Kruger Matz KM0232-SA 32 Inch Smart TV Owner’s Manual

June 1, 2024
Kruger Matz

Kruger Matz KM0232-SA 32 Inch Smart TV

IMPORTANT SAFETY INFORMATION

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). THERE ARE NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL.

  • This symbol indicates the presence of non-insulated, dangerous voltage.
  • This symbol indicates important operating and maintenance.
  • This symbol indicates that this equipment is a Class II or double-insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth.
  1. Read this manual carefully and keep it for future reference.
  2. Pay special attention to warnings marked with symbols presented above and make sure to follow the information presented next to them.
  3. Do not use this device near water or other sources of moisture.
  4. Do not block any ventilation openings. Install this device according to this manual.
  5. Do not install this device near heat sources such as radiators, stoves or other appliances that produce heat.
  6. If the provided plug does not fit into your outlet, do not try to force it and consult an electrician for further advice.
  7. Protect the power cord from being walked on or pinched, especially near plugs.
  8. Only use attachments and accessories provided/specified by the manufacturer.
  9. Unplug this device from the outlet during storms, or when the device is not going to be used for a long time.
  10. Refer all servicing to qualified service personnel. Servicing is required when the device has been damaged in any way, for example, if the power cord or plug is damaged, liquid has been spilled or objects has been dropped on the device.
  11. Keep the device in a well-ventilated area.
  12. Do not expose the batteries to excessive heat.
  13. Make sure that the voltage of the device and the voltage in the outlet match.
  14. Do not connect the device to a power strip with too many other electronic components.
  15. When unplugging the device, hold the main plug, not the wire.
  16. Remove the batteries from the remote if it not going to be used for a long time.
  17. Do not mix old and new batteries. Do not mix batteries of a different kind. Use consumer-grade, non-rechargeable alkaline batteries.
  18. Place the TV on a flat and stable surface.
  19. Always connect the device to a power outlet with a protective ground connection.
  20. To provide maximum stability, use the stands that are included in the box.
  21. Always place the device on stable surfaces that can support its weight.
  22. Always route the cables in a way, so that they cannot be tripped over, pulled, or grabbed.
  23. Do not press hard or put pressure on the LCD panel. It can cause the panel to break, shatter or make permanent marks.
  24. If the panel does break, do not make contact with the liquid in the panel. This can cause skin irritation. If the liquid gets on your skin, rinse the skin for 15 minutes. If the liquid gets in your mouth, immediately gargle and consult your doctor.

INSTALLATION

Mounting the stand

  1. Place the TV with the front panel facing downwards. Make sure to place the front panel on soft cloth, soft pads or another soft piece of material.
  2. Insert the stand into the holes located on the bottom of the TV (L for left, R for right).
  3. Insert the screws into the sockets and tighten them.

Mounting on the wall
The TV has VESA mounting holes for the wall mounting bracket (not included). Make sure that your bracket is compatible with the TV. VESA standard determines the width and height of the mounting holes for the bracket. Before mounting the TV on the wall:

  • Follow all instructions from the wall mount manufacturer.
  • If you have any doubts about your ability to safely install the TV on the wall, contact a professional.
  • Make sure that the wall can support the weight of the TV and the mount.
  • When installing the TV on the wall, do it with someone to help you.
  • Make sure that the TV has at least 20 cm clearance from each side.

BUTTONS ON THE TV

Note: the location, name and availability of the buttons may vary according to the TV model.

  • Press and hold the button to turn on the TV.
  • Press the button to turn off the TV.

SOCKETS

On the side

  1. HDMI ports
  2. USB port
  3. CI socket
  4. Headphone jack outputKruger-Matz-KM0232-SA-32-Inch-Smart-TV-FIG-4

On the bottom

  1. Ethernet socket
  2. Optical audio output
  3. AV input
  4. Audio input
  5. DVB-T2/C antenna input
  6. DVB-S antenna input

Kruger-Matz-KM0232-SA-32-Inch-Smart-TV-FIG-5

INSTALLING BATTERIES

  1. Open the battery compartment by sliding it up.
  2. Insert new batteries, according to the polarity.
  3. Close the battery compartment.

REMOTE CONTROL

Kruger-Matz-KM0232-SA-32-Inch-Smart-TV-FIG-6

  1. Inputs list
  2. Power button
  3. Google Assistant activation button
  4. Accounts button
  5. TV settings button
  6. Directional buttons
  7. OK. button
  8. Back button
  9. TV app / EPG button
  10. Home screen button
  11. Channels list
  12. Functions button
  13. Channel/input info button
  14. Volume adjustment buttons
  15. Channel change buttons
  16. Mute sound button
  17. Streaming apps

FIRST BOOT UP
After powering on the TV for the first time, the first bootup menu will be shown.

  1. Press and hold back and home screen buttons on the remote to activate the pairing mode. After a while, the TV will connect to the remote. Press the OK button.
  2. Select a language from the list and press the OK button.
  3. Select the TV mode: Google TV (with network services activated) or regular TV (without Google services).
    • To configure the Google TV, download the Google Home app on your smartphone and finish the configuration from your smartphone.
    • To configure regular TV mode, connect to your Wi-Fi or use a wired connection.
  4. Read and accept the EULA.
  5. Select a country or region.
  6. Select the connected antenna type (to use DVB-T/2 antenna, select Antenna and Digital).
  7. The TV will start searching for channels. When finished, press the Next button.
  8. After the finished configuration, the TV is ready to use.

CONNECTING TO THE INTERNET

Wired

  1. Connect the RJ-45 cable to your router or other source of the internet.
  2. Connect the cable to the Ethernet socket on the TV.
  3. The TV should automatically configure settings and connect to the internet. If there is a problem with connection, check the Network settings on the TV and/or check if your router is configured properly.

Wireless

Note: wireless connection is available on selected models. Check the box that TV came in to make sure that your TV is equipped with Wi-Fi.

  1. Press the Home button and go to Settings menu.
  2. Go to the Network section and select Network Configuration.
  3. Change the Connection type to Wireless.
  4. Press the Refresh button and wait for your Wi-Fi network to appear.
  5. Select your network and input your password.

The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI Trade dress and HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation.

Radio Frequency Max. output power
Wi-Fi 2400 – 2483,5 MHz

5150 – 5850 MHz

| 23 dBm
Bluetooth| 2400 – 2483,5 MHz| 20 dBm
Product code| EPREL number
---|---
KM0232-SA (32’’)| 1829493
KM0240FHD-SA (40’’)| 1871065
KM0243FHD-SA (43’’)| 1829464
KM0250UHD-SA (50’’)| 1829477
KM0255UHD-SA (55’’)| 1829488
KM0265UHD-SA (65’’)| 1829497

Lechpol Electronics Leszek Sp.k. hereby declares that this TV set is consistent with directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at the following Internet address: www.lechpol.pl. This equipment complies with CE radiation exposure limits for an uncontrolled environment. This device is restricted to indoor use only when operating in the 5150 to 5350 MHz frequency range (for 5 GHz product only).

Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature indicates that it should not be disposed of with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of waste and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.

  • Krüger&Matz is a registered trademark

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals