Kruger and Matz KMPM10 Wireless earphones Owner’s Manual

Kruger and Matz KMPM10 Wireless earphones Owner’s Manual

SAFETY INSTRUCTIONS

• Read the instruction manual carefully before first use and keep it for future reference.

• Minimize the volume on your audio device before connecting the earphones in order to avoid hearing damage from sudden exposure to excessive volume. Keep the volume at a reasonable level throughout entire time of using the earphones. To prevent damage to your hearing, do not raise the volume too high.

• Do not use the earphones in places where the inability to hear ambient sound presents a serious risk (such as at railroad crossings, train stations, construction sites or on roads where vehicles and bicycles are traveling). Never use the earphones
  while driving a car, riding a motorcycle or bicycle or operating any other vehicle, as it may cause potential risk to your safety.

• Wireless devices can cause interference in aircraft. Please make sure that your earphones are powered off in flight.

• Follow any special regulations in force in any area such as hospitals and always switch off your earphones whenever it is forbidden to use it or, when it may cause interference or danger.

• Follow basic safety precautions while using the earphones.

• Stop using the earphones if you feel a tinnitus, hearing discomfort, irritation or have other adverse reactions.

• Do not subject the earphones to strong impact.

• Keep this product away from children.

• Protect this product from moisture, humidity, water and any other liquid. Avoid using/ storing it in extreme temperatures. Do not expose it to direct sunlight and sources of heat.

• Never use this device if it is damaged.

• Use only authorized accessories.

• Do not attempt to repair this device yourself. In case of damage, contact with an authorized service point for checkup/ repair.

• Turn off the earphones before cleaning.

• Clean this device with soft, slightly damp cloth. Do not use any abrasives or chemical agents to clean this product.

CHARGING

Earphones

1. Place both earphones into the charging case. Make sure to align the charging contacts correctly on the earphones and the charging case. Charging should start automatically.
2. During charging a LED on the earphones is on. When the battery is fully charged, LED goes off.

Note : When the battery is low, there will be a voice notification issued every 30 seconds.

Charging case

1. Connect the USB-C plug of the USB cable to the USB-C port of the charging case. Connect the other plug to the AC adapter or a compatible PC USB port.
2. The digits on the LED display flash during charging.
3. When the battery is fully charged, the display shows [100].

Charging the external devices

1. Connect the external device to the USB output of the charging case/power bank.
2. Charging starts automatically. Check the charging case/power bank battery level on the LED display

OPERATION

1.  To turn on the earphones, take them out of the charging case or press and hold touch panel.
2. The battery level of the case is indicated by a display on the case.

PAIRING

1. Take out both earphones from the case. The earphones will connect with each other automatically.
2. The LED indicator of the right earphone will light up to indicate the pairing mode with the external device.
3. Turn on the Bluetooth function on the external device and search for new Bluetooth devices.
4. Select M10 and connect the external device with the earphones.
5. After successful pairing, the LED indicator will stop flashing, and the audio cue will be played.

Caution:

• The earphones will turn off after 3 minutes of idle.
• The distance between earphones can’t exceed 2 meters.

MONO MODE
You can use just one of the earphones. After pairing the earphones with the external device, place one of the earphones in the case, or turn it off. The second earphone will stay connected to the external device.

TOUCHPANEL FUNCTIONS

• Tap to play or pause the music.
• While playing, tap twice the touchpanel of the right earphone, to fast forward to the next track.
• While playing, tap twice the touchpanel of the left earphone, to go back to the previous track.
• While playing, tap three times the touchpanel of the right earphone, to turn up the volume.
• While playing, tap three times the touchpanel of the left earphone, to turn down the volume.
• Tap twice to pick up an incoming call.
• Touch and hold the touchpanel to reject an incoming call.
• Tap the to cPanel of the right earphone three times to activate the voice assistant.
• Tap the to cPanel of the left earphone twice to activate/deactivate game mode. While the game mode is activated, the earphones have low latency.

SPECIFICATION

Speaker size : 8 mm
Magnet : neodymium
Frequency response: 20 Hz – 20 kHz
Impedance: 32 Ohm
SPL : 94,2 dB
THD : <3% (@1 kHz)
Nominal input power: 3 mW
Maximum input power : 3 mW
Protection class: IPX4
Bluetooth: 5.3
Bluetooth range : up to 10 m
Bluetooth profiles: A2DP/AVRCP/AVDTP/ RFCOMM/HFP/HSP/SPP/HID
Microphone sensitivity: -43 dB -/+ 3 dB
Microphone S/N ratio: 58 dB Voice call management
Ports: USB-A, USB-C
Playback time: up to 3 h
Talk time: up to 2 h
Charging time : Earphones: approx. 1 hour
Charging case/ power bank: up to 2 hours
Battery capacity: 2x 30 mAh (earbuds); 400 mAh (charging case)
Power supply: 5 V, 1 A
Earphone battery power status (Android, iOS)
Set includes: USB-C cable, 3 pairs of eartips Lechpol Electronics Leszek Sp.k. hereby declares that wireless earphones KMPM10 is consistent with directive 2014/53/UE. Full text of the EU Declaration of Conformity is available at following Internet address: www.lechpol.p

Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or Its literature, indicates that It should not be disposed with other household wastes at the end of its working life. To prevent possible harm lo the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it  responsibly to promote the sustainable reuse of materialresources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract This product should not be mixed with other commercial wastes for disposal.
Made in China for Lechpol Electronics Leszek Sp.k., ul. Garwolińska 1, 08-400 Miętne.
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>