Kruger Matz KM2240 Connect Tuya Wi-Fi surveillance system User Manual

Kruger Matz KM2240 Connect Tuya Wi-Fi surveillance system

Specifications

• Model: KM2241
• Product: Wi-Fi Surveillance System
• Language Options: DE, EN, PL, RO

Features

1. Operating indicator
2. Screen on/off function
3. Ethernet port
4. Camera lenses
5. IR sensors

Installation:

1. Mount the camera at your desired location.
2. Connect the SATA connector to the hard drive.
3. Replace the cover and tighten the screws.

Operation

1. Plug in the NVR to turn it on automatically.

2. Upon the first startup, the configuration wizard will appear.

3. Log in to the administrator account with the default password ‘admin’.

   • Set date, time, language, and format.
   • Configure connected drives (including formatting) and set actions when drive is full. Click ‘Next’.
   • Scan the QR code and download the Tuya application.
   • After configuring the Tuya app, scan the provided QR code to preview cameras in the app. Finish setup. NVR is ready for operation.

4. Double-click a camera preview to view in full screen.
   Double-click again to revert.

5. Right-click on the screen and select ‘Shutdown’ after use.

HDD Management

1. List of connected drives
2. Format drive
3. Behavior when driving is full
4. Data limit in days

FAQ

1. Q: How can I adjust camera settings?
   A: Access IPC configuration to adjust color, camera names, codecs, advanced settings, and updates.

2. Q: How do I set up motion detection?
   A: Navigate to the alarm section to configure motion detection settings and areas.

3. Q: What should I do if there is a signal loss?
   A: Set up the behavior after signal loss in the alarm settings.

SAFETY INSTRUCTIONS

1. Before the installation make sure to read up on local restrictions about recording and surveillance systems.
2. Protect the device from exposure to high or low temperatures.
3. Protect the device from water and other liquids. Do not handle this device with wet hands.
4. Do not use the device where it is prohibited to use 2,4 GHz band.
5. Before cleaning the device, make sure that is unplugged from power.
6. Clean this device regularly, with soft, dry cloth, without any abrasive agents.
7. Do not disassemble or try to repair the device. In case of damage or malfunction, contact the authorized service point.

PRODUCT DESCRIPTION

1. Power indicator
2. Screen on/off
3. Ethernet port
4. USB port
5. USB-C port
6. Power socket
7. Stand holes
8. Camera lens
9. IR sensors
10.  Reset/pairing button

INSTALLATION

NVR

1. Connect the mouse to the USB port.
2. Connect the power box to the USB-C port
3. Connect the power adapter to power supply socket. Connect the power adapter to a power outlet.
4. Optional: connect the Ethernet cable to the Ethernet port.

Camera

1. Mount the camera on a place that you chose.
2. Connect the power adapter to the camera and to the power outlet.

Hard drive

1. Unscrew the screw holding the battery cover.
2. Slide the HDD to the SATA connector.
3. Put the cover back and screw it in.

OPERATION

1. After connecting the power adapter to the power outlet, the NVR will turn on automatically.
   When you first turn on the NVR, the configuration wizard will be displayed.

2. Log in to the admin account. The default password is: admin.

   • Set the date, time, language and resolution. Press the Next button.
   • The list with connected drives will be shown. You can perform a drive format (with the Format button) and set the action after filling the drive. Press the Next button.
   • Scan the QR code and download the Tuya app.
   • If the Tuya app has been configured, scan the provided QR code to gain access to the camera preview in the app. To do this, check the “App pairing” paragraph. Press the Finish button. The NVR is ready to use.

3. Click a camera preview twice to set it to full screen. Click twice again to close it.

4. Click the right mouse button on the camera preview to open the context menu.

   • To turn off the device, open the context menu, press the Shutdown, then Shutdown button. After a moment, you can disconnect the power supply.

CONTEXT MENU

Camera pairing
This menu allows to browse, pair and delete the cameras.

1. To disconnect the camera from the NVR, press the Delete button.
2. To pair a new camera to the NVR, press the Pair button. On the camera, press and hold the pairing button until the NVR displays the information about successful pairing.

Main menu
Check the “Main menu” paragraph for details.

Playback

1. Select a day
2. Select an hour
3. Select a camera
4. Playback control
5. Timeline

Recording mode

In this menu you can change the record mode in set time.

To do this

1. Select a camera (or all of them).
2. Select the record mode:
   • Continuous recording (blue)
   • Recording after detecting a motion (green)
   • No recording (white)
3. Click or drag across the grid, to set the record mode.
4. If you want to copy the recording schedule to another camera, select a camera, and press the Copy button.

Backup

In this menu you can make backup of recordings to an external hard drive. Connect the external hard drive to the USB port.

1. Select a camera (or all of them).
2. Select date and time. Press the Search button.
3. The list of recordings will be shown. Select the recording that you want to backup and press the Backup button.
4. Progress of the backup is shown on the bottom of the window.

IPC Config

1. Color configuration
2. Setting the camera name
3. Codecs
4. Advanced settings
5.  Updates

About

1. LOG- view the events log
2. Info- view the software info Switching off
3. Wyłączanie rejestratora View 4/6/8/9
4. View the number of previews on one screen.

SYSTEM SETTINGS

General

1. Date and time:
2. Language
3. Resolution
4. Auto logout time (in minutes)
5. Daylight saving time
6. NTP protocol settings
7. Synchronizing with IPC
8. Guide during boot up
9. Dual-stream

Display

1. Changing the channel title

2. Viewing info on preview

3. Cycle through previews

   • Turning on the cycle

   • Cycle time (in seconds)

   • Cycle channels
     For cycle to work properly, assign a preview to every channel. If you want to display every preview one by one, assign one preview to every channel.

   • Adding, deleting and modifying channels

   • Working after detecting the alarm

Network configuration

1. Select the network card
2. IP configuration
3. Tuya settings
4. Advanced

HDD management

1. Connected disks list
2. Formatting the hard drive
3. Disk behavior when full
4. Data limit (in days)

Accounts

1. Adding new user
   When adding a new user, set the name, password and permissions. Adding accounts is only available when the admin account is active.

2. Deleting and modifying users.

Alarm

1. Select the camera to modify.
2. Set the motion detection
3. Set the motion detection range
4. Delay
5. Save channel/channel cycle
6. Setting the alarm
7. Set the behavior after signal loss

Change the display mode
In this menu you can change the number of previews on one screen. Caution: after each change of this setting, the system will restart and delete all of the cameras.

Reset to Default
In this menu you can select which one of the setting you want to reset to default (or select all of them).

Software Update

1. Select the update source, update file and press the Upgrade button.
2. If the NVR is connected to the network, press the Check updates button.

APP PAIRING

Attention: pairing requires an account in the Tuya app.

1. Press the Add device button.
2. Select pairing with the QR code.
3. In the DVR, open the Tuya settings menu. Scan the P2P QR code.
4. After a moment, the NVR will be added to the app.
5. To view the previews, select the NVR from the main screen of the app.

Web browser access
Feed from the camera is available only in Google Chrome.

1. Open the browser and type ipc-eu. smart life.me/login in the address bar.
2. Open the Tuya app on your smartphone.
3. Go to the “Me” menu.
4. Press the icon in the top right.
5. Scan the QR code from the browser.
6. Press the button, to authorize the login.
7. The feed from the camera will be shown in the browser.

SPECIFICATION

• Recording after motion detection
• Scheduled recordings
• Motion and face detection
• Works with Tuya app
• Web-browser access
• Range up to 120 m (without any obstruction)
• Simultaneous preview from 4 cameras
• Wi-Fi Communication (2,4 GHz)
• Automatic pairing with cameras

NVR specification

• CPU: MC6810

• Display: 10.1” (1280 x 800 px)

• Operating system: Linux

• Communication protocols: TCP/IP, HTTP, NTP, DHCP, UDP, ARP, DDNS, DNS

• HDD socket: SATA 2,5”

• Maximum disk capacity: 4 TB
  Ports: RJ-45, USB

• Power consumption: 5 W (without a hard drive)

• Power supply: 12 V / 2 A

• Working temperature: -10°C ~ 60°C

• Working humidity: 10% ~ 90%

• Dimensions: 264 x 170 x 27,5 mm

• Weight: 620 g

Camera specification

• Sensor: CMOS
• Lens: 3,6 mm
• Resolution: 3 Mpx (2048 x 1536 px)
• Framerate: 20 FPS
• Viewing angle: 75,7°
• Compression: H.265
• IR diodes range: 30 m
• Protection class: IP66
• Power supply: 12 V / 1 A
• Working temperature: -30°C ~ 50°C
• Working humidity: 0% ~ 90%
• Dimensions: 172 x 61 x 61 mm
• Weight: 313 g
• In set: NVR unit, NVR power supply, camera (4 pcs.), camera power supply (4 pcs.), mouse
• OSD languages: portuguese, russian, spanish, italian, french, czech, german, finnish, bulgarian, swedish, romanian, greek, vietnamese, turkish

Lechpol Electronics Leszek Sp.k. hereby declares that the Wi-Fi surveillance system KM2241 is consistent with directive 2014/53/UE.
Full text of the EU Declaration of Conformity is available at following Internet address: www.lechpol.pl.

Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)

(Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.
Made in China for Lechpol Electronics Leszek Sp.k., ul. Garwolińska 1, 08-400 Miętne.

References

• ipc-eu.ismartlife.me/
• ipc-eu.ismartlife.me/login

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>