HYUNDAI Robot Vacuum Cleaner H-VCRQ90 User Manual

ROBOT VACUUM CLEANER
INSTRUCTION MANUAL
H-VCRQ90

DESCRIPTION

1. Control button
2. Upper cover
3. Light indicator
4. Central wheel
5. Vacuum cleaner charging contacts
6. Side brushes
7. Battery cabinet
8. UV-lamp
9. Side wheels
10. Round brush
11. Switch
12. Dust bin release button
13. Dust container cover
14. Dust container| 15. HEPA filter
16. Charging base
17. Charging light indicator
18. Charging station adaptor connector
19. Charging station charging contacts
20. Mopping cloth
21. Adaptor
22. Cleaning brush
23. Remote control
24. Infrared sensor
25. Anti-falling side sensors
26. Intake grate
---|---

AC 100-240 V ~ 50 Hz 0.5 A
DC 19 V **600 mA| 26 W**| 3.2 / 3.5 kg| mm
---|---|---|---

IMPORTANT SAFEGUARDS

• Read this instruction manual carefully to prevent any unit damage or injure when using.
• When using this appliance, basic precautions should always be followed:
• Before the first use of the appliance check that the voltage indicated on the rating label corresponds to the mains voltage in your home.
• For home use only. Do not use it for industrial purposes.
• To reduce the risk of electric shock, do not use outdoors or on wet surfaces. Do not immerse the unit or cord in any liquids.
• To avoid deforming of plastic components of the appliance or fire accident, never leave the appliance exposed to direct sunlight or near any heater.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliances by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• Never use the vacuum cleaner without filters.
• Do not attempt to repair, adjust or replace parts in the appliance. Repair the malfunctioning appliance in the nearest service center.
• If the product has been exposed to temperatures below 0ºC for some time it should be kept at room temperature for at least 2 hours before turning it on.
•  The manufacturer reserves the right to introduce minor changes into the product design without prior notice, unless such changes influence significantly the product safety, performance, and functions.
• Date of production is indicated on the unit and/or on the packing materials and in accompanying documents.
• Use this product in temperature from 0℃ to 40℃
• Do not sit on top of this product or attach an object on the top of it. Beware of children or pets while the product is in operation.
• Never use the product to clean up combustible or highly volatile liquids such as gasoline.
• While the product is in operation, make sure all doors leading outside are closed.
• Charging adaptor is for indoor use only.
• Do not recharge the product if the battery cord or plug is damaged.
• Never touch the charger, plug, or cable with damped hands.
•  Please take out the battery when it is not in use for a long time.
• The battery is to be disposed of safely.

Proper use

• This device is designed for vacuuming up normal house dust. It is only intended for private indoor use and not suitable for commercial application.

Before first use

• Before you can use the device, you must:
•  unpack the product contents and remove all transport and packaging elements,
• insert batteries in the remote control,
• fi tting the side brushes,
• set up the charging station,
•  charge the device’s rechargeable battery.

Batteries inserted to remote control

• Push battery compartment covers on the backside of the remote control to open the battery compartment.
• Insert the batteries into the compartment observing the polarity (AAA batteries excluding from the set).
• Push the battery cover back into the remote until it clicks.

Side brushes assembling

• Place the device upside down on the floor or table
• Insert the side brush with the letter R into the hole with the letter R
• Insert the side brush with the letter L into the hole with the letter L
•  If the brushes are properly installed, a click should sound

Charging battery station

•  For battery charging, the device’s charge contacts and the charging station must always be clean. Wipe them with a soft dry cloth from time to time to achieve it.
• Install the charging station on a clean, level floor, back to the wall near the power socket.
• There should be no obstacles on the way of the device to the charging station. There should be 1.5-2 meters of free space, without furniture and other items before the charging station. There should be no reflective surfaces (e.g. mirrors) behind the charging station.
• Connect the adapter to the charging station, plug the adapter to the power socket.

