oceanic OCEARTT90C2 Table Top Refrigerator Instruction Manual
- October 27, 2023
- Oceanic
Table of Contents
- IMPORTANT SAFETY INSTRUCTIONS
- INSTALLATION INSTRUCTIONS
- POWER FAILURE
- CLEANING AND MAINTENANCE
- TECHNICAL SPECIFICATIONS
- NAMES OF PARTS
- REVERSING THE DOOR:
- ADJUSTING THE TEMPERATURES AND FUNCTIONS
- BREAKDOWNS AND SOLUTIONS
- GUARANTEE
- Disposal of the appliance
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
TABLE TOP REFRIGERATOR
Instruction booklet
OCEARTT90W2/OCEART T90B2/OCEARTT90S82
IMPORTANT SAFETY INSTRUCTIONS
Read these operating instructions carefully before using the appliance and keep them for future use.
- WARNING: When positioning the appliance, ensure the power cord is not trapped or damaged.
- WARNING: Do not locate multiple portable socket-outlets or portable power supplies at the rear of the appliance.
- WARNING: Risk of child entrapment.
- WARNING: Keep ventilation openings in the appli- ance enclosure or in the built-in structure clear of obstruction.
- WARNING: Do not damage the refrigerant circuit.
- WARNING: Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.
- WARNING: Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer.
- WARNING: Do not use this product in a place where children can touch it, and do not leave children to use it unattended. Before disposing of your used appliance: Remove the doors and leave the shelves in place so that a child cannot easily climb into the unit.
- Never allow children to use, play with or climb into the unit.
- Never clean the components of the unit with flammable liquids.
- Do not store or use gasoline or any other flammable liquids or gases near this or any other appliance. Vapors present a risk of fire or explosion.
- Do not use abrasive cleaners or solvents to clean your appliance. Glass cleaners or soapy water give excellent results.
Symbol ISO 7010 W021
This symbol indicates a fire hazard.
- Leave 10 cm of free space at the back of the unit to allow for ventilation of the cooling system.
- In order to store your food at a stable temperature, avoid leaving the door open for too long.
- Do not install your appliance near a heat source, and avoid direct sunlight.
- Install your appliance on a flat, clean and stable floor.
- Do not install any other electrical equipment on your appliance.
- To ensure your safety, do not place your appliance in damp places.
- This appliance is intended to be used in household and similar applications, but not in the following cases:
- staff kitchen areas in shops, offices and other working environments;
- farm houses and by clients in hotels, motels and other residential type environments;
- bed and breakfast type environments;
- catering and similar non-retail applications.
- This appliance is designed for use inside a house or apartment. For optimal use, it is essential that the temperature of the room in which it is used is not lower than 16° C or higher than 38°C.
- Children aged between 3 and 8 years are allowed to load and unload refrigerating appliances. This appliance may be used by children 8 years of age or older and by persons with reduced physical, sensory or mental abilities or lack of experience or knowledge, provided that they are properly supervised or have received instructions on the safe use of the appliance and the associated risks.
- Children must not play with the appliance.
- Cleaning and user maintenance must not be done by children without supervision.
- To avoid contamination of food, please respect the following instructions:
- Opening the door for long periods can cause a significant increase of the temperature in the compartments of the appliance.
- Regularly clean surfaces that may come into contact with food and accessible drainage systems.
- Clean water tanks if they have not been used for 48 h; flush the water system connected to a water supply if water has not been drawn for 5 days.
- Store raw meat and fish in suitable containers in the refrigerator, so that it is not in contact with and cannot drip onto other food.
- Two-star frozen-food compartments are suitable for storing pre-frozen food, storing or making ice-cream and making ice cubes.
- One-, two- and three-star compartments are not suitable for the freezing of fresh food.
- If the refrigerating appliance is left empty for long periods, switch off, defrost, clean, dry, and leave the door open to prevent mold developing within the appliance.
- Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. This refrigerating appliance is not intended to be used as built-in appliance.
