Oceanic OCEAMIXF66 Kitchen Basin Mixer Instructions
- October 27, 2023
- Oceanic
Table of Contents
Oceanic OCEAMIXF66 Kitchen Basin Mixer Instructions
Terms of use
– Minimum pressure: 1 bar/ maximum: 5 bars (beyond, install a pressure
reducer).
– Make sure that the supply pressures for hot and cold water are well
balanced.
– Recommended temperature for adjusting the hot water installation: 60 ° C
(maximum: 80 ° C)
– Minimum cold water temperature: 10 ° C (a lower temperature would damage
your tap). Very hard water is heavily loaded with lime stone which accelerates
the scaling of your taps.
Treating your water with a softener helps protect your facilities and extend
the life of your equipment.
Unpacking
Before handling, make sure that all components are present and visually check
their good surface condition.
When mounting and/ or installing, make sure that by respecting any
instructions, you do not experience any difficulty in screwing, tightening,
fitting.
Installation
– During assembly, the connection hoses must not be damaged (cutter blow when
unpacking), or bent, pinched or twisted.
Otherwise, pressure builds up eventually breaking them open, which can cause
water damage. Also make sure that the supply hoses are never in contact with
any drawers in the cabinet installed under the sink or basin, otherwise a
shearing effect may result which could cause the hose to burst.
– For the fitting to your installation: tighten the fitting or the nuts
securely using a wrench. Avoid excessive tightening, which could break the
thread or cause micro cracks which could expand over time and the pressure of
the water and cause a leak.
– When using for the first time, make sure that your product is working (in
particular that the water flows at the right temperature and with the right
flow rate).
NB: For the models OCEAMIX67 / OCEAMIX69 follow the specific instructions
(see here after) as they present an extractible flexible.
Maintenance/ cleaning
The proper functioning of the tap therefore requires regular maintenance.
We therefore recommend:
– never use abrasive or corrosive products. These aggressive products attack
coatings and tarnish your faucet.
– clean the chrome surface using a mild soap or soapy water and a soft cloth
making sure to rinse well with clean water after cleaning.
– regularly clean the cartridge/ tap head (at least once a year), using of a
solution of water and white vinegar (let stand overnight).
– clean the aerator-aerator by soaking it in a water/ white vinegar solution.
– activate the moving parts (inverter, lever, crosspiece, pull tab) at least
once per week to ensure smooth operation over time.
Product Installation
Flexible Connecting Pipes
Care must be taken when connecting the flexible connection pipes to the
household pipework to ensure they do not bend sharply and kink or twist.
See below for recommended ways to fit the flexible connecting pipes.
⚠ Important: Failure to follow these guidelines may result in poor performance and damage to the flexible connecting pipes.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>