OPT7 B00ZJV5BYK Aura Pro Boat Interior LED Lighting Kit Installation Guide
- June 6, 2024
- OPT7
Table of Contents
OPT7 B00ZJV5BYK Aura Pro Boat Interior LED Lighting Kit
COMPONENTS
INSTALLATION
STEP 1
Inspect kit to ensure all contents was included.
STEP 2
Decide where to locate the control box and light trips. Ensure wiring has
enough length for light strips to be installed in desired location.
OPTION A
OPTION B
STEP 3
Scan the QR code on the back of the control box to download the app.
STEP 4
Secure Control box in desired location with Velcro or zipties.
- The control box is NOT waterproof. Tuck it away from the elements.
STEP 5
Secure the light strips using the zip ties to tie all the wiring away from the moving components.
IMPORTANT:
The LED connectors are not waterproof. You will need to use HEAT SHRINK TUBE
(not included) or ELECTRICAL TAPE around the LED connectors to ensure the
longevity of the lighting kit.
STEP 6
Open the OPT7 AURA App, pair your smart device to the control box, and pick
your desired color!
OPT 7 AURA APP
QR CODE TO DOWNLOAD
- Colors
- Modes
- Door Assist
- Support
- Ability to control up to 4 devices at once
DISCLAIMER
OPT7 Lighting is not liable for damages or personal injuries while installing
this product. The Installation Guide is intended as assistance to reduce setup
time. OPT7 Lighting assumes no responsibility for improper installation.
If you are unfamiliar with your vehicle or inexperienced with aftermarket
upgrades, please seek professional assistance.
NEED SUPPORT?
Scan for tutorial videos, troubleshooting tips, and more.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>