Battery charging

• Fully discharge and re-charge the battery every few months.
• It takes about 12 hours to charge the battery before the device is turned on for the first time, or if the device has not been used for a long time, and 3-4hours for the next charging. The battery will be charged up to the maximum level after 2-3 cycles of full charge and discharge.
•  If the device is completely discharged and cannot return to the charging station itself, put it on the charging station manually.

Charging from charging station

• The device returns to the charging station when the battery charge almost runs down, where the battery will be recharged automatically. The charging station should be connected with a power socket to do it.
• In case the device cannot find the charging station itself (e.g the room is very big or there is some obstacle on its way), you should help it. Use the direction buttons on the remote control to direct the robot to the charging station or put it on the charging station manually.
• The light indicator is orange when the device is charging, and green when the device is fully charged

Operation

Preparation

• The device cannot be used for long-pile carpets
• Remove all objects which may get inside the appliance or cause obstruction from the floor before work starts.
• Check no wires, cables, curtain brushes, or bags are one the way of the device.
• Remove all items that may be dropped by the appliance (e.g. vases, small table lamps, decorative items)
• The device can pass the way between two objects if the distance between them is at least 40 cm.
• The appliance may get stuck under pieces of furniture if they have a low fit. Block his way with a pot of flower (for example) to avoid it.

Application setup

•  Make sure your smartphone or tablet is connected to 4G, Wi-Fi Internet.
• Make sure your smartphone or tablet runs on iOS 8.0 (or higher) or Android 4.4 (or higher).
•  Make sure your router’s signal is within the 2.4 GHz range.
• Make sure your smartphone and robot vacuum cleaner has a WLAN signal.
• Make sure the robot vacuum cleaner is fully charged and the base is connected to the network.
• Scan the below QR-code to download and install the “Smart Life” application.

https://smartapp.tuya.com/smartlife

• Open the application and sign in.
• Add a device by searching the “Robot vacuum cleaner” icon.

While in standby mode, press and hold the start button on the vacuum cleaner for 3 seconds. When the device sounds 2 times, release it. The light indicator will flash when enters network configuration mode.

|
---|---

• After a successful vacuum cleaner adding to the application, you can control the device with your smartphone.
• If you have problems with application installing or device connecting to app, please refer to the “Frequently asked questions” section in the app.

Device operation

• The device has a “memory card” function, which helps to remember cleaned areas and not to move over them again.
• Press the switch on the backside of the device, the device will click, turn on and go into standby mode, light indicator becomes blue.
• Press the control button on the top panel and the vacuum cleaner will start working in standard mode.
• Press the control button once again to pause the device
• Press and hold the control button on pause mode to return the vacuum cleaner to the charging station.
• Use the remote control for operating modes regulation and device control.

Remote control

Switch on button
The button is used to start the operation.

Smart cleaning button. The device moves in a zig-zag direction by default.

Return to auto charging button
Use this button to activate the charging mode from the charging station.

Movement forward
This button starts the moving of the button forward. This button is also used for adjusting the cleaning schedule or setting the current time

Movement back
This button rotates the machine 180 degrees, and then into standby mode.
This button is also used for adjusting the cleaning schedule or setting the current time

Movement to the right
This button starts moving to the right. This button is also used to switch from hours to minutes
Movement to the left
This button starts moving to the left. This button is also used to switch from hours to minutes
This button is used to pause and restart the device from the pause. Also this button saves the preset settings

Suction power setting button
This button allows you to change the suction force: from normal suction to a high sunction level.
Clock setting button
Press the button to enter the Clock setting button with help of buttons to set the time. Press the button to confirm the setting.
Single room cleaning button
Close the door of the single room, which you are going to clean, and press the button.
Cleaning schedule setting button

Press the button when the device is on pause mode, enter to the cleaning start time setting. Set the time using
buttons for cleaning start time .
Edge cleaning button
Press the button to start edges cleaning.

• This function is not available for the H-VCRQ90 model.

Mopping cloth use

•  Mopping cloth for wet floor cleaning is in a kit.
• Attach wet mopping cloth with help of Velcro to devise bottom
• Follow all the above-described steps to turn on the device.

