Kruger Matz KMPM19 Wireless Earphones with Power Bank Owner’s Manual
- June 1, 2024
- Kruger Matz
Table of Contents
Kruger Matz KMPM19 Wireless Earphones with Power Bank
Product Information
Specifications
- Brand: KMPM19
- Wireless Technology: Bluetooth
- Magnet: Neodymium
- Frequency Response: 20 Hz – 20 kHz
- Impedance: 32 Ohms
- Sound Pressure Level (SPL): 94.2 dB
- Total Harmonic Distortion (THD):
Product Usage Instructions
Charging
To charge the wireless earphones, use the provided charging cable and connect it to a power source. Make sure to fully charge the earphones before first use.
Pairing
To pair the earphones with your device, ensure Bluetooth is enabled on your device. Press and hold the pairing button on the earphones until the LED indicator flashes. Select the earphones from the list of available devices on your device’s Bluetooth settings.
Answering Calls
To answer an incoming call, press the designated button on the earphones. To reject a call, press and hold the button. You can also activate the voice assistant by pressing a specific button.
Low Latency Mode
The earphones feature a low latency mode for reduced delay in audio playback. To activate this mode, follow the instructions provided in the user manual.
Additional Features
The earphones may have additional features like a built-in flashlight. Refer to the user manual for instructions on how to use these features.
FAQ
- Q: How do I reset the earphones?
- A : To reset the earphones, turn them off, then press and hold the power button for 10 seconds until you see the LED indicator flash rapidly.
- Q: Can I use the earphones while exercising?
- A : Yes, the earphones are designed to be sweat-resistant and suitable for use during exercise.
SAFETY INSTRUCTIONS
- Read the instruction manual carefully before first use and keep it for future reference.
- Minimize the volume on your audio device before connecting the earphones in order to avoid hearing damage from sudden exposure to excessive volume. Keep the volume at a reasonable level throughout entire time of using the earphones. To prevent damage to your hearing, do not raise the volume too high.
- Do not use the earphones in places where the inability to hear ambient sound presents a serious risk (such as at railroad crossings, train stations, construction sites or on roads where vehicles and bicycles are traveling). Never use the earphones while driving a car, riding a motorcycle or bicycle or operating any other vehicle, as it may cause potential risk to your safety.
- Wireless devices can cause interference in aircraft. Please make sure that your earphones are powered off in flight.
- Follow any special regulations in force in any area such as hospitals and always switch off your earphones whenever it is forbidden to use it or, when it may cause interference or danger.
- Follow basic safety precautions while using the earphones
- Stop using the earphones if you feel tinnitus, hearing discomfort, irritation or have other adverse reactions.
- Do not subject the earphones to strong impact.
- Keep this product away from children.
- Protect this product from moisture, humidity, water and any other liquid. Avoid using/ storing it in extreme temperatures. Do not expose it to direct sunlight and sources of heat.
- Never use this device if it is damaged.
- Use only authorized accessories.
- Do not attempt to repair this device yourself. In case of damage, contact an authorized service point for checkup/ repair.
- Turn off the earphones before cleaning.
- Clean this device with a soft, slightly damp cloth. Do not use any abrasives or chemical agents to clean this product.
CHARGING
Earphones
- Place both earphones into the charging case. Make sure to align the charging contacts correctly on the earphones and the charging case. Charging should start automatically.
- During charging a LED on the earphones is on. When the battery is fully charged, LED goes off.
Note : When the battery is low, there will be a voice notification issued every 30 seconds.
Charging case
- Connect the USB-C plug of the USB cable to the USB-C port of the charging case. Connect the other plug to the AC adapter or a compatible PC USB port.
- The digits on the LED display flash during charging.
- When the battery is fully charged, the display shows [100].
Charging the external devices
- Connect the external device to the USB output of the charging case/power bank.
- Charging starts automatically. Check the charging case/power bank battery level on the LED display
OPERATION
- To turn on the earphones, take them out of the charging case or press and hold touch panel
- The battery level of the case is indicated by a display on the case.
PAIRING
- Take out both earphones from the case. The earphones will connect with each other automatically.
- The LED indicator of the right earphone will light up to indicate the pairing mode with the external device.
- Turn on the Bluetooth function on the external device and search for new Bluetooth devices.
- Select M19 and connect the external device with the earphones.
- After successful pairing, the LED indicator will stop flashing, and the audio cue will be played.
Caution
- The earphones will turn off after 3 minutes of idle.
- The distance between earphones can’t exceed 2 meters.
MONO MODE
You can use just one of the earphones. After pairing the earphones with the
external device, place one of the earphones in the case, or turn it off. The
second earphone will stay connected to the external device.
TOUCHPANEL FUNCTIONS
- Tap to play or pause the music.
- While playing, tap twice the touch panel of the right earphone, to fast forward to the next track.
- While playing, tap twice the touch panel of the left earphone, to go back to the previous track.
- While playing, tap three times the touch panel of the right earphone, to turn up the volume.
- While playing, tap three times the touch panel of the left earphone, to turn down the volume.
- Tap twice to pick up an incoming call.
- Touch and hold the touch panel to reject an incoming call.
- Tap the touch panel of the right earphone three times to activate the voice assistant.
- Tap the touch panel of the left earphone twice to activate/deactivate game mode. While the game mode is activated, the earphones have low latency.
FLASHLIGHT
To turn on the flashlight, press the button next to the USB-C port.
SPECIFICATION
- Speaker size : 8 mm
- Magnet : neodymium
- Frequency response : 20 Hz – 20 kHz Impedance: 32 Ohm
- SPL : 94,2 dB
- THD: <3% (@1 kHz)
- Nominal input power: 3 mW
- Maximum input power : 3 mW
- Protection class : IPX4
- Bluetooth: 5.3
- Bluetooth range: up to 10 m
- Bluetooth profiles: A2DP/AVRCP/AVDTP/RFCOMM/HFP/HSP/SPP/HID
- Microphone sensitivity: -43 dB -/+ 3 dB Microphone S/N ratio: 58 dB Voice call management
- Ports: USB-A, USB-C
- Playback time : up to 3 h
- Talk time: up to 2 h
- Flashlight: 16 mW
- Charging time:
- Earphones: approx. 1 hour
- Charging case/ power bank: up to 2 hours Battery capacity: 2x 30 mAh (earbuds); 400 mAh (charging case)
- Power supply: 5 V, 1 A Earphone battery power status (Android, iOS) Set includes: USB-C cable, 3 pairs of eartips
Lechpol Electronics Leszek Sp.k. hereby declares that wireless earphones KMPM19 are consistent with directive 2014/53/UE. The full text of the EU Declaration of Conformity is available at the following Internet address: www.lechpol.pl
Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or Its literature indicates that It should not be disposed of with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of waste and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract This product should not be mixed with other commercial wastes for disposal.v Made in China for Lechpol Electronics Leszek Sp.k., ul. Garwolińska 1, 08-400 Miętne
www.krugermatz.com Krüger«Matz is a registered trademark
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>