Oceanic SYSTEM OCEABHE1500B Electronic Oil Radiator User Manual

User manual

ELECTRONIC OIL RADIATOR
OCEABHE1500B / OCEABHE2000B / OCEABHE2500B

This product is only suitable for well insulated spaces or occasional use.

SAFETY WARNINGS

Please read this manual carefully before use and keep it for future use.

1. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

2. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

3. The appliance must not be immersed.

4. Children of less than 3 years should be kept away unless continuously supervised.

5. Children aged from 3 years and less than 8 years shall only switch on/off the appliance provided that it has been placed or installed in its intended normal operating position and they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children aged from 3 years and less than 8 years shall not plug in, regulate and clean the appliance or perform user maintenance.

6. CAUTION — Some parts of this product can become very hot and cause burns. Particular attention has to be given where children and vulnerable people are present.

7. The heater must not be located immediately below a socket-outlet.

8. The appliance is for household use only. Do not use outdoors.

9. WARNINGS: In order to avoid overheating, do not cover the heater.

10. Only used as portable appliance. ­
    • Do not use this heater in the immediate surroundings of a bath, a shower or a swimming pool; ­
    • Do not use this heater if it has been dropped; ­
    • Do not use if there are visible signs of damage to the heater; ­
    • Use this heater on a horizontal and stable surface, or fix it to the wall, as applicable

11. WARNING: Do not use this heater in small rooms when they are occupied by persons not capable of leaving the room on their own, unless constant supervision is provided.

12. W• ARNING: To reduce the risk of fire, keep textiles, curtains, or any other flammable material a minimum distance of 1 m from the air outlet.

13. This heater is filled with a precise quantity of special oil. Repairs requiring opening of the oil container are only to be made by the manufacturer or his service agent who should be contacted if there is an oil leak.

14. When scrapping the heater, follow the regulations concerning the disposal of oil.

15. If you notice an oil leak, do not use the radiator before repair. Contact the after-sales service.

16. This heater cannot achieve accurate temperature control of the environment, and thus cannot be used as insulation device for storage environment, items, animals and plants.

SAFETY PRECAUTIONS

• Before connecting the appliance to the mains supply, please check if the voltage indicated on the appliance corresponds with the main voltage in your home.
• Do not use the device in areas where there is a risk of fire and near combustible materials.
• Never use the unit in places where are not even or unstable.
• Do not insert and pull out the plug with wet hand, as this may cause  electrical shock.
• Be sure to pull out the plug from an outlet when not in use and before cleaning.
• The heater must only be used in the upright position. Never use when the unit is fallen over.
• The unit should be far away from the object flammable or easy deform during uses.

SUPPORT INSTALLATION

1. Turn the heater upside down.
2. As shown in figure 1, align the mounting hole of a set of caster assembly and install it on the screw of the caster pad plate at the end of the radiator fin, and the other caster assembly is aligned to the screws mounted at the bottom of the control box.
3. As shown in figure 2, two sets of caster components are tightened with four butterfly nuts. Install solid and then put the heater in place on the ground.

DESCRIPTION

OPERATING INSTRUCTION

[Inspection before start]

1. The power cord shall not be damaged or fractured.
2. Please verify the rated current of the power socket is in line with the requirements in the table above and is equipped with a safety grounding device before use; otherwise, replace the socket.

[Operating Instructions]
< Work/Standby>: Plug in the power, the buzzer will “beep” for a long time, press the power key “ ” to enter the heating working state, and then press the power key “ ” to enter the standby state.

< Gear selection>: For work status, press “ ” key to select one of work modes such as high gear, medium gear and low gear. If using the remote control, press the “ ” to select working mode.

< Temperature Setting>: Under the working status, press and hold the “ + ” key or “ – “key to set the temperature, press and hold the “ + “key or the “ – ” key to quickly set the temperature; after setting the temperature, have non-operation for 5 seconds, exit the temperature setting screen.

