Kruger Matz KM0419 Smartwatch User Manual

: October 27, 2023
: Kruger Matz

Table of Contents

SYNCHRONIZATION WITH SMARTPHONE
NAVIGATION
OPERATION
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

KM0419 Smartwatch
User Manual Smartwatch
KM0419

SYNCHRONIZATION WITH SMARTPHONE

Download and install Wearfit app available on Google Play and App Store.
Run the app. Select [Link your health band]* from the welcome screen.
Allow the app to run Bluetooth function and access location.
App will enter search screen. Find your watch (KM0419) on the list of available devices and connect with it. When the connection is successfully established, Bluetooth icon appears on the touch display of your watch.
Allow access to desired notifications.
App is ready to be used.

You can access pairing interface also from the app’s menu (menu icon in the top left corner of the app – [Device Management] – [Connection management]).
Notes:
- The watch does not require constant connection with the smartphone. Data synchronize every time the watch pairs with the app.
- To synchronize data manually, slide your finger from the top to the bottom of the app’s main screen (make sure the devices are connected).
- Data are stored in the watch’s memory for 7 days. Make sure to synchronize data within that period.
- Data on the watch reset every day at midnight.

| Turn on/off| Tap and hold the touch display for about 5 seconds to turn it on. The watch will vibrate. Tap and hold the touch display for about 5 seconds, tap YES, then tap and hold the touch display for another 5 seconds to turn it off. The watch will vibrate.
---|---|---
Browse through functions| Keep tapping the touch display to switch between functions.
Wake touch screen| When the touch display is off, tap and hold it for about 2 seconds to wake it. You can also wake the touch display by the wrist movement. Make sure that wrist activation function has been enabled in the Wearfit app (Device management – Wrist activation). ** When the battery is low, touch screen is off but the hands still show time.

OPERATION

Main screen

Date*
Battery level
Bluetooth connection
Day of the week*

Date and day of the week (touch display) are updated when synchronized with the smartphone.
Message : message icon appears on the touch display when a new message is being received. The watch will vibrate.
Note: Make sure that SMS notification function has been enabled in the Wearfit app (Device management – Intelligent reminders – SMS notification).
Call: call icon appears on the touch display when there is an incoming call. The watch will vibrate.
Note: Make sure that Call alert function has been enabled in the Wearfit app (Device management – Intelligent reminders – Call alert).
Alarm: alarm icon appears on the touch display when the alarm goes off. The watch will vibrate. Set alarm in the Wearfit app (Device management – Intelligent reminders – Alarm clock).
Pedometer: the total number of steps taken during the day. When connected with the app, data recorded by the watch will be send to the Pedometer tab in the app.
Distance covered : distance taken during the day. When connected with the app, data recorded by the watch will be send to the Pedometer tab in the app.
Calories burned : the total number of calories burned during the day. When connected with the app, data recorded by the watch will be send to the Pedometer tab in the app.
Run: records run time, steps number, calories burned and distance covered during the run. When there is on the display, tap and hold the touch display for about 2 seconds to enter run mode. The following screen will display:
Steps number is displayed in the upper part of the touch display, below there is stopwatch. To enable function, tap on the touch display. To pause/resume, tap the touch display. To exit, tap and hold the touch display for about 2 seconds.
You can also enable Run function from the app.
IMPORTANT! This watch is not a medical device. The Hybrid watch and Wearfit app are not supposed to use for diagnosis, treatment, or precaution against disease or illness. If you want to change exercise and sleep habits, make sure to seek medical advice first.
Wear the watch properly to ensure reliable results. It should be worn directly on the skin. Fasten the strap so that it fits tightly but not too tight around the wrist what will prevent the watch from moving during activity. Keep your skin clean and dry.
Keep the sensor area clean.
Attention! If the analogue part of the watch stops working, replace the SR626SW/ AG4 battery.
Heart rate: current heart rate. Measurement lasts for about 30 seconds. The watch will vibrate when the measurement is finished.
Heart rate measurement results are stored in the Heart rate tab in the app.
Blood oxygen: current blood oxygen value. Measurement lasts for about 30 seconds. The watch will vibrate when the measurement is finished.
Blood oxygen measurement results are stored in the Blood oxygen tab in the app.
Blood pressure: current blood pressure. Measurement lasts for about 30 seconds. The watch will vibrate when the measurement is finished.
Blood pressure measurement results are stored in the Blood pressure tab in the app.
Take heart rate, blood oxygen and blood pressure measurements also from the app. Enter appropriate tab and select one of the two options: [Single reading] or [Real-time reading].
There is also [Hourly readings] function in the app. When enabled, the watch will automatically take health measurements every hour with the results saved in the app. You can also measure fatigue level from the app.
To take a measurement of all health parameters at once, enter the app, select [Readings] from the upper right corner of the app screen then tap [One-key reading].
Sleep monitor : display sleep duration. Sleep statistics are stored in the Sleep tab in the app.
Stopwatch: tap and hold the touch display for about 3 seconds to start stopwatch. To pause/resume, tap the touch display. To reset the stopwatch, tap and hold the touch display for about 3 seconds.
Device model and serial number
LEARN MORE
For more information on this product, go to www.krugermatz.com.
Visit www.krugermatz.com website for more products and accessories.
In case of any doubts or questions reach out to our Frequently Asked Questions section.
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or Its literature, indicates that It should not be disposed with other household wastes at the end of its working life. To prevent possible harm lo the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract
This product should not be mixed with other commercial wastes for disposal.