Kruger Matz KM0198-M24 27 Inch Monitor Owner’s Manual
- June 1, 2024
- Kruger Matz
Table of Contents
Kruger Matz KM0198-M24 27 Inch Monitor
Specifications
- Display: 24” / 27”
- Model Numbers: KM0198-M24, KM0199-M27
- Panel: 1920 x 1080 pixel IPS
- Refresh Rate: 100 Hz
- Brightness: 2 50 nits
- Contrast Ratio: 1000:1
- Aspect Ratio: 16:9
- Viewing Angle: IPS
- Backlight: E-LED
- Response Time: 4 ms
- Display Colors: 16.7 Million
- Inputs: HDMI 1.4 / VGA
- Colour Temperature Modes: Action / Racing / Sports / User/ Standard / ECO / Graphics / Movie
- Features: Adaptive-Sync, Blue Light Filter
- VESA Standard: 100 x 100 mm
- Weight: 2.7 kg (24”) / 3.46 kg (27”)
IMPORTANT SAFETY INFORMATION
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). THERE ARE NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL.
CAUTION: This symbol indicates the presence of non-insulated, dangerous
voltage.
WARNING: This symbol indicates important operating and maintenance.
-
Read this manual carefully and keep it for future reference.
-
Pay special attention to warnings marked with symbols presented above and make sure to follow the information presented next to them.
-
Do not use this device near water or other sources of moisture.
-
Do not block any ventilation openings. Install this device according to this manual.
-
Do not install this device near heat sources such as radiators, stoves or other appliances that produce heat.
-
If the provided plug does not fit into your outlet, do not try to force it and consult an electrician for further advice.
-
Protect the power cord from being walked on or pinched, especially near plugs.
-
Only use attachments and accessories provided/specified by the manufacturer.
-
Unplug this device from the outlet during storms, or when the device is not going to be used for a long time.
Refer all servicing to qualified service personnel. Servicing is required when the device has been damaged in any way, for example, if the power cord or plug is damaged, liquid has been spilled or objects have been dropped on the device. -
Keep the device in a well-ventilated area.
-
Make sure that the voltage of the device and the voltage in the outlet match.
-
Do not connect the device to a power strip with too many other electronic components.
-
Always connect the device to a power outlet with a protective ground connection.
-
To provide maximum stability, use the stands that are included in the box.
-
Always place the device on stable surfaces that can support its weight.
-
Always route the cables in a way, so that they cannot be tripped over, pulled or grabbed.
-
Do not press hard or put pressure on the LCD panel. It can cause the panel to break, shatter or leave permanent marks.
INSTALLATION
Mounting the stand
Disassembling the stand
- Before disassembling the stand, press the stand release button on the back of the monitor.
- Before disassembling the base, press the base release clamp.
Product description
- Power button
- Power input
- HDMI input
- VGA input
Using VESA bracket
The monitor has VESA mounting holes for wall mounting bracket (not
included). Make sure that your bracket is compatible with the monitor. VESA
standard determines the width and height of the mounting holes for the
bracket. Before mounting the monitor on the wall:
- Follow all instructions from the wall mount manufacturer.
- If you have any doubts about your ability to safely install the monitor on the wall, contact a professional.
- Make sure that the wall can support the weight of the monitor and the mount.
- Make sure that the monitor has at least 20 cm clearance from each side.
OPERATION
Connecting
- Plug the power supply to the power socket of the monitor. Plug the power supply to mains socket.
- Press the power button to turn on the monitor. Connect your device (ex. PC, console, NVR) to HDMI or VGA input of the monitor.
- The monitor will automatically switch to the connected input.
- Press and hold the power button to turn off the monitor.
Main menu
- While the monitor is powered on, press the power button to open the main menu.
- To navigate the menu, tilt the power button (in four directions).
- To confirm an option, press the power button.
- To use the Adaptive-Sync function, open the main menu, go to the Gaming menu and enable the Adaptive-Sync option.
CLEANING AND MAINTENANCE
- To clean the LCD panel, spray a solvent-free cleaning solution and gently wipe the screen.
- To clean the stand and frame, use any non-abrasive cleaning agent.
- To store the monitor, disassemble it first and use the original packaging. Do not store the monitor in places with extreme temperatures.
SPECIFICATION
| KM0198-M24| KM0199-M27
---|---|---
DISPLAY
Size| 24’’| 27’’
Resolution| 1920 x 1080 pixel
Panel| IPS
Refresh rate| 100 Hz
Brightness| 250 nits
Contrast| 1000:1
Screen ratio| 16:9
Viewing angle| H: 178°, V: 178°
Backlight| E-LED
Response time| 4 ms
Display colors| 16,7 M
Inputs| HDMI 1.4 / VGA
FUNCTIONS
Color modes| normal / warm / cool / user
Picture modes| Action / Racing / Sports / User/
Standard / ECO / Graphics / Movie
Adaptive-Sync| ✔| ✔
Blue light filter| ✔| ✔
POWER SUPPLY
Input voltage| 100 – 240 V ~ 50/60 Hz
Output voltage| 12 V 2 A| 12 V 3,5 A
Power consumption| 18 W| 21 W
Power consumption in stand-by mode| 0,3 W
PHYSICAL PARAMETERS
VESA| 100 x 100 mm
Weight| 2,7 kg| 3,46 kg
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate
collection systems) This marking shown on the product or its literature
indicates that it should not be disposed of with other household wastes at the
end of its working life. To prevent possible harm to the environment or human
health from uncontrolled waste disposal, please separate this from other types
of waste and recycle it responsibly to promote the sustainable reuse of
material resources. Household users should contact either the retailer where
they purchased this product, or their local government office, for details of
where and how they can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and
conditions of the purchase contract. This product should not be mixed with
other commercial wastes for disposal.
Made in China for Lechpol Electronics Leszek Sp.k., ul. Garwolińska 1, 08-400 Miętne.
Kruger & is a registered trademark
FAQ
Frequently Asked Questions
- Q: Can I use this monitor with a gaming console?
- A: Yes, you can connect gaming consoles to this monitor using the HDMI input for an enhanced gaming experience.
- Q: How do I adjust the display settings?
- A: You can adjust the display settings through the monitor’s menu accessed by buttons located on the monitor’s bezel.