UV-lamp

• UV-lamp for destroying pathogenic bacteria during cleaning is on the back of the device.
• NOTICE: If the UV lamp is broken, turn off the device. Do not use the device with a broken UV lamp. Do not use a vacuum cleaner to clean the UV-lamp fragments. Put the fragments in a plastic bag and dispose of them in accordance with the instructions of the local authority. To replace the UV lamp, contact a service center.

Disposal of the UV- lamp

• Consult with your local authority for proper disposal and recycling of old UV lamps.
• UV-lamp contains mercury. Do not throw the lamps in the usual trash. Parts containing mercury must be disposed of in accordance with the instructions of the local authority.

Cleaning and maintenance

ATTENTION!

• The device must be disconnected to the mains and completely switched off for cleaning
  and maintenance

• Wipe the body with a wet cloth if it is necessary.

•  Only the dust bin may be rinsed out. The device itself, the filters, or the remote control may not be immersed into the water or in other liquids. Make sure that all parts are completely dry before you place the dust bin back to the device!

•  None of the parts of the robotic vacuum cleaner are suitable for cleaning in the washing machine or dishwasher!

•  Do not use any corrosive or abrasive cleaners for the device cleaning. They can damage the body’s surface.

•  Cleaning the side brushes

•  The debris or hair should be removed. It is highly recommended to clean the brushes after 4-5 cleanings.

Dust container cleaning

• Press the dust container release button to separate is from the body.
•  Open the container and empty it to the dust bin
• Place the dust container back.

Do not in any case open the rechargeable battery pack!

• To take the rechargeable battery out of the device, please follow the steps below:
•  Loosen the two screws, reach into the recess, and fold the cover of the rechargeable battery compartment up.
• Pull the rechargeable battery pack up and disconnect the plugged connection by pushing on the catch.
• Dispose of the rechargeable battery in accordance with the legal regulation for battery disposal.
• If you would like to insert a new rechargeable battery in the device, connect the plugs and place it in the rechargeable battery compartment. Close the cover of the rechargeable.

Troubleshooting

Repeated backward movement or constant change of direction after the device has started working| Anti-falling sensors are dirty| Wipe the bottom of the appliance
The transparent parts of sensors are dirty| Wipe the bottom of the appliance
The device does not work effectively, there is a loud noise| Side brushes are blocked or dirty| Clean the brushes
The dust collection container is full| Empty the dust collection container
Filter blocked by debris/dust| Clean the filter
The remote control does not work| Batteries are inserted into the remote control
without observing the polarity, or the battery charge has over| Reset the batteries, observe the polarity, or replace the batteries with new ones
The battery is low| Charge the device
The remote control is used outside the specified limits of the infrared signal| Come closer to the device
The device does not work in the selected mode| Insufficient charge in the battery of the device
causes it to automatically return to charging| Charge the device before using it
| Anti-falling sensors are dirty| Wipe the lower part of the device
The device is falling| |
---|---|---
The work area has reflective surfaces or recesses less than 8 cm| Change the work area
The device cannot detect the base| Obstacles on the way to the base| Remove obstacles on the way to the base
The base is not connected to the power| Connect the base to an electrical outlet
The adapter is damaged| Replace the adapter
The base is damaged| Replace the base
The battery is damaged| Replace the battery
The glow of the UV lamp is not visible in the UV lamp window| The UV lamp is broken| Contact a service center

The symbol on the unit, packing materials, and/or documentation means used electrical and electronic units should not be tossed in the garbage with ordinary household garbage. These units should be passed to a special receiving point.
The symbol on the unit, packing materials, and/or documentation means the battery used in this product not be tossed in the garbage with ordinary household garbage.
For additional information about the actual system of the garbage collection, address to the local authority.
Valid utilization will help to save valuable resources and avoid negative work on the public health and environment which happens with incorrect using garbage.

www.hyundai-home.ru

Manufactured/Distributed by Home Electronics Limited, China
Delivery and after service shall only be covered within the Russian Federation, Republic of Belarus, and the Republic of Kazakhstan
Licensed by Hyundai Corporation Holdings, Korea
Made in China

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>