Oceanic OCEAMIXSC05 Basin Mechanical Mixer Instructions
- October 27, 2023
- Oceanic
Table of Contents
Oceanic OCEAMIXSC05 Basin Mechanical Mixer Instructions
Terms of use
- Minimum pressure: 1 bar / maximum: 5 bars (beyond, install a pressure reducer).
- Make sure that the supply pressures for hot and cold water are well balanced.
- Recommended temperature for adjusting the hot water installation: 60 ° C (maximum: 80 ° C)
- Minimum cold water temperature: 10 ° C (a lower temperature would damage your tap). Very hard water is heavily loaded with lime stone which accelerates the scaling of your taps. Treating your water with a softener helps protect your facilities and extend the life of your equipment.
Unpacking
Before handling, make sure that all components are present and visually check their good surface condition. When mounting and / or installing, make sure that by respecting any instructions, you do not experience any difficulty in screwing, tightening, fitting.
Installation
- During assembly, the connection hoses must not be damaged (cutter blow when unpacking), or bent, pinched or twisted. Otherwise, pressure builds up eventually breaking them open, which can cause water damage. Also make sure that the supply hoses are never in contact with any drawers in the cabinet installed under the sink or basin, otherwise a shearing effect may result which could cause the hose to burst.
- For the fitting to your installation: tighten the fitting or the nuts securely using a wrench. Avoid excessive tightening, which could break the thread or cause micro cracks which could expand over time and the pressure of the water and cause a leak.
- When using for the first time, make sure that your product is working (in particular that the water flows at the right temperature and with the right flow rate).
Maintenance / cleaning
The proper functioning of the tap therefore requires regular maintenance.
We therefore recommend:
- never use abrasive or corrosive products. These aggressive products attack coatings and tarnish your faucet.
- clean the chrome surface using a mild soap or soapy water and a soft cloth making sure to rinse well with clean water after cleaning.
- regularly clean the cartridge / tap head (at least once a year), using of a solution of water and white vinegar (let stand overnight).
- clean the aerator-aerator by soaking it in a water / white vinegar solution.
- activate the moving parts (inverter, lever, crosspiece, pull tab) at least once per week to ensure smooth operation over time
#1 Installation Product
#2 Installation Product
FUNCTION
Flexible Connecting Pipes
Care must be taken when connecting the flexible connection pipes to the household pipework to ensure they do not bend sharply and kink or twist.
See below for recommended ways to fit the flexible connecting pipes.
Important: Failure to follow these guidelines may result in poor performance and damage to the flexible connecting pipes