< Setting the timer>: In standby mode, press the timer button to enter the timer screen. Press up or down to set the scheduled time. A short press on the control panel allows you to slowly increase or decrease the time on the screen; a long press allows you to quickly increase or decrease the time. The time you choose will be the timer the heat switches from standby to working mode and begins to produce heat. When your heater starts according to the timer; it will heat to the last programmed temperature before standby.
When your heater is producing heat, press the timer button to enter the scheduling standby scree. Press up or down to set the standby scheduled time. A short press allows you to slowly increase or decrease the time on the screen; a long press allows you to increase or decrease the time at a quicker rate. The time you choose will be the time the heater reverts to standby mode and stops producing heat. After five seconds of inactivity, that standby scheduling screen will revert to normal.

< Memory function>: When started up the machine again and it will operate according to the status before the last standby.
< Safety protection function>: When the indoor ambient temperature Th exceeds 50°C under the standby or working state, the heating elements shut down, the buzzer prompts 10 long beeps, the digital screen displays “FF” and flashes for 75 seconds. As long as there is protection, even if the ambient temperature is less than 50°C, the running or operation cannot be resumed, and the operation can only be performed after the power is turned off and on again.

< Shut down>: Under the working state, press the power key “ ” on the control panel to enter the standby state, unplug the power cord, wait for the whole machine to cool, and place the heater stably.

USING THE REMOTE CONTROL

Batteries type: 2pcs AAA-LR03 1,5V (battery not included) Instructions for remote-control unit: Button function are basically consistent with the operation panel of the body.

| ON/OFF key
---|---
| Function key
| “” key
| “” key
| Timer key

CARE AND CLEANING

1. Before cleaning the appliance, switch off the appliance supply and wait until it is completely cooled.
2. Never immerse the appliance into water.
3. Allow the appliance to cool before touching or cleaning.
4. The electric heater should be cleaned regularly to wipe out the dust on the surface of flanges. As this may influence the radiating efficiency.
5. . Disconnect electricity supply and allow radiator to cool, wipe out dust with a soft damp cloth. Do not use detergent or abrasives.
6. Dry completely before use.
7. Do not scrap the surfaces of flanges with sharp hard tools, to avoid surfaces getting rusty, because of damage of the paint coat.

WARRANTY TERMS

Your device is guaranteed by the manufacturer for a period of 24 months from the date of purchase (Use the dated invoice as proof).

EXCLUSIONS:
The warranty does not cover wear parts of the product, or problems or damage resulting from:

1. surface damage due to normal product wear
2. defects or deterioration due to contact of the product with food or liquids and due to corrosion caused by rust
3. any incident, abuse, misuse, unauthorized modification, disassembly or repair
4. improper maintenance, use not in accordance with product instructions, or connection to incorrect voltage
5. any use of accessories not supplied or approved by the manufacturer. Information: The warranty will be invalidated if the nameplate and/or the serial number of the product are missing.

REPAIR SERVICES

In the event of a malfunction during the period of the manufacturer’s warranty: any request for support must be made to the professional retailer from whom you purchased your product. It is therefore guaranteed for 2 years from the date of purchase. Keep your receipt which will serve as proof of purchase.
In the event of a malfunction, you must return your product to your point of sale.

TECHNICAL SPECIFICATION

Model identifier(s): NY1507-20MR (Ref: OCEABHE1500B)