If the supply LED bulb is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
Disposal of waste
To avoid any harm to the environment or human health caused by the
uncontrolled disposal of electrical waste, recycle the appliance responsibly
to promote the reuse of material resources. Disposal must be done safely at
public collection points provided for this purpose. Older refrigerators may
contain CFCs that destroy the ozone layer; contact your nearest waste
treatment center for more details on proper disposal procedures.
INSTALLATION INSTRUCTIONS
Before putting your appliance into service
Remove all inner and outer packaging components.
Check that none of the following parts are missing:
NO. | Contents | BC-90A |
---|---|---|
1 | Main appliance | 1 unit |
3 | Operation manual | 1 copy |
- Before connecting your appliance to a power supply, allow it to stand upright for about 2 hours. This reduces the risk of malfunction of the refrigeration system due to handling during transport.
- Clean the inner surfaces of the unit with a soft cloth and warm water.
- Place your unit on a floor strong enough to support the weight of the fully filled unit.
- Make sure the unit is level by adjusting the front feet underneath the unit. Make sure that the appliance rests on its feet in a stable manner.
- Install the appliance away from direct sunlight and heat sources (radiator, hot plate, etc.). Direct sunlight can damage the unit’s coating and heat can increase its power consumption. If the ambient temperature is extremely cold or hot, this may prevent the unit from operating properly.
- The unit is not designed to be installed in a basement or appliance.
- Caution: Make sure that the unit is kept away from any substance that may cause combustion.
- Check that the water tank is in place before connecting the unit.
POWER FAILURE
If there is a power failure, do not open the appliance door. Frozen food should not be affected if the power failure lasts for less than 15 hours. Do not refreeze frozen foods that have thawed completely. The food may be dangerous to eat.
CLEANING AND MAINTENANCE
Cleaning your appliance
- Unplug your appliance and remove all the food.
- Clean the inner surfaces with warm water and a mild detergent.
- Remove the water tank at the bottom of the unit, then wash it.
Moving your appliance
- Remove food and disconnect the appliance.
- Tape all loose parts inside your appliance.
- To avoid damage, turn the feet to adjust their height to the minimum.
- Tighten the door to keep it closed.
- Be sure to keep the appliance upright during trans-port.
TECHNICAL SPECIFICATIONS
Model| OCEARTT90W2
OCEARTT90B2
OCEARTT90S2|
---|---|---
Model No.| BC-90A
Voltage| 220-240 V-
Frequency| 50 Hz
Current| 0.6A
Insulation blowing gas| R600a(22g)
Dimensions (WW*D/mm)| 825’453’455
Energy class| F
Energy consumption of 105 kWh per year, calculated on the basis of the result
obtained for 24 hours under standardized test conditions. Actual energy
consumption depends on the operating conditions and location of the unit.
Total volume| 85L
Fresh food compartment volume| 85L
Climate class| N,ST
This unit is designed for use at an ambient temperature between +16°C and
+38°C
Noise emissions| 39 dB
2019/2016 on the energy labelling of refrigeration appliances, can be viewed
via the link below or by scanning the QR code on the energy label of the
product.
https://eprel.ec.europa.eu/qr/1101316
https://eprel.ec.europa.eu/qr/1101319
https://eprel.ec.europa.eu/qr/1101321
NAMES OF PARTS
1. Low temperature compartment 0 *
2. Refrigerator thermostat
3. Drip tray
4. Shelf| 5. Lid of the vegetable drawer (s)
6. Vegetable drawer
7. Adjustable feet
8. Door shelves
---|---
REVERSING THE DOOR:
Users can change the direction of opening according to one’s own needs The concrete operating sequence is as follows:
-
Using a flat blade screwdriver, remove the plastic hinge cover from the top of the door.
Be careful not to scratch freezer surface. -
Using a slotted screwdriver, unscrew the three screws from the top hinge bracket. Remove the bracket. Lift and remove the door from the bottom hinge pin. Set door safely aside.
