to a 20% restocking fee and all shipping and handling charges will be the responsibility of the customer. Additional return details are listed below. After 60-days the purchase from Bonsaii is non-refundable. If you receive a damaged product, you must notify Bonsaii within 48 hours of delivery. Bonsaii will investigate the claim and notify the freight company about the damage. Please retain all packaging in the event that Bonsaii or the freight company needs to inspect it. These investigations may take several days but merchandise replacements will be processed as soon as possible.
For the product arrived defective or damage, We’re sorry to hear that your Bonsaii product arrived in less than perfect condition. We’d like to resolve this issue right away with the help of our Customer Support Team and Quality Assurance team. They’ll need to know a bit of information on your order as well as the issue you’re experiencing with your Bonsaii product. To report your issue, please reach out to our Customer Support team by emailing [email protected] with your order number. We may need you to make a short video, or take some pictures of the defects of the product and send them to [email protected]. After a preliminary analysis on the video or pictures, we will send you a brand new replacement right away if it is confirm to be defective on its arrival. If we determine that you have misrepresented the Bonsaii product’s condition and that the product is not defective, we will send you the right instructions and help you to use the product correctly.
If you have any questions or any confusion, Please kindly contact us: [email protected].
Manufacture
Bonsen Electronics Limited
- No.11-12, Lun Pin Chong Industrial Zone San Tun Community, Hou Jie Town 523941 Dongguan City, Guangdong PEOPLE’S REPUBLIC OF CHINA
- 1-844-728-6917
- [email protected]
Made in China