bonsaii C233-B Paper Shredder Instruction Manual
- May 15, 2024
- Bonsaii
Table of Contents
bonsaii C233-B Paper Shredder
TIPS:
Thank you for choosing our product! To ensure that the machines are free of
quality issues, we conduct 100% inspections. However, some shred papers may
remain in the basket or on the blades during machine testing. If this causes
any discomfort or inconvenience, please contact our customer service and we
will provide better service for you. Thank you!
IMPORTANT!
- Please read and keep the manual for future reference.
- Carefully read each step and follow the correct sequence of operation.
- Please place the equipment on a flat and stable surface to prevent tipping over, as this may cause the machine to crack or become unusable.
- The device should be placed as close as possible to an accessible wall outlet.
- Do not disassemble, modify or repair the device on your own to avoid electric shock, injury or damage to the machine.
- When you empty the basket, move the device, or do not need to use the device for a period of time, make sure the device is turned off and unplug the power plug to prevent fire or electric shock.
- Do not use flammable liquids, gases, water or cleaners to clean the device to avoid fire or electric shock.
- Do not use the device in a high temperature, high humidity, or heavily dusty environment to prevent fire, electric shock, or machine malfunction.
- Do not put tape, carbon copy paper, fabric, plastic film, etc. into the device for shredding to avoid damage to the machine.
- Do not damage or process the power cord, and do not place heavy objects on the cable to avoid fire, injury or electric shock.
- If smoke or odor occurs during use, immediately turn off the power and stop using it to prevent fire or electric shock.
- Do not use the shredder or power cord if it is damaged or defective to avoid fire or electric shock.
- Do not shred greeting cards with sound chips or batteries to avoid fire or electric shock.
- Where the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable
IMPORTANT SAFETY INTRODUCTIONS BEFORE FIRST USE
- User information/safety instructions.
- WARNING: Please do not allow children to use the machine.
- There are sharp blades inside the machine so as to avoid injury. Please be sure to exercise caution when using it. Please do not put your hand close to the shredder blades and the paper feed opening.
- There are sharp blades inside the machine so as to avoid injury. Please be sure to exercise caution when using it. Please do not let hair near the shredder’s feed opening.
- If your hair is accidentally sucked in, please use the “reverse function” to remove the danger. Please keep your clothing or some small items away from the feed opening of the paper shredder, such as ties, necklaces, sleeves, jewelry, etc. Please don’t use inflammable liquids, gases water and cleaner to clean the machine.
- To avoid fire accident.
- Please kindly don’t touch the sharp edges to avoid injury .
- This equipment is not intended for use by children.Avoid touching the media feed opening with the hands,clothing or hair. Unplug this equipment when not in use for an extended period of time, Hazardous moving part is in this equipment, keep body parts away from moving parts.
- Manual-Feed cannot be over 12 sheets in one time for the quantity of shredding.
- Auto-Feed cannot be over 11 O sheets in one time for the quantity of shredding.
- One folded sheet of paper equates to 2 sheets of paper. Heavier paper, humidity or other than rated voltage may reduce capacity. 85% Maximum sheets per pass to avoid jams.
KNOW YOUR SHREDDER
- Power Switch: OFF/ON
- Auto-feed Supporting plate
- Auto-feed fixed rod
- Auto-feed Connecting plate (top and bottom)
- Auto-feed opening
- Auto-feed cleaning button
- Auto-feed Connecting plate lock
- Manual Feed Opening
- Auto button
- REV Button(“Release the paper”)
- WD button (“Compulsorily work”)
- Hidden Basket handle
- Transparent Window
- Basket
- caster
- Caster brake
For safety reasons, shredder will operate only If the shredder head is In
correct position and used with supplied basket. 