-
On the opposite side of the unit, use a thinbladed tool to carefully pry up and remove the hole plug from top of door and plastic square cover from top of cabinet. Insert plug and cover into provided hole on opposite side of door and into holes exposed by removal of top hinge bracket.
-
Unscrew and remove the leveling foot from he bottom hinge bracket. Using a slotted screwdriver, remove the two screws attaching he bottom hinge bracket to the cabinet. Unscrew the foot from the other side of cabinet. Attach bracket and feet to opposite sides from which removed.
-
Mount the door onto the bottom bracket. Insert top bracket hinge pin into hole in top of door. Use the three previously removed screws to attach back of top bracket to cabinet.
-
Replace the plastic hinge cover over the top hinge bracket.
7.Check that the door is aligned horizontally and vertically with the the perimeter of the cabinet opening before finally tightening the top hinge. After tightening, adjust the leveling feet if necessary to align the door evenly with the floor.
CAUTION: If the freezer has been placed in a horizontal or tilted position for ease of doing reversal, wait 24 hours before plugging it in. Plugging in sooner may result in permanent damage to cooling system.
ADJUSTING THE TEMPERATURES AND FUNCTIONS
Your unit has only one control for regulating the temperature in the
compartment. The temperature control is located on the upper right hand side
of the compartment.
The first time you turn the unit on, set the temperature control to “7”. The
range of the temperature control is from position “0” to “7”. After 24 to 48
hours, adjust the temperature control to the setting that best suits your
needs. The setting of “4 – 5” should be appropriate for home or office use.
To turn the refrigerator off, turn the temperature control to ”0”.
NOTE:
- Turning the temperature control to “0” position stops the cooling cycle but does not shut off the power to the unit.
- If the unit is unplugged, has lost power, or is turned off, you must wait 3 to 5 minutes before restarting the unit. If you attempt to restart before this time delay, the unit will not start.
The combination of drawers, baskets and shelves that result in the most efficient use of energy for the appliance is the default configuration after you open the package.
FOOD CONSERVATION
Carefully wrap fresh foods to ensure that they keep their flavor, color,
moisture and freshness. This also prevents the taste of some foods
contaminating the taste of others. Only vegetables, fruit and salad vegetables
can be stored in the vegetable compartment without being packed. Let
hot dishes and drinks cool down outside the appliance. Remove the cardboard
packs from around yoghurt pots. Check the consume-by dates on the
products you have bought.
Store raw meat and fish in suitable containers in the refrigerator, so that it
is not in contact with and cannot drip onto other food.
ARRANGING FOOD IN YOUR REFRIGERATOR
The temperature inside your refrigerator is not uniform.
Some areas are colder than others, and you must store your food in the
appropriate areas according to their type to ensure that they can be kept
safely. Leave a space between food items to allow theair to circulate freely
and prevent different products contaminating each other.
Do not put packages and food in contact with the wall at the back of the
appliance; this is a particularly cold and damp area of the appliance and
water droplets and frost condense there as part of your refrigerator’s normal
operation.
The coldest area, at the bottom of the fridge, is designed for delicate,
sensitive and highly perishable food such as meat, poultry, fish, cooked
meats, prepared dishes, ready-made salads, egg or cream based dishes and
pastries, fresh pasta, pastry, pizza/quiches, fresh produce and raw milk
cheese, ready-to-use vegetables sold in plastic bags and, more generally, any
fresh product whose consume-by date is linked to its storage at a temperature
of +4°C or below.
If the food cannot be stored in a suitable area and at a proper temperature,
it might perish.
The following symbol shows the coolest zone in the refrigerator. This zone is
between the fruit and vegetable glass shelf and the symbol, or the shelf
located at the same height. To guarantee temperatures in this zone, do not
modify the positioning of the shelves. Temperature indicator installation
To help you set your refrigerator, it should be equipped with a temperature
indicator which will help to control the average temperature in the coolest
zone.
CAUTION: this indicator is set to work with this refrigerator. Do not use
it in another refrigerator or for another purpose.
