FeelWorld FW568 5.5 Inch Super Lightweight Field Monitor Stabilizer Gimbal User Manual

5.5″ Super Lightweight
Field Monitor
Stabilizer Gimbal Best Partner
User Manual

**Product Overview

**

Thank you for purchasing our color LCD monitor, which adopts advanced integrated digital signal processing circuits and professional IPS LED panel, which makes it high brightness, low power consumption, stable performance, etc. It is equipped with HDMI input and output, which makes it wide application, casing compact, simple operation, portable convenience, and strong compatibility. Advanced features include 3D LUT, Waveform, Histogram, Embedded Audio, Focus Assist, False Colors, Exposure, Aspect Ratio, Image Flip, P2P, Center Marker, Safe Frames, Check Field, Image Freeze, Nine Grid, Zoom, Anamorphic, etc. It is an ideal, portable, and lightweight viewfinder and video monitor.
The monitor is equipped with a battery plate; you can use the power adapter supply or use the external battery for the power supply.”
To ensure the best use of the unit, please read the user’s manual carefully
CAUTION

• Please avoid heavy impact and drop onto the ground when moving the product.

• Please do not cover the vents and holes on the enclosure and do not place the machine on a bed, sofa, or rug to ensure good ventilation. Otherwise, it will lead to overheating and reduce the service life.

• The screen of this product is made of glass. Please do not drop the screen to the ground. Keep away from injury if the screen is broken.

• Keep the product away from the heat source, such as the radiator, the water heater, the stoves, and other heating products.

• Avoid prolonged exposure to the sun as the LCD screen will be damaged.

• To avoid damaging the product, please do not take apart or repair the unit by yourself without the adjustable components in the unit.

• To maintain the LCD screen better, please notice the ways below to avoid scratches, discoloration, and other damages.
  1. Please refrain from using hard objects to hit the screen.
  2. Please do not force to wipe the screen.
  3. Please do not use chemical solutions to clean the screen.
  4. Please do not spray any detergent on the screen.
  5. Please do not write on the screen directly.
  6. Please do not stick it on the screen.
  7. Please simply wipe with a clean soft cloth and make sure no water on the screen.

• To protect the plastic cover better, please follow these ways below to avoid damage;
  1. Please do not use chemical solutions to clean the cover.
  2. Please keep away from volatile things.
  3. Please do not clean the case hard.
  4. Please simply wipe with a clean soft cloth and make sure no water on the cover.

Features

• IPS LCD panel, support 4K HDMI input and output UHD 4K 3840×2160p (30/29.97/25/24/23.98Hz) DCI 4K 4096×2160p (24Hz)
• Support 3D LUT Log to REC.709 and user 3D LUT upload
• The histogram is a quantitative tool to inspect the image brightness, to guide the exposure control
• Focus Assist (Focus edge can be Red, Green, or Blue)
• Embedded Audio
• Zebra and False Color function, convenient to guide the using light when shooting and the post production
• Check Field (Red, Green, Blue, Mono)
• Image Zoom-in function
• Anamorphic Mode
• Image Flip (H, V, H/V)
• Image Freeze
• Image Nine Grid, zoom one of the images to realize the full screen
• Pixel to Pixel
• Marker Types, Safe Frames and Center Marker
• Brightness, Contrast, Sharpness, Tint, Saturation, and Color Temp Adjustment.
• Earphone output
• DC8.4V power out to power your DSLR camera or mirrorless camera
• External sunshade, sunlight readable

Product Description

Front Panel

Back Panel

1.1 Button Instruction

Button| Function when OSD is not displayed| Function when OSD is displayed
---|---|---
＜| Decrease the volume| Decrease or adjust the value of the selected parameter
＞| Increase the volume| Increase or adjust the value of the selected parameter
MENU| Display OSD Main menu Custom button F1| Return to the previous OSD menu
F1/∨| Custom button F2| Select the next menu item
F2/∧| Custom button F2| Select the previous menu item
F3| Custom button F3| /
| Power On/Off button

1.2 Port Instruction (bottom)

DC OUT 8.4V: DC power output interface, polarity as the output power
Barrel output for powering your camera with a separately available DC coupler via an adaptor (like NP-FW50 Sony & LP-E6 Canon&DMW-BLF19 Panasonic).
: 3.5mm Earphone port output
USB UPGRADE: Firmware USB upgrade port, custom LUT files import
1.3 Port Instruction (left)

HDMI IN: V1.4, HDMI signal input, up to 4K@30Hz.
HDMI OUT: V1.4, HDMI signal output, up to 4K@30Hz.
DC IN 12V: DC power input interface, polarity as the input power
1.4 Power Supply Way

1. The rear cover of the monitor is equipped with an F970 and E6 dual-purpose battery plate, which is applicable to the F970 series of batteries and E6 series of batteries.
2. Barrel (5.5mm outer, 2.1mm inner) at the left side of the monitor, DC 7~24V Input.

• Sony F970 battery plate for the battery of Sony DV: Sony F970 F960 F950 F930 F770 F750 F730 F570 F550 F530 series
• LP-E6 battery plate for a battery of Canon DV: Canon LP-E6

Remark: It is recommended to use standard original F970 batteries.
Different specifications of the battery have different capabilities. The working time for the monitor will be different. Higher capability (working time) will be longer. Please take off the battery from the monitor if you don’t use the monitor for a long time.
1.5 Mount Points
(1) 1/4″ Screw Lock Installation
The 1/4 screw lock can be installed on the monitor (bottom, right side).●

1. Fasten the 1/4″ screw lock with the monitor.
2. Use 2 screws to fasten the the1/4″ screw lock and the monitor.

(2) Tilt Arm Mounting
The monitor secures your camera using the included Tilt Arm via shoe mount or 1/4″-20 thread. The Tilt Arm enables 180° of tilt for convenient monitoring at nearly any angle. A cold shoe on the Tilt Arm lets you secure equipment (like a microphone, LED light, or wireless receiver) that would otherwise be displaced from the camera’s accessory shoe.

1.6 Sunshade

Attach the Velcro (hook side) ① to the outside of the sunshade frame of the monitor, open the sunshade ③, and align the Velcro (loop side) on the inside of the sunshade with the Velcro (hook side) ② on the monitor sunshade frame, and then complete the sunshade installation ④.

Menu Operation Instruction

After correctly connecting to the power supply, the indicator will turn (Red), press to turn on monitor power, the indicator will be Yellow and then input HDMI signals, the indicator will turn Green from Yellow.
2.1 When the menu is not displayed, directly press the “<” or “>” button to adjust the volume or backlight. You can set the left and right buttons in the menu Left Right Key Set to set the volume or backlight.
2.2 Press the “MENU” button to enter OSD main menu, and press the “＜” or “＞” button to go through the secondary menu function.
2.3 Then press the “F1/∨” button to enter the secondary menu.
Press the “F1/∨” or “F2/∧” button to move and select the items in the secondary menu.
2.4 After selecting the items in the secondary menu, press the “＜” or “＞” button to adjust the item parameters.
2.5 Press the “MENU” button to confirm the item adjustment and exit the menu.

Menu Function Instruction

●

All Waves

| Off, On
After turning on, waveform, vector, histogram, and embedded audio will be shown.
---|---
Waveform| Off, RGB, Y, YUV
This essential feature assists with the calibration of professional video cameras. It shows the overall brightness of the image assisting the video professional in correcting exposure. The waveform feature also checks the evenness of the lighting when lighting a chromakey or background.
Vector| Off, On
Shows how saturated the image is and where the pixels in the image land on the color spectrum.
Histogram| Off, RGB1, Y, RGB2
Waves Trans.| Off, 25, 50, 75
Focus Assist| Off, On
By sharpening the edge of images to help photography for focusing operation.
Peaking Color| Red, Green, Blue
Due to the image color being colorful when shooting in natural light, the user may react to the edge of the single line not being too sensitive, at this time changing the auxiliary focal edge line color will improve the sensitivity of the image contour. It is convenient during filming to track in focus. The edge line color can be chosen according to the site situation to select red, green, and blue.
Embedded Audio| Off, On
The Audio Level Meters provide numerical indicators and headroom levels. The audio meter is green and will turn yellow when exceeds -20dB, and turn red when exceeds -9dB.
---|---
Over Exposure| Off, On
Exposure Level| IRE10 ～ IRE100
When exposure exceeds the preset value, the monitor screen appears the twill, it is to reflect the picture exposure conditions, so as to suggest the photographer adjust the aperture to obtain proper exposure.
Check Field| Off, Mono, Red, Green, Blue
To switch among colors, Mono, Red, Green, Blue
False Colors| Off, On
It is the analysis of the whole image brightness and displays False Color. It is convenient to guide using light when shooting and post-production.

●

Select the screen marker.
Center Marker| Off, On
---|---
Ratio Marker| Off, 4:3, 13:9, 14:9, 15:9, 16:9, 1.85:1, 2.35:1
Image display ratio marker.
Mark Color| Red, Green, Blue, Black, White
To select the above high contrast mark color according to a different image.
Mark Width| 1 ～ 7
Select the above mark color display width.
Modified Mark| 0 ～ 5
** Adjust the brightness of the image outside the tag line to highlight the inside tag line of the image.

●

Under the User , the Anamorphic nX can be customized.
Anamorphic nX| 1.20X~2.00X
Image Flip| Off, H Flip, V Flip, H_V Flip
OSD Flip| Off, On
Zoom Mode| Off, Mode1, Mode2
The Zoom All can be customized.
Zoom All| 0 ～ 500
Adjust the image to zoom in or zoom out.
L/R Zoom| 0 ～ 500
Adjust the proportion of the image Left and Right to Zoom In or Zoom Out.
U/D Zoom| 0 ～ 500
Adjust the proportion of the image Up and Down to Zoom In or Zoom Out.
---|---
Nine Grid Zoom| Off, On
Open the Nine Grid function to divide the image into nine grids, then turn on the Nine Grid Zoom function, select one of the screens by pressing the “<” or “>” key, and then press the “F1/∨” or “F2/∧” key zoom in to the full screen. Press the “F1/∨” or “F2/∧” key to exit the local zoom function. (To achieve this function, you need to turn on the Nine Grid function first, and it can only be operated by keys.)
Zoom| Off, 4X, 9X, 16X
Image Freeze| Off, On**

●

Lut Switch| OFF, ON
After the LUT Switch is turned on, you can use the Lut (SLOG2, SLOG3, LOGC, VLOG).
---|---
Lut Table| Show the 4 built-in Lut and the custom load Lut (up to 32）
Lut Import (USB)| After copying the 3D LUT file to the USB flash drive, then connecting the USB UPGRADE port via the USB adapter cable, press the “<” or “>” button in the Lut Import(USB) to import the 3D LUT file.
Color Temp.| 5600, 6500, 9300, User
Under the User , the red, green, and blue of the image can be adjusted.
Red| 0～255
---|---
Green| 0～255
Blue| 0～255
Backlight| 0 ～ 100
Pic. Mode| Standard, Mild, User, Dynamic
Under the User , you can adjust the image Brightness , Contrast , Saturation , and Sharpness.
Brightness| 0～100
Contrast| 10～100
Saturation| 0～100
Sharpness| 0～100
Tint| 0 ～ 100

●

Left Right Key Set| Volume, Backlight
You can set the Left Right Key Set as shortcut keys for volume or backlight adjustment. After setting, when the menu is not displayed, you can directly press the “<” or “>” key for quick adjustment.
---|---
Language| English, Español, Português, Français, Nederlands, Deutsch, русский язык
OSD Trans.| Off, Low, Middle, High
OSD Time| Off, 10Sec, 20Sec, 30Sec
No Signal| Blue Screen, Red Screen, Green Screen, Gray Screen, Black Screen, White Screen
Volume| 0 ～ 100
---|---
USB Upgrade| Copy the file to the USB flash drive, then connect the USB UPGRADE port via a USB adapter cable, and press the “>” button to confirm the upgrade. After the upgrade is complete, the monitor will automatically restart.
Reset| Press the “＞” button to confirm, back to the original setting .

●

F1/F2| Safe Frames, Check Field, Focus Assist, Aspect Ratio, Image Flip, Image Freeze, Histogram, False Colors, Over Exposure, Embedded Audio, Nine Grid, Zoom, Anamorphic, Waveform, Vector, Center Marker
To set the 2 shortcut custom buttons F1, F2, and F3on the panel.
e.g. When in the OSD menu “ ”, press the “＞” button to select F1 , press the “＜” or “＞” button to pop-up function items, and press the “＜” or “＞” button to select one of them, such as “Focus Assist”, and press “ MENU ” button to confirm. So when you exit the OSD menu, you could press F1 directly on the front of the panel to turn on the “Focus Assist” function.
Same setting for F2, F3
---|---

Technical Parameters

720p(60/59.94/50/30/29/25/24/23.98）
1080i(60/59.94/50）
1080p(60/59.94/50/30/29.97/25/24/24sF/23.98/23.98sF)
4K UHD 3840×2160p (30/29.97/25/24/23.98 Hz)
Input Voltage| DC: 7～24V
Power| ≦9W
Battery Plate| F970/ LP-E6 Dual-purpose Battery Plate
Install Way| 1/4-20 mount points (bottom, right)
Working| -20℃～55℃
Storage| -30℃～65℃
Unit Size| 142Lx87.2Hx27.5D (mm)
Unit Weight| 175g

Trouble Shooting

5.1 Only black and white or monochrome picture:

1. please check saturation, brightness & contrast adjustment.
2. Please check that “Check Field” is in the black, white, or monochrome image or other conditions.

5.2 NO Image after putting on the power

1. Check if the signal cable connecting is in good condition.
2. Check the signal cable connecting, and make sure to use the standard adapter to connect the monitor. If power is supplied by a battery, please check if the battery is fully charged.

5.3 Earphone No sound
Check if the Volume control does not open, press the volume button, and try to increase the volume.
■ If there are still other problems, please contact our related technologists.
★ As we are improving product features and product performance, so if there is any change in the specification without prior notice.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>