TECHNICAL SPECIFICATIONS
Voltage| ****
120VAC, 60Hz
| Auto-Feed Shred Functions| Paper
---|---|---|---
Auto-feed Shredding Capacity(A4 75g/nf)| ****
110 sheets/time
| Manual-Feed Shred Functions| Paper,plastic credit card, staple, clips
Manual-Feed Shredding
Capacity
| ****
12 sheets/time(A4 20LB) one sheet of credit card/time
| ****
Manual-Feed Opening(L*W)
| ****
8.74×0.14inches (222×3.5mm)
Continuous Shred Capacity by Manual- Feed shredding paper| ****
;;,:1Qmin
| ****
Shred Type
| ****
Micro cut
Continuous Shred Capacity by Auto-feed shredding paper| ****
;;,:30min
| Paper Shred Size (LxW)| 5/32×15/32inches (4x12mm)
Product Size (LxWxH)| 367X263X506(mm)
14.45×10.35×19.92inches
| ****
Cool down time
| :,;;60min
(Naturally cool down)
TIPS : ONE FOLDED SHEET OF PAPER EQUATES TO 2 SHEETS OF PAPER
Heavier paper, humidity or other than rated voltage may reduce shredding
capacity.
OPERATING INSTRUCTIONS
- Plug in and press the power switch to “-“(“O”=0FF ,”-” =ON Auto button in blue light)
- 0pen the Auto-feed Supporting plate and the Auto-feed fixed rod to make the Auto-feed Connecting plate(top and bottom) straight. (when open the Auto-feed Connecting plate under straight status,there will be a voice like a click)
- Make the papers tidily.
- Feed the tidy papers to “Auto-feed opening” or feed the papers to “Manual Feed Opening”.(Auto-feed opening: Max 110 sheets Manual Feed Opening: Max 12 sheets
- When finished shredding or no need to use it ,please press “Auto button” or power switch to”o”. (Auto button light OFF )
BASKET FULL
- Shredder stops to work and need to clean up the paper scraps. (Auto button in blue light with flashing)
- Auto button light will be OFF, when the basket is opened.
- Check that there are no gaps around the shredder body after assembly. Auto button will be in blue light, shredder is under staying working.
AUTO-FEED JAM
-
Pull out the jammed papers and press the REV button. ( Auto button in red and blue light with flashing) Suggest to separate the jam paper to re-feed.
Caution : Re-feed tidy paper to auto-feed, re-feed wrinkle paper to manual-feed shredding. Re-feed wrinkle paper for manual-feed.
-
Open the Auto-feed Connecting plate lock and take out the jammed papers Feed the jam paper scraps into manual-feed to shred
-
Move the Auto-feed cleaning button and make the paper scraps into the basket.
-
Clear the jammed paper scraps and dust on the rubber wheel.
-
After clean up the jammed paper scraps, move the Auto-feed Connecting plate lock and assemble the Auto-feed Connecting plate well, Shredder is under staying working status.(Auto button in blue light)
MANUAL FEED JAM
- Pull out the jammed papers and press the REV button.(Auto button in red light with flashing) Press REV button and FWD button for 3-Sseconds staying, if it gets a very serious jam.
Suggest to separate the jam paper to re-feed shredding in manual-feed.
- When the Auto button is under blue light, Shredder is under staying working status.
OVERLOAD
Auto button is under red and blue light with flashing or red with flashing, It
means the “Auto-feed opening(red and blue light with flashing)” or Manual-Feed
Opening(red with flashing) is over its capacities, need to take out the excess
papers.
*Take out the excess papers and re-feed to shred.
OVERHEAT
“Auto button” is red light and the Shredder stops to work, need to wait for cooling down. After the shredder cools down, the “Auto button” is in blue light, the shredder is under staying working.
PRODUCT MAINTENANCE
- Plug in and feed one shredder lubricant pack to shred in Manual-feed.(Auto button in blue light)
- Press REV button for 2-3 seconds staying .{don’t pull out the shredder lubricant pack)
- Press REV button and FWD button to shred the lubricant pack for 3-5 seconds staying and repeat the operation for 2-3 times till the shredder lubricant pack is fully shredder.