heaters only (select one)
Nominal heat output| Pnom| 0,6| kW| | manual heat charge control, with integrated thermostat| [no]
Minimum heat output (indicative)| Pmn| 0,6| kW| | manual heat charge control with room and/or outdoor temperature feedback| [no]
Maximum
continuous heat output| Pmax,c| 0,6| kW| | electronic heat charge control with room and/or outdoor temperature feedback| [no]
Auxiliary electricity consumption| | | | | fan assisted heat output| [no]
At nominal heat output| elmax.| 0,000| kW| | Type of heat output/room temperature control (select one)
At minimum heat output| eh.,| 0,000| kW| | single stage heat output and no room temperature control| [no]
In standby mode| Ow| 0,000| kW| | Two or more manual stages, no room temperature control| [no]
| | with mechanic thermostat room temperature control| [no]
| | with electronic room temperature control| [Yes]
| | electronic room temperature control plus day timer| [no]
| | electronic room temperature control plus week timer| [no]
| | Other control options (multiple selections possible)**
| | room temperature control, with presence detection| [no]
| | room temperature control, with open window detection| [no]
| | with distance control option| [no]
| | with adaptive start control| [no]
| | with working time limitation| [Yes]
| | with black bulb sensor| [no]
Contact details| OCEANIC
120-126 quai de Bacalan
CS 11584
33000 BORDEAUX

Model identifier(s): NY2009-20MR (Ref: OCEABHE2000B)

heaters only (select one)
Nominal heat output| Pnom| co| kW| | manual heat charge control, with integrated thermostat| [no]
Minimum heat output (indicative)| Pm,,,| 0,7| kW| | manual heat charge control with room and/or outdoor temperature feedback| [no]
Maximum
continuous heat output| Pmax,c| 0,8| kW| | electronic heat charge control with room and/or outdoor temperature feedback| [no]
Auxiliary electricity consumption| | | | | fan assisted heat output| [no]
At nominal heat output| elmax| 0,000| kW| | Type of heat output/room temperature control (select one)
At minimum heat output| elmin| 0,000| kW| | single stage heat output and no room temperature control| [no]
In standby mode| elSB| 0,000| kW| | Two or more manual stages, no room temperature control| [no]
| | with mechanic thermostat room temperature control| [no]
| | with electronic room temperature control| [Yes]
| | electronic room temperature control plus day timer| [no]
| | electronic room temperature control plus week timer| [no]
| | Other control options (multiple selections possible)**
| | room temperature control, with presence detection| [no]
| | room temperature control, with open window detection| [no]
| | with distance control option| [no]
| | with adaptive start control| [no]
| | with working time limitation| [Yes]
| | with black bulb sensor| [no]
Contact details| OCEANIC
120-126 quai de Bacalan
CS 11584
33000 BORDEAUX

Model identifier(s): NY2513-20MR (Ref: OCEABHE2500B)

heaters only (select one)**
Nominal heat output| Pnom| 1,2| kW| | manual heat charge control, with integrated thermostat| [no]
Minimum heat output (indicative)| Pmin| 1,0| kW| | manual heat charge control with room and/or outdoor temperature feedback| [no]
Maximum
continuous heat output| Pmax,c| 1,2| kW| | electronic heat charge control with room and/or outdoor temperature feedback| [no]
Auxiliary electricity consumption| | | | | fan assisted heat output| [no]
At nominal heat output| elmax| 0,000| kW| | Type of heat output/room temperature control (select one)
At minimum heat output| elmin| 0,000| kw| | single stage heat output and no room temperature control| [no]
In standby mode| elSB| 0,000| kW| | Two or more manual stages, no room temperature control| [no]
| | with mechanic thermostat room temperature control| [no]
| | with electronic room temperature control| [Yes]
| | electronic room temperature control plus day timer| [no]
| | electronic room temperature control plus week timer| [no]
| | Other control options (multiple selections possible)
| | room temperature control, with presence detection| [no]
| | room temperature control, with open
window detection| [no]
| | with distance control option| [no]
| | with adaptive start control| [no]
| | with working time limitation| [Yes]
| | with black bulb sensor| [no]
Contact details| OCEANIC
120-126 quai de Bacalan
CS 11584
33000 BORDEAUX

CORRECT DISPOSAL OF THIS PRODUCT

This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.

OCEANIC
120-126 Quai de Bacalan
CS 11584
33000 Bordeaux

IMPORT BY:
A.M.C.
123, QUAI JULES GUESDE
94400 VITRY SUR SEINE
France

www.oceanic.eu

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>