Chargers C80 Wireless Car FM Transmitter User Manual

June 6, 2024
Chargers

C80 Wireless Car Fm Transmitter
User Manual

Thank you for purchasing this product. For the optimum operation, please read this manual carefully before using it.

Specificatons

Product size: 5640103mm
Product weight: 55g
Product color: Black
Wireless version: V 5.1
Frequency range: 88.1-107.9MHz
input voltage :DC 12-24V
Dual-port output current QC3.0+type-C PD 20W

Package Content

1 X FM Transmitter
1 X User Manual

Product Details

  1.  LED Display

  2. Type-C PD20W

  3. QC 3.0 Charge

  4. LED light

  5. a. Press once to auto-search
    b. Press twice to show the frequency number
    c. Press and hold for 3-5 seconds to turn off

  6.  a. Answer/Hang-up/ Call back the phone
    b. Pause/Play music
    c. Press and hold for 5 seconds to activate the phone
    voice assistance, such as SIRI&Google assistance.

  7.  Microphone

  8. Last song

  9. Next Song

  10. Rotatory Knob
    a. Rotate right volume +/FM+
    b. Rotate letvolume -/FM-

How to Install

  1. Start the car, insert the FM transmitter into the cigarette lighter. The LED display will keep flashing and it will show the car voltage first, then show“bt”(Bluetooth). If not,  please press and hold the button“⑤”( ) for 5 seconds to turn it on.

  2. Activate your phone’s Bluetooth and select “C80” to connect. The display will stop flashing once it is connected succe ssfully.

  3. Auto Mode 1:
    Press button“⑤” ( ) to automatically search for a blank FM frequency. When the search stops, please adjust the FM frequency of the car radio and tune it to the same one shown on the FM transmitter. You can play music when both of the frequencies are paired. If you are not satsfied with the auto search, you can try to search a blank frequency manually.

Manual Mode 2:
a.Tune your car FM radio to a blank FM frequency and frequency is fine as long as it is blank, NOT in use (no music, no broadcast). Please note that you should set the car  radio to the mode of
” Manual Search”. The radio will skip the blank FM station automatically if it is under the mode of “Auto Search”.
b.Pair the FM frequency of the transmitter with the same one of the car radio. Press button “⑤” ( ) twice, the display will show the frequency number and keep flashing, then you can rotate button “⑩” let or right to adjust its frequency.
You can play music when both of the frequencies are paired.

Bluetooth Pair

Activate your phone’s Bluetooth function and select “C80” to connect. It usually will connect automatically. Please enter “0000”if a password is required.

Making Calls

  1. Press to answer or hang up the call
  2. Press twice to call back
  3. Press for 5 seconds to reject an incoming call

Turn off the transmiter
If you want to listen to the car radio or when you leave the car, you can press and hold the button “⑤” ( ) for 5 seconds to turn off the FM transmiter. The FM&Bluetooth functon will turn off then, but the charge function will still work.
Activate phone voice assistance
Press and hold for 5 seconds to activate phone voice assistance, such as SIRI&Google assistance.
Charge
The charging port marked with QC 3.0 supports fast charge 3.0, the port marked with “PD” supports type C PD 20W fast charge.

FCC STATEMENT

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.

CORRECT DISPOSAL OF THIS PRODUCT

waste Electrical & Electronic Equipment) This making shown on the product or its literature indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly b promoting the sustain enable reuse of material resources. Household users should contact either the retailer where they purchased this product or their local government office for details of where and how they can take this item for environmentally safe recycling. Business users should contact the r supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals