oceanic OCEABV1300B Steam Cleaner 10 In 1 User Manual

June 4, 2024
Oceanic

oceanic-logo

oceanic OCEABV1300B Steam Cleaner 10 In 1

oceanic-OCEABV1300B-Steam-Cleaner-10-In-1-product-
image

DESCRIPTION

Product description
  1. Handle
  2. Power cord storage hook
  3. Tube’s handle
  4. ON/OFF button
  5. Water tank cap
  6.  Bouton
  7. Water tank
  8. Steam setting knob
  9. Water inlet
  10. Light indicator
  11. Power cord (3m)
  12. Tube’s handle lock
  13. Main body
  14. Cleaning head lock
  15. Cleaning head
  16. Pivot
Parts description

oceanic-OCEABV1300B-Steam-Cleaner-10-In-1-2

  • A Main body
  • B Tube
  • C Handle
  • D Window squigee
  • E Small brush
  • F Medium brush
  • G Accessories connector H Angular spout
  • I Cleaning tool
  • J Small squigee
  • K Cup
  • L Microfiber mop
  • M Fabric
  • N Cleaning head
  • O Carpet slider

SET-UP

Unpacking the device and scrapping the packaging
Remove all packing material around the appliance and the protective elements inside the appliance compartments.

  • Packaging cardboard and sheets of paper are recyclable. They must be thrown in the collection bins provided for this purpose.

  • The materials bearing the symbol Rectangle are recyclable:

    • PE <= polyethylene; > PS <= polystyrene; > PE <= polypropylene; …
      This means that they can be recycled by depositors in appropriate collection containers.
  • the other packaging elements (adhesive, fasteners …) must be thrown away with household waste.

USING YOUR APPLIANCE

Assembling your appliance
Warning!: Before performing any of the following operations, make sure that the unit is turned off and unplugged from the power outlet. Also make sure the steam cleaner is cold and does not contain water.
Installing the handle

oceanic-OCEABV1300B-Steam-Cleaner-10-In-1-3

Insert the tube B into the handle C until you hear a click that will indicate that the assembly is correctly attached.
Insert the handle B (with the handle previously installed) into the main body until you hear the click of attachment
The handle can be removed from the broom for easier storage by pressing the release button 12.

  • Installing the cleaning head
    Insert the main body end into the N cleaning head until the assembly is properly secured.
    The cleaning head can be removed from the main body by pressing the release button on the top of the head.

  • Installing the microfiber mop
    The mop attaches easily to the cleaning head thanks to the pins on the latter. Just put the mop on the floor and then put the head of your steam cleaner on the microfibermop by pressing lightly.

  • Installing the carpet slider
    Put the carpet slider on the carpet to be cleaned then insert the cleaning head into the carpet slider. You can then proceed to the carpet clean steaming with the carpet slider help.

Using your appliance

  1. Fill the tank: Open the tank cap (5) by turning it anti-clockwise. Fill the tank with 330ml of water using the measuring cup.

  2. Connect the unit to a properly functioning outlet.

  3. The red light indicator will then light up. It shows that the device is heating up. If the signals do not light up, refer to the “self-help” section.

  4. The heating time is about 20 seconds. When the unit is ready for operation, a blue signal will light up in the tank and the unit will steam automatically.

  5.  When the tank is full, the unit can run continuously for about 20 minutes. When there is not enough water
    in the tank, the red light indicator (10) will light on on to indicate that the tank must be refilled.
    NOTE: If the unit turns off during or after the warm-up time, turn it on again. The unit will return to heating mode.
    WARNING ! Do not touch the broom head while cleaning. Risk of burns!

  6.  Adjust the steam intensity on button 8: turn clockwise to increase the pressure and counterclockwise to decrease it.

NOTE: Wait about 3 seconds for the steam flow to adjust to the requested power.
WARNING ! Risk of burns!
The steam cleaner has a wide angle of action that allows you to clean under furniture and reach every corner.

Using the steam cleaner without the tube

Press the button on the lower part of the handle and remove the main body A.
Install the accessory connector at the end of the main body.
Choose the appropriate accessory (refer to the accessories list) then insert it into the adapter and screw it in until it is properly fixed.

ACCESSORIES USES ADVICES

! WARNING ! Before cleaning any electrical appliance, check and follow the instructions given by the manufacturer.

ACCESSORY| ACCESSORIES THAT MUST BE CONNECTED TO THE ACCESSORIES CONNECTOR| SUGGESTED USE
Squigee|
| Glass shower doors, mirrors, glass, remove soap scum and grime.
Hard brushes| ****


| Oven, microwave, stove, showers,
bathtubs, faucet, tile, toys, refrigerators, etc.
Angular spout| | around faucets, joints, microwaves, sinks, areas inlaid with grime
Cleaning tool|
| Clean the joint.
Small squigee| | Racer burned him on the dishes, the grime and the grease.
Removes hard-to-remove substances, such as in ovens
Fabric|
| For fabrics, clothes, tablecloth etc …
Microfiber mop| ****| For general cleaning of floors and carpets

CLEANING AND MAINTENANCE

Warning: Before cleaning, unplug the appliance and allow it to cool.

  • Unplug the appliance from the power socket.
  • Clean the outside surface with a soft cloth. You can also clean with a sponge soaked in a neutral Ph product, remember to dry the unit with a dry, clean cloth.
  • Never immerse the appliance.

How to clean the inside of the water tank

To clean the lime scales that settles inside of the water tank, mix two tablespoons of white vinegar with the water from the tank (full), close it, and shake. BE SURE THAT THE APPLIANCE IS TURNED OFF.

Procedure for cleaning scales:
If your appliance starts to produce a weaker steam jet than usual, it may need descaling. Scales may develop over time on metal parts, and decrease its performance.
It is therefore necessary to remove scales regularly, every 25 or 50 uses, or even once a month, depending on the hardness of the water and the frequency with which you use your device.

  1. Prepare a mixture: 1/3 of white vinegar and 2/3 of still water, and pour into the tank.

  2.  Orient your device to a position where the vapor can escape freely, without touching the ground or other surfaces. Plug in the device, and turn it on by pressing the power button. Then produce steam, so that the cleaner mixture circulates in the device.
    Continue to steam until the steam jet returns to normal.

  3. Refill the tank with water only, and produce steam until the tank is empty, to rinse.

WARNING
Do not leave the appliance unattended during the cleaning phase or while it is running.
Perform a test on an isolated and suitable area, after each cleaning, to ensure that no residue remains inside.

Cleaning the accessories:
You may notice, over time, that less and less steam comes out of your appliance accessories during use due to the high mineral content of your water.
This may be due to the calcium that settles and accumulates in the beak of your device.

How to clean calcium deposits?
We recommend the use of a lubricating spray. Spread one or two lubricant pressures inside the mouthpiece nozzle and inside the accessory. Then fill the water tank, plug the faulty accessory, and turn on the device. Then send a jet of continuous steam, following the precautions for use, through the faulty accessory, for several minutes to remove deposits. Once the walls have been cleaned, perform a test on an isolated and suitable area, to ensure that no residue remains inside.
Do not try to repair this unit yourself. Any maintenance requiring disassembly must be performed by a qualified technician.
Cleaning the microfiber mop:

  • Machine washable. Use of mild detergent strongly recommended.
  • For best results, let the mop lay flat.
  • IMPORTANT: Allow the unit to cool before performing any maintenance or detection of a problem. IMPORTANT: Never use JAVEL or equivalent products to clean the microfiber cloth.

WARNING: Do not use any toxic, solvent, industrial or harsh cleaning products to avoid damaging your appliance.

Issues and solutions

ISSUES REASONS SOLUTIONS
No steam or reduced steam jet Water tank may be empty Refill the water tank
The appliance spout may be clogged Clean the spout
The appliance is not properly plugged in Unplug and replug the appliance
The steam knob is not turned on Turn on the steam knob
The steam knob is on the MIN setting Turn the steam knob and set it on the

max level
The appliance do not switch on| The electric board is off / fuse is grilled| Replace the fuse or restart the electric board
Appliance is unplugged| Plug in the appliance
The appliance fuse is broken| Contact the after sales service

TECHNICAL INFORMATION

Model OCEABV1300B
Adapter input 220-240V ~ 50Hz
Power 1300W
IP (Ingress Protection) level IPX4
Autonomy 25min with steam low setting

18min with steam high setting

WARRANTY

The warranty does not cover product wear parts, neither problems or damage resulting from:

  1. superficial damage due to normal wear of the product
  2. defects or damage due to contact of the product with food or liquids, and due to corrosion caused by rust;
  3. any incident, abuse, misuse, modification, unauthorized removal or repair;
  4. any improper maintenance operation not in accordance with product instructions or connection to improper voltage use;
  5.  any use of accessories not supplied or approved by CONTINENTAL EDISON.
    The warranty will be cancelled in case of elimination of the rating label and/or the serial number product.

ENVIRONMENT AND RECYCLING

European Directive 2012/19/EU on Waste Electrical and Electronic Equipment
(WEEE), requires that old household electrical appliances must not be disposed of in the normal unsorted municipal waste stream. Old appliances must be collected separately in order to optimize the recovery and recycling of the materials they contain and reduce the impact on human health and the environment.
The crossed out “wheeled bin” symbol on the product reminds you of your obligation, that when you dispose of the appliance it must be separately collected. Consumers should contact their local authority or retailer for information concerning the correct disposal of their old appliance. As a responsible retailer, we care about the environment
As such we urge you to follow the correct disposal procedure for the product, packaging materials and if applicable, accessories and batteries. This will help conserve natural resources and ensure that the materials are recycled in a manner that protects health and the environment.
You must follow laws and regulations about disposal. Waste electrical products and batteries must be disposed of separately from household waste when the product reaches the end of its life.
Contact the store where you bought the product and your local authority to learn about disposal and recycling.
This manual is available on the following website: http://pieces- detachees.sogedis.fr/

www.oceanic.eu

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Oceanic User Manuals

Related Manuals