Temperature check in the coolest zone
This indicator allows you to check that the temperature in the coolest zone is
correct. The temperature inside the refrigerator differs according to several
factors such as the ambient temperature, the quantity of food loaded in the
refrigerator and the frequency with which the door is opened. Take these
factors into consideration when setting the temperature of the appliance. When
the indicator reads OK, it means that your thermostat is set correctly, and
that the indoor temperature is correct. If there is no color on the indicator,
this means that the temperature is too high. In this case, increase the
setting of the thermostat and wait for a while before performing another
visual check of the indicator. After loading or opening the door, the
indicator may show no color for a while.
BREAKDOWNS AND SOLUTIONS
Some malfunctions can be easily resolved. Before calling customer service or a technician, please consult the following table. If the issue persists, you need to access professional repair services.
PROBLEM | POSSIBLE CAUSES & SOLUTIONS |
---|---|
The appliance does not work. | The appliance is not connected to a power |
supply.
The circuit-breaker is tripped, or the fuse is damaged.
Check if the outlet is powered by connecting another electrical device.
The appliance is not cold enough.| Check the temperature setting.
A high ambient temperature may require setting the appliance to a colder
temperature.
The door is being opened too often.
The door is not completely closed.
The door seal is not properly positioned.
There is not enough space around the appliance to allow ventilation.
The appliance operates continuously.| The room temperature is higher than the
maximum supported. There is too much food inside the appliance.
The door is being opened too often.
The door is not completely closed.
The temperature control is not calibrated correctly.
The door seal is not properly positioned.
The light doesn’t work.| The appliance is not plugged in.
The circuit-breaker has been tripped or a fuse is damaged. The LED light
doesn’t work.
The light button is set to “OFF”.
The appliance vibrates.| Check to make sure the appliance is level.
The appliance seems to be making too much noise.| The appliance is not level,
or a foot is incorrectly adjusted.
The door does not close properly.| The appliance is not level.
The shelves are out of position and blocking the door closure.
There is water under the appliance.| Water is being collected incorrectly in
the water tank on the back of the unit.
Check that the water tank is in place.
Empty the water tank.
GUARANTEE
Your refrigerating appliance is guaranteed by the manufacturer for a period of 24 months from the purchase date (as stated on the purchase receipt).
EXCLUSIONS OF GUARANTEE:
The guarantee does not cover the normal wear of the product, nor problems or
damages resulting from: (6) superficial deteriorations due to the normal wear
of the product;
(7) defects or deteriorations due to contact with food or liquids or corrosion
generated by rust;
(8) any incident, abuse, misuse, modification, disassembly or unauthorized
repairs;
(9) any incorrect maintenance operations, improper use and connection to an
incorrect power supply;
(10) any use of unofficial or unapproved accessories.
Note: Removing the rating plate or/and product serial number will void
the guarantee.
REPAIR SERVICES
In case of a malfunction during the guarantee period, repair requests must be
addressed to the retailer from which you purchased the appliance. After the
expiry of the guarantee period, refer to the document “Spare parts and
repairs” in the documentation related to your refrigerating appliance
available on the website “www.oceanic.eu”
SPARE PARTS
Spare parts for your product are available for at least 7 years, in accordance
with the European regulation related to the eco-design of refrigerating
appliances.
Refer to the document “Spare parts and repairs” in the documentation related to your refrigerating appliance, which is available on the website “www.oceanic.eu“. This will inform you about:
- the availability of each spare part;
- the spare part purchasing terms;
- professional repair services.
Disposal of the appliance
To avoid any harm to the environment or human health caused by improper
disposal of electrical waste, recycle the appliance responsibly to promote
the reuse of material resources. Disposal must be done safely at public
collection points provided for this purpose.
Older freezers may contain CFCs that destroy the ozone layer; contact your
nearest waste treatment centre for more details on proper disposal procedures.
OCEANIC
120-126 Quai de Bacalan
CS11584
33000 Bordeaux
IMPORTE PAR
A.M.C
123 quai Jules Guesde,
94400, VITRY SUR SEINE,
France