- When finished shredding or no need to use it ,please press “Auto button” or power switch to”o”. (Auto button light OFF )
CAUTION : Only use the professional shredder Lubricant pack to maintain the shredder such as Bonsaii shredder Lubricant 24-Pack (LS24) /12-Pack (LS12) .(no cleaner,inflammable liquids, gases oil etc.
TROUBLESHOOTING
Malfunction
| ****
Reason
| ****
Solution
---|---|---
Stop Working
| ****
1. The power plug doesn’t connect to the power supply.
2. The power switch is not turned on.
| Please kindly check whether you use the machine with related supply voltage or Plug in again correctly, And press the power switch to “-”
(on the back of the machine).
Power supply voltage is too low or no power supply.| Please kindly find a
related supply voltage to use it .
The machine is under overheating protection, because the machine is over the
continues working capacity.| ****
Wait for the machine to cool down naturally.
The paper is uneven or wrinkled.
| Sort out the wrinkled paper and re-feed it into the manual feed port.
The machine is overloading, because the paper is over machine Max shredding quantities.
| Reduce paper quantity with an acceptable amount and place the paper into the feeding opening of shredder again.
Shred staples or paper clips in auto shredding mode.
| ****
Use manual mode to shred paper with staples or paper clips.
The basket is full.| Empty the basket.
Defective of machine.
| Please kindly contact with our customer service.
Jam
| ****
Paper jam.
| Please kindly use the function of “Reverse” to takeout the excess paper.
Keep Running
| ****
Paper dust and other foreign objects cover the sensor.
The location of sensor is in the shredder’s feeding opening look like glass beads or marbles.
| 1. Please unplug first and use soft cloth
or cotton swab to clean the foreign objects without any cleaner or water .
2. If there are some paper scraps around the sensor area ,please kindly use cotton swab or needle nosed pliers to takeout the paper scraps .
:please don’t overexert and use Sharp tools to clean or poke the sensor to avoid damaging the sensor.
Loud Noise| The shredder is placed on an unsuitable place.| ****
Change the location.
If the above answers can not solve your problems, please kindly contact with our customer service team.
LIMITED WARRANTY
Warranty Period: Machines are covered by a 1-year limited warranty and cutters are warranted for 1 years from the date of your original retail purchase from us. The warranty is not transferable to any subsequent purchaser or recipient of the product.
We have great confidence in our products and offer a 30-day money-back guarantee. During this period, if the product has manufacturing defects or fails to meet your expectations, please notify us via email within 30 days of receiving the product. We will assist you in returning or replacing the product. Once the complete return is processed, your original payment method will be refunded in full. After 30 days, a restocking fee of 20% may be charged for the return, and all shipping and handling costs will be borne by the customer. After 60 days, the product is non-refundable.
Further details regarding returns are as follows:
If you receive a damaged product, you must notify us within 48 hours of
receipt. We will investigate the claim and inform the shipping company of the
damage. Please keep all packaging for bonsaii or the shipping company to
inspect if necessary. These investigations may take a few days, but the
replacement of the goods will be processed as soon as possible.
If the product has defects or damages, we are sorry to hear that it did not meet your expectations perfectly. We aim to resolve this issue as quickly as possible with the help of our customer support team and quality assurance team. They will need to know your order information and the issues you have encountered with the product. Please inform us of your concerns by email and provide the order number. We may require you to take a short video or photos of the product’s flaws. After preliminary analysis of the video or images, if it is confirmed that the product has defects, we will immediately send a brand-new replacement product. If we determine that you have misjudged the condition of the product and there are no defects, we will provide you with the correct instructions for use and assist you in using the product correctly. In line with our policy of continuous development we reserve the right to change this product, packing and documentation specification without notice. If you have any questions or any confusions, Please kindly contact with us: customer-care@bonsaii.com.
Manufacture: Bonsen Electronics Limited
Q : No. 11, Lunpinyong Industrial Zone, Houjie Town,
Dongguan City, Guangdong Province, China,
postal code 523941.\
1 -844-728-691 7.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>